R&S®Cable Rider ZPH

Expect fast, expect efficient

R&S®Cable Rider ZPH
Open Lightbox
R&S®Cable Rider ZPH, side view
Open Lightbox
R&S®Cable Rider ZPH, rear view
Open Lightbox
R&S®Cable Rider ZPH, side view
Open Lightbox
R&S®Cable Rider ZPH, side view
Open Lightbox
R&S®Cable Rider ZPH
Open Lightbox
R&S®ZPH product video
Open Lightbox
R&S®Cable Rider ZPH R&S®Cable Rider ZPH, side view R&S®Cable Rider ZPH, rear view R&S®Cable Rider ZPH, side view R&S®Cable Rider ZPH, side view R&S®Cable Rider ZPH

Key facts

  • Frequency range up to 3 GHz or 4 GHz, upgrade via keycode
  • One-port model features: DTF, return loss, VSWR and cable loss measurements
  • Two-port model additionally features S21 measurements, spectrum and interference analysis, AM/FM/ASK/FSK demodulation
  • Ideal for field use: up to 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)

Commençant à CHF 4'040

Brief description

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements and spectrum analysis. Two different R&S®ZPH models are available to suit different needs, a pure one-port cable and antenna analyzer and a two-port model with additional spectrum analysis and tracking generator features.

Caractéristiques & avantages

Fast

Fast operation with the R&S®Cable Rider ZPH

The R&S®Cable Rider ZPH boots up in less than 15 seconds and only needs 1 minute to warm up and can therefore begin measurement almost instantly.
The analyzer’s extremely fast measurements are the best in its class. The configuration overview menu allows you to view and change all parameter settings with just one keystroke. The fast synthesizers in the analyzer speed up measurements to 0.3 miliseconds per point.

Cable Rider ZPH
Open Lightbox

Set parameters quickly in the overview menu

Ideal for fast base station installation and maintenance: the R&S®Cable Rider ZPH

Efficient

Efficient operation with the R&S®Cable Rider ZPH

Downtime-free operation is efficient operation.
With a single full charge, the R&S®Cable Rider ZPH lasts an entire working day without needing to recharge or change the batteries.
If tasks require additional options, these can be purchased and activated without needing to send the analyzer to the service lab for an upgrade or recalibration.

Cable Rider ZPH
Open Lightbox

Efficient operation with the R&S®Cable Rider ZPH

R&S®Cable Rider ZPH with the R&S®ZN-Z103 calibration unit

Cable and antenna tester

Key capabilities for base station installation

All R&S®Cable Rider ZPH models share the same cable and antenna testing DNA: Distance-to-fault, VSWR and one port cable loss measurement is supported, as well as phase and smith chart displays of the respective measurements.

Cable Rider ZPH
Open Lightbox

R&S®Cable Rider ZPH

Base station maintenance with the R&S®Cable Rider ZPH

Spectrum analyzer

Additional features for spectrum analysis

In many cases, a field engineer needs multiple instruments to complete his tasks: a cable and antenna analyzer, a spectrum analyzer, a signal generator and a bias source. All of these instruments now combine into one powerful box with the additional features of R&S®Cable Rider ZPH Combi Analyzer (model .12.) The spectrum analyzer model also contains further measurement features, such as interference analysis and signal strength mapping.

R&S®Cable Rider ZPH
Open Lightbox

R&S®Cable Rider ZPH with R&S®HA-Z900

Interference hunting with R&S®Cable Rider ZPH and directional antenna R&S®HA-Z900

Calibration

One-step calibration

Calibration is only recommended if there are additional cables or adapters connected in between the analyzer and the device under test (DUT). This eliminates any influences on the measurement.
For convenient, one-step calibration, the R&S®ZN-Z103 calibration unit automatically switches internally between OPEN, SHORT and LOAD. This saves time and eliminates the hassle of physically changing the different calibration standards in the field.

