R&S®ZNB3000 vector network analyzer

Fast forward to results

Key Facts

Frequency ranges from 9 kHz up to 54 GHz
Two or four ports
Wide dynamic range of up to 150 dB
Ultrafast sweep cycle times of 11.8 ms (1601 points, 1 MHz to 26.5 GHz)
High output power: 11 dBm @ 26.5 GHz

Solicitar presupuesto Configure your product

Maximum throughput with ultrafast measurement cycles

With frequency ranges from 9 kHz to 4.5 GHz, 9 GHz, 20 GHz, 26.5 GHz, 32 GHz, 43.5 GHz and 54 GHz the R&S®ZNB3000 vector network analyzers are ideal for applications in the communications, aerospace and defense industries. High-volume production of RF components and short ramp-up times is the environment where the R&S®ZNB3000 shines and delivers maximum results. The R&S®ZNB3000 has a flexible upgrade concept to rapidly scale up and adapt to your requirements. The measurement speed, stability, outstanding RF performance and extended functions make the R&S®ZNB3000 the instrument to get the job done.

Quick Links

Available Models
Available Options
Show all Downloads

Features & benefits

Ultrafast measurement speed

Maximum throughput with ultrafast measurement cycles

It offers a combination of a fast DDS-based synthesizer, the best dynamic range in class and efficient backend data handling results with extremely high measurement throughput. The R&S®ZNB3020 can perform a frequency sweep from 1 MHz to 26.5 GHz, 1601 points, 500 kHz IF bandwidth with full two port error correction in a total measurement time of 21.2 ms. It is the instrument of choice for high volume production, where low test per second costs and high throughput are essential.

**Front-end module test with the R&S®ZNB3000**

Best dynamic range in class

Ideal for filter characterization

The measurement speed for filter tests is determined by the synthesizer settling times, the required dynamic range and the corresponding IF bandwidth. The R&S®ZNB3020 offers an innovative enhanced dynamic range mode that allows the use of higher IF bandwidths with the same trace noise magnitude values as conventional VNAs, leading to improved measurement throughput.

Fast production scale-up

Flexible frequency upgrade options

Additional frequency ranges and the easy frequency upgrade concept assure rapid scale-up of production and protect your investment for the long run. Regardless of test requirements, die level, packaged or connectorized, the R&S®ZNB3000 is the preferred instrument of RF component manufacturers world-wide.

Unrivaled RF performance

Designed to meet the toughest challenges

The R&S®ZNB3000 was designed with the toughest testing challenges in mind and developed for high-volume production applications. It balances speed, stability and performance. The combination of high output power, +11 dBm at 26.5 GHz, innovative extended dynamic range mode, exceptionally low trace noise (typically 0.0008 dB RMS) and fast sweep times makes it ideal for throughput, yield and accuracy.

Multiport measurements

Measurements up to 48 ports

Components used in modern communications equipment support a growing number of frequency bands and additional functions. As a result, the number of RF ports on the modules is also growing. The R&S®ZNB3000 in combination with various switch matrices provides a comprehensive solution for complex measurements on modules with up to 48 ports. The matrices from Rohde & Schwarz support full crossbar measurements, allowing all S-parameters of a multiport DUT to be determined.

**R&S®ZNB3020 & R&S®ZN-Z86 switch matrix 48 ports**

SCPI recorder

Accelerating test automation

The R&S®ZNB3000 simplifies programming. The integrated SCPI recorder notes each keypress and creates a list of step-by-step commands even for the most complicated measurement setup. The recorded SCPI script can be directly copied into the user code or exported in C, Python and MATLAB.

Versatile options

Fast and accurate characterization of active and passive RF components

The R&S®ZNB3000 is ideal for testing passive, active and frequency-converting components. A variety of hardware and software options are available for these measurements. Hardware options include two independent internal generators, a wide power sweep range and extended dynamic range in two or four port configurations. The software options include compression point vs frequency, noise figure measurements, intermodulation distortion measurements and intuitive measurement configuration. Time domain measurement options with eye diagrams and frequency-converting measurements are also available. A comprehensive list of embedding/deembedding options round off the vector network analyzer functions.

High temperature and long-term stability

The R&S®ZNB3000 test set and receivers feature excellent temperature and long-term stability. Magnitude and phase drift are very low, with typical values of less than 0.01 dB/°C and 0.15°/°C. A calibrated R&S®ZNB3000 allows precise measurements over several days without recalibration.

Available models

Available options

Applications of the R&S®ZNB3000

Unlock the potential of your high-speed designs

Cable testing
Interconnect testing
PCB testing

Watch Video

Maximum throughput with ultrafast measurement cycles

RF component production
Filter and passive component testing
Front-end module and active component testing

Watch Video

Related videos

Characterizing a high-speed cable with the ZNB3000

Characterizing a high-speed cable with the R&S®ZNB3000

Two-tone intermodulation measurement with ZNB3000

Two-tone intermodulation measurement with R&S®ZNB3000

Compression point measurement with ZNB3000

Compression point measurement with R&S®ZNB3000

R&S®ZNB3000 family introduction

R&S®ZNB3000 feature presentation – maximized throughput

R&S®ZNB3000 feature presentation - maximized throughout

R&S®ZNB3000 calibration demonstration

R&S®ZNB3000 GUI demonstration

Webinar: Keep up to date with CISPR Automotive EMI standards

Characterizing a high-speed cable with the R&S®ZNB3000

Solicitar información

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.
For service/support requests, please go here to log in or register.

Sr.

Sra.

Sin especificar

Nombre

Apellidos

Correo electrónico

Empresa

País

Teléfono (p. ej. +34 91 01235678)

Ciudad

Consulta

Email confirmation (optional)

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.

An error is occurred, please try it again later.

Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.

R&S®ZNB3000 vector network analyzer

Fast forward to results

Maximum throughput with ultrafast measurement cycles