R&S®CMX500 5G One-Box Signaling Tester

R&S®CMX500 5G One-Box Signaling Tester
라이트박스 열기
R&S®CMX500 5G One-Box Signaling Tester
라이트박스 열기
R&S®CMX500 5G One-Box Signaling Tester
라이트박스 열기
R&S®CMX500 5G One-Box Signaling Tester
라이트박스 열기
R&S®CMX500 5G One-Box Signaling Tester
라이트박스 열기
R&S®CMX500 5G One-Box Signaling Tester
라이트박스 열기
R&S®CMX500 5G One-Box Signaling Tester, Front LowR&S®CMX500 5G One-Box Signaling Tester, Back lowR&S®CMX500 5G One-Box Signaling Tester, Hero viewR&S®CMX500 5G One-Box Signaling Tester, Side viewR&S®CMX500 5G One-Box Signaling Tester, Side viewR&S®CMX500 5G One-Box Signaling Tester, Application Image

주요 사항

  • LTE, 5G FR1 frequency range up to 8 GHz and FR2 milimeter-wave frequency range up to 50 GHz in one instrument
  • Support of 5G stand-alone mode / non-stand-alone mode
  • Capable of large variety of present and future LTE and 5G 3GPP band combinations
  • Future proof modular and scalable HW-architecture
  • Web-based CMsquares user interface for RF-, functional-, application- and protocol test

The next generation of mobile radio testing

The R&S®CMX500 radio communication tester is the future-proof solution for 5G NR testing, featuring an intuitive and flexible web-based user interface, the R&S®CMsquares. Supporting manual interactive operation as well as automatically sequence-controlled test protocols makes the R&S®CMsquares an advantageous software solution, with unique modules for all signaling use cases. These range from R&D design stages up to end-to-end application testing, production and conformance tests. The introduction of a one-platform strategy for all 5G NR test equipment enables a unified test environment for signaling and non-signaling testing through all stages of 5G device production.

기능 및 장점

RF Parametric testing (TX & RX)

Complete RF characterization of a device using the R&S®CMX500 radio communication tester

High-performance data transmission via the air interface is only possible with devices that have perfect transmit and receive characteristics. For the 5G FR1 and FR2 frequency ranges, this requires performing key RF transmitter measurements such as modulation, quality, transmit power and spectral parameters can, as well as receiver measurements such as block error rate (BLER). 3GPP specifies extensive test cases for transmitter (TX) and receiver (RX) measurements in TS38.521 sections 6 and 7. These are included ready-made in the sequencer and can be run there. The R&S®CMX500, with its callbox functionality, offers intuitive solutions for features such as

  • Flexible RF testing for development with R&S®CMsquares
  • Fully automated conformance testing with R&S®CONTEST
  • 3GPP test cases for SA and NSA modes
  • 3GPP MIMO RX/TX measurements
  • Receiver performance measurements under fading conditions
  • Combined LTE – 5G carrier aggregation measurements
  • Easy transfer into production via identical SCPI commands for the R&S®CMX and the R&S®CMP200 radio communication tester

Data Throughput

Fast and easy application testing

For active measurements of the maximum achievable throughput in 5G, the iPerf tool generates traffic that allows you to monitor the data rate along the different layers. Additionally, the integrated FTP server enables upload and download throughput tests for the File Transfer Protocol. The achievable data rate of a mobile device is a basic but important feature and is determined by the capacity of the interfaces involved. The R&S®CMX500 features powerful IP analysis and protocol statistic measurement functions, enabling effective monitoring of the internet communication channels used by applications.

Protocol testing

Full signaling protocol test for R&D and conformance  

The R&S®CMX500 brings you a full set of tools for signaling testing throughout the complete development lifecycle of mobile devices. It provides developers of wireless devices with radio access simulation functionalities and is therefore the perfect test instrument for signaling test solutions according to 3GPP standards.

Audio and video testing

Ensuring highest performance to achieve best user experience

The R&S®CMX500 radio communication tester also supports 5G audio and video testing applications. Featuring the unified R&S®CMsquares test software, the solution provides all necessary technologies to enable VoLTE and VoNR audio measurements in SA and NSA modes, as well as ViLTE and ViNR video measurements. With the integrated IMS Server (IP Multimedia Subsystem), it is possible to perform internal loopback as well as audio quality testing with an external audio analyzer in IP Forward mode.