Cable Rider ZPH
Open Lightbox

R&S®ZN-Z103 calibration unit

Portability

Weighs only 2.5 kg

With its ergonomic design, the R&S®Cable Rider ZPH has a small form factor and is lightweight. It comes with a convenient side strap to support your hand during the short measurement period. For hands-free operation, the holster (R&S®HA-Z322) comes with a harness that is carefully designed to equally distribute the weight around the body.

Cable Rider ZPH
Open Lightbox

Hands-free operation with the R&S®HA-Z322 holster

Durability

A single charge lasts for a day’s work

The R&S®Cable Rider ZPH will operate for an entire working day on a single charge. Simply charge it for approximately 4 hours and the lithium-ion battery pack will last up to 9 hours. The advantages of long battery life are obvious: the weight of an extra battery can be saved when climbing up a mast or tower and there’s no frustration due to the battery running out during a measurement.

Cable Rider ZPH
Open Lightbox

Handheld analyzer battery operation time

R&S®Cable Rider ZPH lasts longer then any other handheld analyzer on a single charge

Usability

Touchscreen gestures, non-reflective screen and backlit keypad

To enhance user experience, the user interface operates like a smart phone. The touchscreen is not limited to the menu bar; it also allows users to move the spectrum, zoom in and out of the span, add/delete markers, etc.

Cable Rider ZPH
Open Lightbox

Non-reflective screen and backlit keypad

Non-reflective screen makes it easier to work outdoors, even in bright sunlight so you can continue working though the night or under dim conditions thanks to the backlit keypad

Product Name
Frequency
CAT Functionality
S Parameter
Integrated BIAS TEE
Instrument type
Starting at
R&S®ZPH

Order number 1321.1211K02

Frequency
2 MHz - 4 GHz
CAT Functionality
DTF, reflection measurement, 1-port cable loss
S Parameter
S11
Integrated BIAS TEE
no
Instrument type
Cable and Antenna Analyzer
Starting at
R&S®ZPH 2 port model (incl. Option ZPH-K1)

Order number 1321.1211K12

Frequency
5 kHz - 4 GHz
CAT Functionality
DTF, reflection measurement, 1-port cable loss
S Parameter
S11 & S21
Integrated BIAS TEE
yes
Instrument type
Combination Analyzer (Cable and Antenna & Spectrum Analyzer)
Starting at
Specifications
Specification in brief
Frequency range R&S®Cable Rider ZPH (1-port model .02) 2 MHz to 3 GHz
     with R&S®ZPH-B4 option 2 MHz to 4 GHz
  R&S®Cable Rider ZPH (2-port combi model .12)  
     with R&S®ZPH-K1 option 5 kHz to 3 GHz
     with R&S®ZPH-B4 and R&S®ZPH-K1 options 5 kHz to 4 GHz
Frequency resolution   1 Hz
Spectrum measurement with combi model .12 only, with R&S®ZPH-K1 option
Spectral purity, SSB phase noise f = 500 MHz, carrier offset 30 kHz < –88 dBc (1 Hz), typ. –95 dBc (1 Hz)
  f = 500 MHz, carrier offset 100 kHz < –98 dBc (1 Hz), typ. –105 dBc (1 Hz)
  f = 500 MHz, carrier offset 1 MHz < –118 dBc (1 Hz), typ. –125 dBc (1 Hz)
Displayed average noise level (DANL) 0 dB RF attenuation, termination 50 Ω, RBW = 1 kHz, VBW = 10 Hz, sample detector, log scaling, normalized to 1 Hz
     frequency preamplifier = off
  1 MHz to 10 MHz < –130 dBm, typ. –135 dBm
  10 MHz to 1 GHz < –142 dBm, typ. –146 dBm
  1 GHz to 4 GHz < –140 dBm, typ. –144 dBm
     frequency preamplifier = on
  1 MHz to 10 MHz < –150 dBm, typ. –160 dBm
  10 MHz to 3 GHz < –158 dBm, typ. –163 dBm
  3 GHz to 4 GHz < –156 dBm, typ. –161 dBm
     
