USB protocols

Trigger & decode oscilloscope software package

USB protocols
ライトボックスを開く
USB protocols
ライトボックスを開く
USB protocols, Software USB protocols, Screenshot

主な特長

  • Supports multiple USB protocols, including USB1.1/ 2.0 /3.2 Gen1 & 2/ HSIC & SSIC/ Power Delivery
  • Bus configuration in seconds due to the Auto detection of the data rate and threshold
  • Display of decoded protocol as color-coded honeycomb in the waveform diagram or in tabular format
  • Reliable triggering on protocol details such as frame start, frame content and errors
  • Powerful search and navigate capabilities
  • Multi-domain icon

Brief description

The R&S®RTO and R&S®RTP oscilloscopes support triggering and decoding of all USB1.1 / 2.0/ 3.2 Gen 1/2, HSIC/SSIC and Power Delivery (PD) signals. You can set up the decoding within seconds. For detailed analysis, results can be viewed as color-coded protocol components and/or in table format. Errors are identified reliably and efficently using the hardware-accelerated trigger. You can trigger on protocol details such as frame start, frame content and errors.

特長と利点

Fast configuration

Bus setup in seconds starting from the app cockpit
 

Starting from the oscilloscope's app cockpit, it only takes a few steps to configure the respective USB protocol. Once the protocol for decoding has been chosen, the connected channels selected and the correct levels set, decoding begins automatically.

ライトボックスを開く

Easy and fast setup for decoding USB 3.2 Gen2

Color-coded protocol display

Protocol display as color-coded bus signals and in decode table
 

You can analyze the decoded protocol frames versus the original wavefrom by overlaying the waveform signal with color-coded protocol data. Address and data content can be displayed in hex, bin or ASCII format. Arrange the best overview on the display with the R&S SmartGrid. The protocol can also be displayed in a concise table.

ライトボックスを開く

Decoded USB 3.2 Gen1 protocol frames are color coded for easier grasping of details.

Strong trigger capability

Strong trigger capability on start, stop, address, data and various error conditions

The protocol-specific trigger let you reliably isolate protocol events and errors. Thanks to high acquisition rates, Rohde & Schwarz oscilloscopes are ideal for finding errors quickly. The hardware-based triggering is available on specific protocol content, e.g. addresses, data and protocol errors.

ライトボックスを開く

Select from various USB-PD protocol packet types for triggering.

Powerful search and navigate 

Search and navigate on recorded acquisitions

Comprehensive search functions simplify the analysis of long signal sequences. You can search for waveforms based on different criteria, such as signal faults or protocol content. All detected events are shown in a table with timestamps. The individual events can be examined in a zoom window with simple navigation between events.

ライトボックスを開く

Powerful searching, even in long recordings. Example of a USB 3.2 Gen 2 signal.
 

利用可能なモデル

利用可能なモデル
モデル
Serial standard
Search
Base unit

R&S®RTP-K570

注文番号 1803.6690.02

Serial standard
USB 1.1/ 2.0/ 3.2 Gen1 & Gen2 / HSIC / SSIC / PD
Search
Base unit

R&S®RTO6-K570

注文番号 1801.7077.02

Serial standard
USB 1.1/ 2.0/ 3.2 Gen1 / HSIC / SSIC / PD
Search
Base unit

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

マーケティング・パーミッション

お問い合わせ内容が送信されました。 後ほどご連絡致します。
An error is occurred, please try it again later.
一般および法的情報

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」に関する利用条件

1. 抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」(以降、「抽選」と呼びます)は、Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0(以降、「R&S」と呼びます)によって主催されます。

2. すべての参加者は、2020年1月1日から2020年12月31日までの期間中に、参加者の氏名、会社名、ビジネス用メールアドレスを入力することで抽選への参加登録を行えます。

3. 参加は無料です。商品またはサービスの購入経験の有無は問いません。

4. 抽選は法人のみを対象としており、賞品獲得者は法人に限られます。個人の場合、自分の名前と自分のアカウントによる参加は認められませんが、法人の名前で、その法人の代理として参加フォームを提出することにより、法人の代表として参加することが可能です。

5. 賞品として、2020年1月1日から2020年12月31日までの期間内に、R&S®RTB2000 10台のうちの1台を獲得できます。

賞品:R&S®RTB2000 デジタル・オシロスコープ

6. 抽選は、ローデ・シュワルツ本社、Muehldorstrasse 15, 81671 Munichで行われます。賞品獲得者には、5営業日以内にメールでお知らせいたします。

7. 法人の正式な代表者が、賞品受け取りの意向をローデ・シュワルツに通知するものとします。受け取り辞退が発生した場合、または2週間以内に返事がない場合は、新たな賞品獲得者が抽選によって選ばれます。4週間以内に賞品獲得者を決定できない場合、抽選は終了し、賞品は没収となります。

8. R&Sの従業員とその家族、および抽選処理の関係者とその家族は、参加フォームへの記入対象から除外されます。

9. 賞品の現金同等物または交換は許可されていません。賞品は譲渡できません。参加者の国で課されるすべての税金、徴収金、関税、手数料、およびその他の料金は、参加者が負担するものとします。

10. 個人データは、本抽選キャンペーンの目的でのみ処理され、別段の合意がない限り、抽選から4週間後に削除されます。

11. これらの利用条件に従わない参加者は、R&Sにより本コンペティションへの参加資格を剥奪される場合があります。その場合、賞品を遡って撤回することもできます。これらの利用条件に違反したために賞品が遡及的に取り下げられた場合、賞品はそれぞれの参加者の負担で「1.」に記載されているR&Sの住所に返送されるものとし、抽選で新たな賞品獲得者が選ばれることになります。

12. 参加者は本抽選の賞品を請求することはできず、この点に関して法的手段を講じることは許可されません。

13. 抽選およびR&Sとそれぞれの参加者との間に発生するいかなる契約上の関係も、法の抵触に頼ることなく、ドイツ法に準拠し、同法に従って解釈されるものとします。本競争への参加により直接的または間接的に生じた紛争については、ドイツのミュンヘンの裁判所が専属管轄権を有するものとします。

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.