5G end-to-end application testing

Simplify your test setup with a integrated solution for application testing  

The highest layers of 5G architecture are the application and IP layers, which use internet protocol for functionality and essential KPIs. The verification of these layers is called the (e2e) application test. The R&S®CMX500 features application testing with features such as

  • High performance
  • Integrated Web, FTP, DNS and IMS servers
  • Ping latency and throughput measurement functions
  • Packet capture
  • IPv4 and IPv6 connectivity
  • Guaranteed repeatable and comparable test results

R&S®CM360° Field-to-Lab for 5G

Import mobile network configurations recorded in the field into the lab

R&S® CM360° Field-to-Lab for 5G, empowers its user to import mobile network configurations recorded in field trials or drive tests into the lab environment. This virtual drive testing solution effortlessly allows the user to analyze field logs, drill down on problem areas and recreate field environments in the lab, thereby minimizing the time and enhancing the ability to reproduce issues on R&S®CMX500.

CMsquares - controlling 5G testers
R&S®CMsquares – 측정을 수행하는 가장 강력하고 직관적인 방법

R&S®CMsquares – 측정을 수행하는 가장 강력하고 직관적인 방법

5G 측정의 모든 필요를 만족하는 R&S®CMX500 – 직관적인 웹 기반 사용자 인터페이스

5G NR 테스트에 필요한 모든 것을 갖춘 R&S®CMsquares는 웹 기반 사용자 경험을 제공하는 통합형 테스트 소프트웨어 솔루션입니다. 테스트 구성, 파라미터화, 측정뿐만 아니라 단일 환경에서 실행되는 테스트에 이르기까지, 대시보드를 통해 다양한 유형의 애플리케이션에 신속하게 액세스하므로 표준 GUI에서 모든 새로운 5G 무선 통신 테스터를 제어하고 통합된 경험을 기대할 수 있습니다.

CMX500 application
R&S®CMX500 솔루션을 통한 End-to-End 애플리케이션 테스트 최적화

R&S®CMX500 솔루션을 통한 End-to-End 애플리케이션 테스트 최적화

IP v4 및 v6를 지원하는 통합 애플리케이션 서비스를 확인해보십시오.

R&S®CMX500 솔루션이라면 외부 기기들을 복잡하게 연결해야만 했던 End-to-End 측정을 혁신적으로 간단하게 만들 수 있습니다. CMX500은 애플리케이션 테스트를 지원하는 로데슈바르즈 고유의 측정 솔루션으로, 시험을 위해 필요한 모든 데이터 서버 및 시험 툴을 하나로 묶은 일원화된 통합 테스트 솔루션입니다. R&S®CMsquares 소프트웨어의 GUI를 통해 모든 테스트 및 계측을 각각 시행할 수 있으며, 통합 시퀀서 도구에서 테스트 시퀀스를 구축하거나 XLAPI 및 SCPI 인터페이스를 통해 원격으로 제어할 수 있습니다.

동영상을 통해 테스트 셋업을 단순화하고 최고의 재현성과 안정성을 확보하는 방법을 확인해보십시오.

관련 동영상

5G NR Carrier 적합성 시험

6월 21, 2021


6월 16, 2021

5G NR에서 음성 서비스 테스트 - (VoNR)

6월 16, 2021

5G 장치 테스트 - 10Gbps에 이르는 IP 데이터 처리량 테스트에 대비하십시오

6월 16, 2021

R&S®CMX500 솔루션을 통한 End-to-End 애플리케이션 테스트 최적화

2월 19, 2021

Aircom International, 로데슈바르즈의 도움으로 5G NR & LTE 기기 테스트 역량 확대

5월 06, 2020

동적 스펙트럼 공유(Dynamic Spectrum Sharing)를 통한 5G NSA 신호 테스트

3월 05, 2020

2Gbps의 5G NR IP 데이터 최대 전송량 테스트

3월 05, 2020

정보 요청

질문이 있거나 추가 정보가 필요하십니까? 이 양식에 맞춰 내용을 입력해 주시면 회신 드리겠습니다.

로데슈바르즈에서 다음과 같은 방법으로 정보를 수신하겠습니다

마케팅 동의

이것이 의미하는 바는 무엇입니까?

Rohde & Schwarz GmbH & Co. KG 및 본 웹사이트에서 명기하는 Rohde & Schwarz 법인 혹은 지사에서
테스트 및 계측, 보안 통신, 모니터링 및 네트워크 테스트, 방송 및 미디어, 사이버 보안 분야의 제품, 솔루션과 관련된 마케팅 및 광고 목적(예: 특별 행사 및 할인 프로모션에 대한 정보)을 위해 선택한 채널(이메일 또는 우편)을 통해 연락하는 데 동의합니다.

이용자의 권리

이 동의 선언은 news@rohde-schwarz.com에 "Unsubscribe"라는 제목으로 이메일을 보내 언제든지 취소할 수 있습니다. 또한 전송되는 각 이메일에 향후 이메일 광고에 대한 구독 취소 링크가 포함되어 있습니다. 개인 데이터 사용 및 해지 절차에 대한 자세한 내용은 "개인정보 보호정책"에 명시되어 있습니다.

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.