Maximum permissible spurious signal measurement = reflection (S11)/one-port cable loss/distance-to-fault analysis +17 dBm (nom.)
Data points selectable 101 to 2501
Reflection measurement S11
Corrected directivity with
R&S®ZN-Z103
2 MHz ≤ f ≤ 4 GHz (with R&S®ZPH-B4 option installed) > 42 dB (nom.)
Measurement speed   0.3 ms/point
Result formats   magnitude, VSWR, magnitude and distance-to-fault, VSWR and distance-to-fault
1-port cable loss measurement
Result format   magnitude
Range selectable 1/2/5/10/20/50/100/120/150 dB
Distance-to-fault analysis    
Result formats   return loss (dB), VSWR
Fault resolution   (1.5 m × 108 m × velocity factor/span)
Maximum cable length depending on cable loss 1500 m (nom.)
Maximum rated input levels
DC voltage   50 V
CW RF power model .02: port 1 (power meter input) 30 dBm
  model .12: port 1 (RF input) 20 dBm
  port 2 (reflectometer input) 23 dBm
General data
Display resolution WVGA 800 × 480 pixel
Battery (R&S®HA-Z306 option) capacity 72 Wh
  voltage 11.25 V (nom.)
  operating time with new, fully charged battery Up to 9 hrs
Dimension W × H × D 202 mm × 294 mm × 76 mm
(8.0 in × 11.6 in × 3 in)
Weight   2.5 kg (5.5 lb)

Available options

Options for model .02 & .12
Product
Description
Cable Rider ZPH-B4
R&S®ZPH-B4

Order number 1321.0380.02

Description
Frequency Upgrade
Options for model .02 only
Product
Description
R&S®ZPH-B10

Order number 1321.0396.02

Description
GPS Support
Options for model .12 only
Product
Description
R&S®ZPH-B22

Order number 1334.5627.02

Description
Preamplifier
Software options
Product
Description
FPH-K9-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png
R&S®ZPH-K9

Order number 1321.0415.02

Description
Power Sensor Support
FPH-K19-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png
R&S®ZPH-K19

Order number 1321.0409.02

Description
Channel Power Meter
FPH-K29-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png
R&S®ZPH-K29

Order number 1321.0421.02

Description
Pulse Measurements with Power Sensor
Options for model .12 only
Product
Description
ZPH-K1-Spectrum-Analysis-Measurement-Application_.png
R&S®ZPH-K1

Order number 1334.5604.02

Description
Spectrum analysis measurement application
FPH-K7-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png
R&S®ZPH-K7

Order number 1334.5633.02

Description
Modulation analysis AM/FM
(requires R&S®ZPH-K1)
FPH-K15-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png
R&S®ZPH-K15

Order number 1334.5640.02

Description
Interference Analysis
(requires R&S®ZPH-K1)
FPH-K16-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png
R&S®ZPH-K16

Order number 1334.5656.02

Description
Signal strength mapping measurement application
(requires R&S®ZPH-K1)
R&S®ZPH-K57
Description
Advanced gated trigger measurements
(requires R&S®ZPH-K1)
Accessories
Product
Description
HA-Z306 Lithium Ion Battery Pack
R&S®HA-Z306

Order number 1321.1334.02

Description
Lithium-ion battery pack, 6.4 Ah
HA-Z303 Battery Charger
R&S®HA-Z303

Order number 1321.1328.02

Description
Battery charger for R&S®HA-Z306
The battery charger is to be used for charging an additional battery outside the instrument. The internal battery is charged by the instrument itself.
HA-Z301-Spare-power-supply
R&S®HA-Z301

Order number 1321.1386.02

Description
Spare power supply, incl. mains plug for EU, UK, US, AUS, CH
HA-Z302 Car Adapter for cigarette lighter
R&S®HA-Z302

