48 Results
The high-performance R&S®FSW signal and spectrum analyzer helps engineers accomplish the most demanding tasks. Its wide internal analysis bandwidth allows the characterization of wideband components and communications systems. Its unparalleled phase noise facilitates the development of high-performance oscillators such as those used in radars. A state-of-the-art multitouch display with gesture support ensures straightforward and intuitive operation. An embedded SCPI recorder enables easy creation of executable scripts.
This document provides the technical specifications of the R&S®FSW signal and spectrum analyzer.
Specifications for the R&S®FSW-K17 Multicarrier Group Delay Measurements option for the R&S®FSW signal and spectrum analyzer
Reference measurements for calibrating navigation receivers, Production test measurements of ILS/VOR ground stations, Measurement and calibration of ramp testers
160 MHz Real-time spectrum analyzer option
This document provides the technical specifications of the R&S®VSE-K149/FSx-K149 high rate pulse repetition frequency ultrawideband measurements.
Equipped with the R&S®FSW-B512R real-time spectrum analyzer option, the R&S®FSW displays RF spectra seamlessly and in real time.
160 MHz Real-Time Measurement Application, POI > 15 μs
Market-leading EVM performance in millimeter wave range
DOCSIS testing requirements include supporting a full channel load and coexistence of both DOCSIS 3.0 and DOCSIS 3.1 signals (in some cases analog TV as well). The R&S®CLGD is the only flexible and compact solution available on the market that can meet these testing requirements. The introduction of much wider bandwidths for DOCSIS 3.1 along with higher constellation modes (up to 16kQAM) require very powerful spectrum and signal analyzers. The R&S®FSW is ideal since it can measure MER that is typically 57 dB and higher and also provide BER measurements based on DOCSIS 3.1 signals.
Technical specifications of the R&S®FSW-K201 OneWeb Reverse Link (SC-FDMA) measurement application for the R&S®FSW signal and spectrum analyzer
Tackling a standard with wide bandwidth and high frequency
English (PD 3607.1842.22)
English (PD 3606.7724.22)
This document provides the technical specifications of the R&S®FSW-K95/-K97 WLAN IEEE 802.11ad/ay measurement application.
English (PD 5214.6616.22)
This document provides the technical specifications of tthe R&S®VSE-K6 pulse measurement application.
R&S®FSW-B512R real-time spectrum analyzer 512 MHz, R&S®FSW-B800R real-time spectrum analyzer 800 MHz, R&S®FSW-K161R real-time spectrum measurement application 160 MHz, R&S®FSW-K512RE real-time spectrum measurement application 512 MHz, R&S®FSW-K800RE real-time spectrum measurement application 800 MHz
This document provides the technical specification of the EMI measurement application for signal and spectrum analyzers – R&S®FSW-K54, R&S®FSV3-K54, R&S®FPL1-K54, R&S®FSV-K54.
The EMI measurement application (K54 option) adds EMI precompliance measurement functions to the following spectrum analyzers: R&S®FSW, R&S®FSVA3000, R&S®FSV3000, R&S®FPL1000 and R&S®FSVR. It is the ideal EMI analysis extension for product development and a smooth certification process. Typical application fields include commercial, automotive, avionics and military product development (CISPR, EN, FCC, DO‑160 and MIL-STD-461 standards).
This document provides the technical specifications of the phase noise measurement application: R&S®FSW-K40, R&S®FSMR3-K40, R&S®FSV3-K40, R&S®FPS-K40, R&S®FSV-K40, R&S®FPL1-K40.
Technical specifications of the noise figure measurement options: R&S®FSW-K30, R&S®FSWP-K30, R&S®FSMR3-K30, R&S®FSV3-K30, R&S®FPS-K30, R&S®FSV-K30, R&S®FPL1-K30.
This document provides the technical specifications of the R&S®FS-SNS smart noise sources.
This document provides the technical specifications of the R&S®VSE-K7/Fxx-K7/RTO AM/FM/PM modulation analysis option.
This document provides an overview of the Rohde & Schwarz spectrum Analyzer portfolio.
T&M solution guide for network infrastructure equipment providers
This document provides the technical specifications of the VSE-K144 / -K146 / -K148 / -K171 / -K175 / FSx-K144 / -K145 / -K147 / -K148 / -K171 / -K175 / FPS-K144 / -K148 5G NR measurement application
This document provides the technical specifications of the R&S®FSx-K8 Bluetooth® measurement application.
This document provides the technical specifications of the R&S®VSE-K60/R&S®FSx-K60 transient measurement application, the R&S®VSE-K60C/R&S®FSx-K60C transient chirp measurements, the R&S®VSE-K60H/R&S®FSx-K60H transient hop measurements and the R&S®FSx-K60P transient phase noise measurements.
Rohde & Schwarz has signal generation and analysis solutions that cover millimeterwave frequencies and beyond. Our signal generation and analysis solution portfolio addresses the bandwidth and frequency requirements for 5G and beyond, offering a wide range of features and application software for any testing challenge.
This document provides the technical specifications of the R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT measurement application.
Rohde & Schwarz signal and spectrum analyzers equipped with the R&S®FSx-K30 option form the basis of a solution to accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.
This document provides the technical specifications of the R&S®FSx-K18x amplifier measurements.
Rohde & Schwarz helps engineers develop and test satellite transponders, modules and components by providing the test and measurement solutions that the satellite market needs.
The R&S®VSE-K96 OFDM analysis software adds the capability to include modulation measurements on general OFDM signals. The OFDM demodulator is user-configurable and standard-independent.
High precision test solutions for todays and tomorrows ADAS-radar
This document provides the technical specifications of the R&S®FSx-K50 spurious measurement application.
The -K10x options cover the inband measurements of 3GPP LTE and LTE advanced. The R&S®VSE-K100/-K102/-K104 options provide convenient analysis due to automatic detection of modulation formats. Each signal subframe is analyzed and the QPSK, 16QAM or 64QAM modulation formats plus the length of the cyclic prefix are automatically detected and used in the analysis. The cell identity can also be automatically detected, which reduces the number of settings required by the user to a minimum.
Test and measurement solutions for in-orbit satellites: Once a communications satellite is on its target orbit, several routines need to be performed in order to ensure proper performance of the transponders in the payload. On-orbit measurements are also a vital part of live satellite maintenance. This application brochure focuses on a few important post-launch measurement setups where Rohde & Schwarz offers unique instruments.
This document provides the technical specifications of the R&S®VSE-K10, R&S®FSx-K10 GSM measurements
Choosing the right instrument for your application
Active electronically scanned array and antenna testing
This document provides the technical specifications of the R&S®VSE-K91/FSx-K91/FPS-K91 WLAN IEEE 802.11a/b/g/j/p/n/ac/ax/be measurement application.
This document provides the technical specifications of the R&S®VSE-K70x/FSx-K70x/FPx-K70x vector signal analysis application.
Enhanced Specifications for AM/FM/φM Modulation Analysis
The measurement setup includes an R&S®FSW or R&S®FSV(A)3000 signal and spectrum analyzer or R&S®VSE compliant instruments with an R&S®SMW200A, R&S®SMM100A or R&S®SMBV100A vector signal generator. The closed loop system enables control of the signal generator and automatic synchronization.