R&S®FE110SR Frontend

SUB-TERAHERTZ, ABOVE EXPECTATIONS

R&S®FE110SR Frontend
Ingrandisci immagine
R&S®FE110SR Frontend
Ingrandisci immagine
R&S®FE110SR Frontend
Ingrandisci immagine
R&S®FE110SR Frontend
Ingrandisci immagine
R&S®FE110SR Frontend
Ingrandisci immagine
R&S®FE110SR Frontend
Ingrandisci immagine
R&S®FE110SR Frontend, Front Low R&S®FE110SR Frontend, Back low R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view

Key Facts

  • Fully calibrated solution
  • Ease of operation
  • Fully automated
  • Smart accessories
  • Compact form factor

Frequency extension to 110 GHz

The R&S®FE110SR is ideal for demanding applications up to 110 GHz. Once connected, the frequency range of the R&S®FSW signal and spectrum analyzer and the R&S®RTP  oscilloscope are extended to the W-Band frequency range (70 GHz to 110 GHz). The easy-to-use, fully-calibrated solution is compatible with our analyzer and oscilloscope environments. Plug it in and start designing and testing the next generation automotive radar or mobile communications today.

Features & benefits

Fully calibrated solution

The R&S®FE110SR is designed as an external frontend for the R&S®FSW signal and spectrum analyzer and the R&S®RTP oscilloscope. Every R&S®FE110SR is fully characterized during production. As soon as the R&S®FE110SR is connected via LAN, the correction data stored in the frontend is automatically transferred to the base unit. This ensures a fully calibrated  solution. and reduces the time and equipment needed for setup and calibration while enhancing measurement fidelity.

Ingrandisci immagine

R&S®FSW with connected frontend

Ease of operation

The R&S®FE110SR fits seamlessly into the operating concept of the R&S®FSW signal analyzer and R&S®RTP oscilloscope. Only three connections (LAN, IF and REF frequency) between frontend and base units are required. Setting up automated measurements is easy and reliable because multiple instruments do not need to be programmed. 

Ingrandisci immagine

Excellent signal performance

Generating wideband-modulated signals with excellent modulation quality is essential when developing products for next generation automotive radar or mobile communication. The R&S®FE110SR has outstanding modulation quality. A  5G NR signal with a channel bandwidth of 2 GHz (960 kHz SCS) and QPSK modulation can be analyzed with an EVM better than -39 dB (at 88 GHz). This excellent modulation quality is maintained over a wide dynamic range. 

Ingrandisci immagine

EVM values versus output power at different center frequencies

Smart accessories

External bandpass filters optimize spur performance and are available as options for the R&S®FE110ST and R&S®FE110SR. The R&S®FE110-Zxx waveguide bandpass filters have low insertion loss and an excellent voltage standing wave ratio. Device characteristics are stored on an EPROM. A cable connection provides data to the base instruments. This data is automatically considered by the base units for a fully calibrated solution.

Ingrandisci immagine

FE110SR with connected bandpass filter FE110-Zxx

Compact form factor

The compact design allows the R&S®FE110ST to be positioned closely to the device under test. This minimizes the length of additional RF feed lines that can increase losses. Short distance to the DUT reduces the level ripple over frequency and improves signal quality. The R&S®ZZA-FE01 frontend height adjustement has adjustable feet and versatile mounting points which allow flexible positioning of the R&S®FE110ST in a chamber.  

Ingrandisci immagine

Mounted frontend with R&S®ZZA-FE01 frontend height adjustement

Multichannel analysis

For multichannel test setups, connect up to four R&S®FExx modules to the R&S®RTP oscilloscope. Select between “Coupled LO” or “Coupled Ref” signal to sychronize the external Frontend modules. Perform your multichannel signal analysis based on the IQ data of the R&S®RTP-K11 IQ SW interface option or with dedicated analysis options of the R&S®VSE analysis software such as the R&S®VSE-K146 5G MIMO measurement option.

Ingrandisci immagine

R&S®RTP oscilloscope with two R&S®FE110SR modules

Available options

External accessories
Product
Descrizione
R&S®FE110-Z10

Order Number 1348.5230.02

Descrizione

Bandpass filter

External bandpass filter (70-86 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z01

Order Number 1348.5147.02

Descrizione

Bandpass filter

External bandpass filter (75–90 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z02

Order Number 1348.5153.02

Descrizione

Bandpass filter

External bandpass filter (80–95 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z03

Order Number 1348.5160.02

Descrizione

Bandpass filter

External bandpass filter (85–105 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z04

Order Number 1348.5199.02

Descrizione

Bandpass filter

External bandpass filter (94-110 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z20

Order Number 1348.5224.02

Descrizione

WR10 waveguide-to-waveguide adapter

Waveguide section straight. Length: 40mm

R&S®WCA110

Order Number 3626.1067.02

Descrizione

Waveguide Coax Adapter, WR10 to 1 mm (f)

75 GHz to 110 GHz

R&S®WCA110

Order Number 3626.1067.03

Descrizione

Waveguide Coax Adapter, WR10 to 1 mm (m)

75 GHz to 110 GHz

R&S®SGH110G20

Order Number 1537.3262.02

Descrizione

Standard gain horn antenna

75 to 110 GHz, 20 dBi Connector waveguide WR10 

R&S®SGH110G25

Order Number 1538.5852.03

Descrizione

Standard gain horn antenna 

75 to 110 GHz, 25 dBi Connector waveguide WR10

Mechanical accessories
Product
Descrizione
R&S®ZZA-FE01

Order Number 1348.5330.02

Descrizione

Frontend height adjustment

Height adjustment and mounting kit for external frontends. 
Horizontal or vertical assembly possible.

Tools
Product
Descrizione
R&S®ZCTW

Order Number 1175.2014.02

Descrizione

Torque wrench for waveguide flange screws

Related videos

Towards 6G: MIMO measurements up to 110 GHz

This video demonstrates signal transmission and analysis of a 2x2 MIMO signal at 90 GHz.

mar 12, 2024

Noise Figure and Gain Measurements of amplifiers from 75 GHz to 110 GHz

This video shows how to measure noise figure and gain of an amplifier at around 90 GHz using the smart noise source R&S FS-SNS110 and the external frontend R&S FE110SR in combination with a spectrum analyzer.

mar 11, 2024

Signal generation and analysis up to 110 GHz with frontends

This video shows the excellent signal performance and the support of swept measurements and local oscillator coupling of the FE frontend series.

mar 11, 2024

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.