Order number 1321.1340.02

Description
Car adapter for cigarette lighter
The car adapter is suitable for both the instrument and the R&S®HA-Z303 external battery charger.
HA-Z322 Carrying holster
R&S®HA-Z322

Order number 1321.1370.02

Description
Carrying holster
HA-Z322 Rainproof carrying holster
R&S®HA-Z322

Order number 1321.1370.03

Description
Rainproof carrying holster
HA-Z220 Carrying Bag
R&S®HA-Z220

Order number 1309.6175.00

Description
Carrying bag
soft carrying bag
HA-Z321 Hard case
R&S®HA-Z321

Order number 1321.1357.02

Description
Hard Case for R&S®Spectrum Rider
RTH-Z4 Hard Shell Protective Carrying Case
R&S®RTH-Z4

Order number 1326.2774.02

Description
Hard shell protective carrying case
Dimensions: 455 mm x 368 mm x 166 mm. Weight: 2.5 kg.
HA-Z211 Spare USB cable
R&S®HA-Z211

Order number 1309.6169.00

Description
Spare USB cable
FSH-Z36 Headphones
R&S®FSH-Z36

Order number 1145.5838.02

Description
Headphones
HA-Z210 Spare Ethernet cable
R&S®HA-Z210

Order number 1309.6152.00

Description
Spare LAN cable
FSH-Z29 - calibration
R&S®FSH-Z29

Order number 1300.7510.03

Description
Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement
DC to 3.6 GHz forR&S®FSH4/R&S®FSH8
ZN-Z103 Calibration Unit
R&S®ZN-Z103

Order number 1321.1828.02

Description
Calibration unit, 1 port, N (f), 2 MHz to 4 GHz
RAM_front.jpg
R&S®RAM

Order number 0358.5414.02

Description
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
RAZ_front.jpg
R&S®RAZ

Order number 0358.5714.02

Description
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
R&S®FSH-Z38

Order number 1300.7740.02

Description
Matching pad 50/75 Ω, L section, N to BNC
bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W
R&S®Adapter BNC N

Order number 0118.2812.00

Description
N - BNC Adapter (N male - BNC female)
R&S®Adapter N

Order number 0092.6581.00

Description
N - Adapter (N male - N male)
R&S®Adapter SMA N

Order number 4012.5837.00

Description
N- Adapter (N male - SMA female)
R&S®Adapter N1 6 F

Order number 3530.6646.00

Description
N - Adapter (N male - 7/16 female)
R&S®Adapter N 16 M

Order number 3530.6630.00

Description
N - Adapter (N male - 7/16 male)
R&S®Adapter N FME F

Order number 4048.9790.00

Description
N - Adapter (N male - FME female)
R&S®Adapter N BNC M

Order number 0017.6742.00

Description
N - BNC Adapter (BNC male - banana female)

Order number 1035.1700.52

Description
High-Power Attenuator, 50 W
0 Hz to 6 GHz, 20 dB
R&S®RBU100

Order number 1073.8495.03 (3 dB) / 1073.8495.06 (6 dB) / 1073.8495.10 (10 dB) / 1073.8495.20 (20 dB) / 1073.8495.30 (30 dB)

Description
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Antenna and antenna accessories
Product
Description
HA-Z340 GPS receiver
R&S®HA-Z340

Order number 1321.1392.02

Description
GPS Receiver for R&S®Spectrum Rider
HA-Z1900 Yagi antenna
R&S®HA-Z1900

Order number 1328.6825.02

Description
Yagi antenna, 1710 MHz to 1990 MHz
HA-Z900 Yagi antenna
R&S®HA-Z900

Order number 1328.6283.02

Description
Yagi antenna, 824 MHz to 960 MHz
HA-Z901-RF-cable
R&S®HA-Z901

Order number 3626.2757.02

Description
RF cable (length: 1 m), DC to 6 GHz, N male/N male connectors
HA-Z902-Carrying-bag
R&S®HA-Z902

