ダウンロード

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.

English - 2020/05/26

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 2017/12/24

This application note provides a brief introduction into the capabilities of the Rohde & Schwarz Vector Signal Generators (VSG) to create user defined digitally modulated signals called Custom Digital Modulation (CDM).

English - 2017/07/24

This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB.

English - 2017/06/12

This application note describes how all required transmitter (Tx) tests can be performed quickly and easily by using signal and spectrum analyzers.

English - 2016/05/11

Generation of IEEE 802.15.4 Signals

English - 2016/01/08

Noise Power Ratio is a tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device.

English - 2015/11/06

Assisting Tools for Operation of Windows-Based T&M Instruments

English - 2013/06/13

This application note explains how to set up a vector signal generator for LTE FDD repeater conformance testing accordingg to various test cases defined in the 3GPP Technical Specification 36.143.

English - 2013/04/26

This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.

English - 2013/04/26

The R&S MATLAB® Toolkit for Signal Generators provides scripts and routines for remote controlling Rohde & Schwarz signal generators. For example, it includes a MATLAB® script that turns I/Q vectors into the R&S waveform file format for use with an ARB generator.

English - 2013/04/25

IQWizard - IQ Signal Measurement and Conversion

English - 2013/04/25

This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.

English - 2013/04/25

This application note provides insight into some of these specifications and how test and measurement equipment can simplify the task of deriving requirements for RF sub-systems.

English - 2013/04/10

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally.

English - 2013/03/28

Development Hints and Best Practices for Using Instrument Drivers

English - 2013/01/01

Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting

English - 2012/12/20

In this application note we explain how to test FPGA-based hardware emulators using Rohde & Schwarz vector signal generators for creating suitable real-time test signals at reduced sample rates. We further explain how to correctly adapt AWGN signal generation and fading simulation for “slow I/Q”.

English - 2012/12/10

This application note explains how to play back multiple test signals fast and flexibly using an ARB generator from Rohde & Schwarz. Waveform sequencing enables high-speed operation for production testing.

English - 2012/02/29

Additional Tests on CDMA2000^® Mobile Stations in Accordance with Standard TIA-98

English - 2012/01/05

HSDPA - Challenges for UE Power Amplifier Design

English - 2011/07/11

Pulse Train Master for the R&S Signal Generators

English - 2011/05/10

LTE Bitstream Verification

English - 2011/02/02

Importing Data in ARB, Custom Digital Modulation and RF List Mode

English - 2010/12/21

Measurement of phase-, timing- and gain offset between 2 signals using multiple spectrum analyzers

English - 2010/09/28

Describe how to configure a signal generator from Rohde & Schwarz to generate test signals for basic tests on Dual Cell HSDPA (DC-HSDPA) operation.

English - 2010/08/28

Measurements on RFID Components According to ISO/IEC 14443 Standard

English - 2010/01/25

CDMA2000^® Base Station Tests With the R&S^®SMU200A Vector Signal Generator and Rohde & Schwarz Spectrum Analyzers

English - 2009/09/15

How to Run WCDMA BER/ BLER Tests Using R&S Vector Signal Generators

English - 2009/03/06

Measurements on 3GPP WCDMA User Equipment According to Standard TS 34.121

English - 2008/12/10