R&S®SMA100B RF and microwave signal generator

The R&S®ENV216 two-line V-network meets the requirements of CISPR 16-1-2 and EN 55016-1-2 for V-networks with a simulated impedance of (50 μH + 5 Ω) || 50 Ω in the frequency range from 9 kHz to 30 MHz as well as the ANSI C63.4 in the frequency range from 150 kHz to 30 MHz. A female connector with protective earth contacts is provided for connecting the EUT. Various models with country-specific connector systems are available.

The R&S®THU9/R&S®THV9 UHF/VHF high-power transmitters make terrestrial TV and digital audio broadcasting extremely efficient. They are 42 % more energy efficient for UHF broadcasting and up to 50 % more for VHF. The transmitters have very flexible configurations, are easy to operate and have a very small footprint. Network operators can see cost reductions over the entire life of the system.

Rohde & Schwarz offers A/V T & M instruments covering the entire value chain from R&D to production: HDMI, MHL, analog video & audio test.

High-end vector signal generator for research, development and production of communication systems with RF characteristics and baseband characteristics.

This document provides the technical specifications of the R&S®SMB100B signal generator.

R&S®SMB100B RF and microwave signal generator

The PR100 operates from 9 kHz to 7.5 GHz and is designed for radiomonitoring applications in the field.

SHF directional antenna with downconverter – for locating transmitters and interference sources in the frequency range from 7.5 GHz to 18 GHz.

The R&S®RTO1000 is the preceding model of the R&S®RTO2000 Oscilloscope. Find manuals, drivers, firmware and software for the R&S®RTO1000 here.

R&S®SpycerNode SC media storage is ideal for high performance applications in post production and studio environments. Click to learn more.

The SZV100A Q/V band RF Upconverter is used to provide modulated signals in the frequenncy range from 36 GHz to 56 GHz for testing 5G and satellite components and satellite payloads

Multi-element VHF/UHF direction-finding (DF) antenna with superior accuracy

The R&S®UMS175 combines state-of-the-art receiver technology with TDOA capabilities and a control PC in a compact all-weather cabinet.

The R&S®FSVR combines a full-featured signal and spectrum analyzer with a real-time spectrum analyzer.

Coupling network for measurement of asymmetrical (common mode) disturbance voltage on telecommunications ports for Cat 6 cable category.

Disturbance current and shielding effectiveness measurements in the frequency range 9 kHz to 600 MHz.

Spectrum analyzer, 9 kHz to 18 GHz (overrange 20 GHz) - high-end functions in an extremely lightweight, compact package

The ESL is a compact, cost-effective measuring receiver. It includes all of the functions, bandwiths and weighting detectors that are needed to make EMC measurements in accordance with commercial standards.

Broadband impedance matching unit for test receivers and spectrum analyzers with low-impedance inputs.

Coupling network for measuring asymmetrical (common mode) disturbance voltage.

The Power Sensors R&S®NRP-Z11 and R&S®NRP-Z21 fuse multiple-path architecture, multiple-diode technology and a simultaneously scanning multichannel measurement system into a unique high-performance concept.

R&S®NRP-Z211/Z221 Two-path diode power sensors as cost-effective power measurement solution for production.

The R&S NRP-Z51 is the world’s first power sensor to combine the thermal test cell with a complete power meter. The sensor features not only all the advantages of the thermal measuring principle but also a further increase in accuracy since the influence of the base unit is eliminated.

The Power Sensor R&S NRP-Z91 is designed for measuring average power in a very wide frequency range. In particular, it covers the frequency bands relevant for terrestrial radio communication.

The R&S®NRP-Z81 wideband power sensors are ideal for applications where pulse characteristics as well as output power have to be measured.

The compact, robust R&S®NRP2 base unit with color display supports up to four R&S®NRP-Zxx power sensors and all sensor-dependent measurement functions.

The audio analyzers R&S UP300 and R&S UP350 are SmartInstruments with a frequency range up to 80 kHz.

The audio analyzers R&S UP300 and R&S UP350 are SmartInstruments with a frequency range up to 80 kHz.