Order number 1328.6883.02

Description
Carrying bag for R&S®HA-Z900 or R&S®HA-Z1900 Yagi antenna
HE400BC-Basic-Handheld-Directional-Antenna_img-01.jpg

Order number 4104.6000K04

Description
Antenna
Basic Handheld Directional Antenna
R&S®HE400KB

Order number 4104.7770.04

Description
Cable set for R&S®HE400BC (requires R&S®HE300USB)
HE400_Handheld_Directional_Antenna_img1.jpg

Order number 4104.6000K02

Description
Antenna
Handheld Directional Antenna
R&S®HE400-K

Order number 4104.7770.02

Description
Cable set for R&S®HE400BC (requires R&S®HE300USB)
HE400HF HF antenna module
R&S®HE400HF

Order number 4104.8002.02

Description
HF antenna module, 8.3 kHz to 30 MHz
(handle to be bought separately)
HE400VHF VHF antenna module
R&S®HE400VHF

Order number 4104.8202.02

Description
VHF antenna module, 20 MHz to 200 MHz
(handle to be bought separately)
HE400UWB UWB antenna module
R&S®HE400UWB

Order number 4104.6900.02

Description
UWB antenna module, 30 MHz to 6 GHz
(handle to be bought separately)
HE400LP Log-periodic antenna module
R&S®HE400LP

Order number 4104.8402.02

Description
Log-periodic antenna module, 450 MHz to 8 GHz
(handle to be bought separately)
HE400CEL Cellular antenna module
R&S®HE400CEL

Order number 4104.7306.02

Description
Cellular antenna module, 700 MHz to 2.5 GHz
(handle to be bought separately)
HE300USB USB adapter
R&S®HE-300USB

Order number 4080.9440.02

Description
USB adapter, for R&S®HE300/R&S®HL300
R&S®HA-Z350

Order number 1321.1405.02

Description
Log-periodic OEM antenna, 700 MHz to 4 GHz
R&S®FSH-Z320

Order number 1309.6600.00

Description
RF cable (length: 1 m), DC to 8 GHz, armored, N male/N female connectors
for R&S®FSH-K41 option
R&S®FSH-Z321

Order number 1309.6617.00

Description
RF cable (length: 3 m), DC to 8 GHz, armored, N male/N female connectors
for R&S®FSH-K41 option
R&S®TS-EMF

Order number 1158.9295.05

Description
Portable EMF measurement system
Hard Case
TSEMF-B1 Isotropic antenna 30 MHz

Order number 1074.5719.02

Description
Isotropic antenna, 30 MHz to 3 GHz, for R&S®TS-EMF
(Delivered with individual calibration data (factory calibration) as standard.)
TSEMF-B2 Isotropic antenna 700 MHz

Order number 1074.5702.02

Description
Isotropic antenna, 700 MHz to 6 GHz, for R&S®TS-EMF
(Delivered with individual calibration data (factory calibration) as standard.)
TSEMF-B3 Isotropic antenna 9kHz

Order number 1074.5690.02

Description
Isotropic antenna, 9 kHz to 200 MHz, for R&S®TS-EMF
(Delivered with typical calibration data as standard.)
TSEMF-CV Converter cable

Order number 1158.9250.02

Description
Converter cable
HZ15_front.jpg

Order number 1147.2736.02

Description
E and H near-field probe set
HZ-17 H-field near-field probe set

Order number 1339.4141.02

Description
H near-field probe set
HZ-16-preamplifier_46845_02_img01.jpg

Order number 1147.2720.02

Description
Preamplifier
100 kHz to 3 GHz, 20 dB gain, for R&S®HZ-15 and R&S®HZ-17 probe sets
ZV-Z93_front.jpg
R&S®ZV-Z93

Order number 1301.7595.25

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 635 mm (25 in)
ZV-Z93_front.jpg
R&S®ZV-Z93

Order number 1301.7595.38

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 965 mm (38 in)
ZV-Z193 Test port cable

Order number 1306.4520.24

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 610 mm (24 in)
ZV-Z193 Test port cable

Order number 1306.4520.36

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 914 mm (36 in)
ZV-Z193 Test port cable

Order number 1306.4520.60

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 1524 mm (60 in)
R&S®ZV-Z95

Order number 1301.7608.25

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 635 mm (25 in)
R&S®ZV-Z95

Order number 1301.7608.38

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 965 mm (38 in)

Order number 1306.4536.24

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 610 mm (24 in)

Order number 1306.4536.36

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) - 2.92 mm (m), length 914 mm (36 in)
Power sensor
Product
Description
FSH-Z14_front.jpg

Order number 1120.6001.02

Description
Directional power sensor
25 MHz to 1 GHz
FSH-Z44_front.jpg

Order number 1165.2305.02

Description
Directional power sensor
200 MHz to 4 GHz
NRPZ211_front.jpg

Order number 1417.0409.02 / 1417.0409.04

Description
Two-Path diode power sensors
Universal power sensor, 10 MHz to 8 GHz, 100 mW, two-path
NRPZ221_front.jpg

Order number 1417.0309.02

Description
Two-Path Diode Power Sensors
Universal power sensor, 10 MHz to 18 GHz, 100 mW, two-path
NRPZ81_front.jpg

Order number 1137.9009.02

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
NRPZ85_front.jpg

Order number 1411.7501.02

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
NRPZ86_front.jpg

Order number 1417.0109.40

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
NRPZ86var44_front.jpg

Order number 1417.0109.44

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
NRP8S_img.jpg

Order number 1419.0006.02

Description
Three-path diode power sensor
For USB operation
NRP18S_front.jpg

Order number 1419.0029.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP33S_front.jpg

Order number 1419.0064.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP40S_img.jpg

Order number 1419.0041.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP50S_img.jpg

Order number 1419.0087.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP18T_Thermal_power_sensor_img1.jpg
R&S®NRP18T

Order number 1424.6115.02

Description
Thermal power sensor
300 nW to 100 mW, DC to 18 GHz
NRP33T_Thermal_power_sensor_img1.jpg
R&S®NRP33T

Order number 1424.6138.02

Description
Thermal Power Sensor
300 nW to 100 mW, DC to 33 GHz
NRP40T_Thermal_power_sensor_img1.jpg
R&S®NRP40T

Order number 1424.6150.02

Description
Thermal Power Sensor
300 nW to 100 mW, DC to 40 GHz
NRP50T_Thermal_power_sensor_img1.jpg
R&S®NRP50T

Order number 1424.6173.02

Description
Thermal Power Sensor
NRP67T_Thermal_power_sensor_img1.jpg
R&S®NRP67T

Order number 1424.6196.02

Description
Thermal Power Sensor
NRP110T_Thermal_power_sensor_img1.jpg
R&S®NRP110T

Order number 1424.6215.02

Description
Thermal Power Sensor
NRP6A_Average_power_sensors_img1.jpg

Order number 1424.6796.02

Description
Average Power Sensor
100 pW to 200 mW, 8 kHz to 6 GHz
NRP18A_Average_power_sensors_img1.jpg

Order number 1424.6815.02

Description
Average Power Sensor
100 pW to 200 mW, 8 kHz to 18 GHz
Power sensor adapter cable
Product
Description
FSH-Z144 USB adapter cable
R&S®FSH-Z144

Order number 1145.5909.02

Description
USB adapter cable
for R&S®FSH-Z14/R&S®FSH-Z44 power sensors

Order number 1146.8001.02 / 1146.8001.04 / 1146.8001.06 / 1146.8001.11

Description
USB Adapter (passive)
For all R&S®NRP-Z sensors. The R&S®NRPZ4 passive USB adapter provides all basic functions, as it handles the transmission of settings and measurement data as well as the power supply of the sensor via the USB bus. Available cable lengths: Available cable lengths: 2.0m, 0.5m and 0.15m Available cable length for panel-mount: 1m
NRP-ZKU USB interface cable
R&S®NRP-ZKU

Order number 1419.0658.03

Description
USB interface cable, length: 1.5 m
Optical power sensor and accessories
Product
Description
HA-Z360-OEM-USB-Optical-Power-Meter
R&S®HA-Z360

Order number 1334.5162.00

Description
OEM USB Optical Power Meter (Germanium)
HA-Z361-OEM-USB-Optical-Power-Meter
R&S®HA-Z361

Order number 1334.5179.00

Description
OEM USB Optical Power Meter (filtered InGaAs)
HA-Z362-SC-Adapter
R&S®HA-Z362

Order number 1334.5185.00

Description
SC Adapter for Optical Power Meter
HA-Z363-LC-Adapter
R&S®HA-Z363

Order number 1334.5191.00

Description
LC Adapter for Optical Power Meter
HA-Z364-2.5-mm-Universal-Adapter
R&S®HA-Z364

Order number 1334.5204.00

Description
2.5 mm Universal Adapter for Optical Power Meter
HA-Z365 Universal adapter for optical power meter
R&S®HA-Z365

Order number 1334.5210.00

Description
1.25 mm Universal Adapter for Optical Power Meter
HA-Z366-Patch-Cord
R&S®HA-Z366

Order number 1334.5227.00

Description
Patch Cord SC-LC SM, SX, length: 1 m
HA-Z367 Patch Cord
R&S®HA-Z367

Order number 1334.5233.00

Description
Patch Cord SC-SC SM, SX, length: 1 m

Related videos

Analyse approfondie de CERTIUM® ANALYSIS

La large gamme de solutions de test et mesure RF et numériques de Rohde & Schwarz, à la fois pour configurer et entretenir la chaîne de communication complète de l'ATC.

avr. 14, 2021

Vidéo produit relative aux fonctions du R&S®ZPH

févr. 22, 2019

Vidéo produit du R&S®ZPH

oct. 09, 2018

Further information

Spectrum & Vector network analyzers promotion

Widest variety of fully equipped products up to 48% off, now until August 31st, 2021

More information

Mobile network testing

Mobile network testing solutions from Rohde & Schwarz let you reconcile your current and future dilemmas.

More information

Teaching-Software for Multi-User Student Labs

The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.

More information

Demander des informations

Vous avez des questions ou besoin d'informations supplémentaires ? Remplissez simplement ce formulaire et nous vous recontacterons rapidement.

Je souhaite recevoir des informations de Rohde & Schwarz via

Marketing de permission

Qu'est ce que cela signifie en détail ?

Je reconnais que les entités ROHDE & SCHWARZ GmbH & Co. KG et ROHDE & SCHWARZ ou toute autre société subsidiaire mentionnée au sein de ce site Internet, peuvent me contacter par le moyen de leur choix (email ou courrier) pour des raisons marketing et publicitaires (par exemple pour des informations sur des offres spéciales et des promotions) en relation avec, mais pas uniquement, des produits et des solutions dans les domaines du test et mesure, des communications sécurisées, de la surveillance et test des réseaux, des broadcasts et médias, ainsi que de cybersécurité.

Vos droits

Cette déclaration de consentement peut être révoquée à tout moment par l'envoi d'un courriel portant, dans son objet, la mention "Unsubscribe" (désinscription) à news@rohde-schwarz.com. En outre, chaque courriel envoyé contient un lien vers une fonction de désinscription de publicités ultérieures adressées par courrier électronique. La "Déclaration de confidentialité" expose plus en détail l'utilisation des données personnelles, ainsi que la procédure de révocation de consentement.

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.
Informations générales et conditions d'utilisation du site Web

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

Prix : 1x oscilloscope numérique R&S®RTB2000

6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.