Rohde & Schwarz offers a wide range of instruments and systems such as wireless device testers, infrastructure testers, protocol testers, conformance and preconformance testers.

Overview Key FactsThe optional RX/TX Interface (R&S®GS2110) can be used for the following three applications: Key FactsThe optional RX/TX Interface (R&S®GS2110) can be used for the following three applications:DSC-NMEA interface for transceiver controlControl interface for a detached receiver (R&S®EK895)Control interface for a detached transceiver (R&S®XK2000)For naval applications in line with GMDSS

Overview Key FactsThis interface is used for system applications where an internal modem (R&S®GM2200) is operated with an external system processor, e.g. PC with RSX.25 data protection. Key FactsThis interface is used for system applications where an internal modem (R&S®GM2200) is operated with an external system processor, e.g. PC with RSX.25 data protection.Features CollapsedPlug-in interface to

Overview Key FactsThe R&S®GV2000 is a programmable interface card which is usually integrated into the external option/peripheral device. Key FactsThe R&S®GV2000 is a programmable interface card which is usually integrated into the external option/peripheral device. Its outputs are application-specific interfaces that allow the connected option to be controlled from the R&S®XK2000. A typical output

Overview Key FactsFor the use of the Transceiver R&S®XK2100 in continuous transmit mode, the Blower Unit R&S®KL2100 is recommended ... Key FactsFor the use of the Transceiver R&S®XK2100 in continuous transmit mode, the Blower Unit R&S®KL2100 is recommended for keeping the operating temperature and the quality parameters within specified tolerances even under harsh environmental conditions.This option

Overview Key FactsAn optional RF protection for the input of the 500 W and 1000 W R&S®Series2000 transceivers is available. The R&S®ZW2900 addon module ensures destructive-free reception in the case of RF interference at the antenna (caused by very close transmitters) of up to 100 V rms corresponding to a power of 200 W into 50 Ω. Key FactsAn optional RF protection for the input of the 500 W and 1000

Overview Key FactsAs of September 2007, all R&S®ZVA/R&S®ZVB/R&S®ZVT analyzers are equipped with an FMR7/3 internal PC control unit (previous version: FMR6/5). Key FactsAs of September 2007, all R&S®ZVA/R&S®ZVB/R&S®ZVT analyzers are equipped with an FMR7/3 internal PC control unit (previous version: FMR6/5). The more powerful FMR7/6 version can be ordered as an option to be fitted ex factory, or retrofitted

Overview Key Facts DTMF (dual tone multiple frequency) code radio control (incl. AF) according to ITU-T recommendation Q 23 for Control Units R&S GB406C3/H3/S3 V.11 (X.27)/RS-422-A (R&S Series400 F-type) radio control: for Control Units R&S GB404 or R&S GB408 PTT by 2040 Hz tone via AF line (with tone-operated switch and filters) MAIN/STANDBY switching Customer-specific I/O ports, controlled from a

Overview Key Facts Connection of additional antennas, e.g. in EPM (ECCM) radio systems Addition to TX/RX switch (in U3 type transceivers, model .13, this combination is included as standard)Note: There is also R&S GI418U model .12 which is used as standard alternatively to the TX/RX switch in transceiver models .13 and .28 etc Key FactsConnection of additional antennas, e.g. in EPM (ECCM) radio systemsAddition

Overview Key Facts AF line connection TX and RX AF/telephone line protection With 1.5 kV isolated 600 Ω transformers to protect the radio/operator according to EN4103/BZT guideline With lightning fine protection PTT via phantom circuit Transmitting with 8.33 kHz channel spacing (118…136,975 MHz) With TX AF filter with 4 switchable upper stop frequencies 2.5/2.7/2.9/3.15 kHz (3.4 kHz in addition as

This is a discontinued product Please note the following successor product(s):R&S®DDF200M Digital Direction FinderOverview OptionsKey Facts Direction finding of signals with almost any modulation Wide-aperture behaviour above 150 MHz with DF antenna R&S® ADD090 Key FactsDirection finding of signals with almost any modulationWide-aperture behaviour above 150 MHz with DF antennaR&S®ADD090Excellent DF

Overview OptionsKey Facts Critical test environments involving pulsed current drain, e.g. GSM mobiles Emulation of various battery types and charging states Current-/voltage transient analysis Key FactsPower-saving transmission technologies have been, and will continue to be, the key to expanding the capabilities of mobile radio. This is particularly true of transmission technologies that make use

Overview Key Facts Dimensions: 23 x 12 x 9 cm Weight: 300 g; total with Q8230 and accessories 1,2 kg Key FactsDimensions: 23 x 12 x 9 cmWeight: 300 g; total with Q8230 and accessories 1,2 kg

Overview Key factsThe HF Dipole R&S®HX002H2 is suitable for setting up radio links over any distance. In particular, the optimized omnidirectional coverage ensures high transmission reliability over short and medium distances. Key factsThe HF Dipole R&S®HX002H2 is suitable for setting up radio links over any distance. In particular, the optimized omnidirectional coverage ensures high transmission reliability

Overview ModelsOptionsKey facts Multiport measurements, avoiding any time loss due to matrix control True differential measurements and coherent signal generation Key factsMultiport measurements, avoiding any time loss due to matrix controlFlexible configuration of test ports for balanced and single-ended measurementsTrue differential measurements and coherent signal generationEnhanced performance

Overview Key facts EMI bandwidths for commercial and military standards Standard EMI detectors: quasi-peak, CISPR‑average, RMS-average Linking of measurement markers to various EMI detectors Key factsEMI bandwidths for commercial and military standardsStandard EMI detectors: quasi-peak, CISPR‑average, RMS-averageLinking of measurement markers to various EMI detectorsLimit lines and transducers for

Overview ModelsOptionsKey facts Frequency range 9 kHz to 30 MHz Power-handling capacity up to 16 A, constant current (country-specific) Simulated impedance (50 μH + 5 Ω) || 50 Ω in line with CISPR 16-1-2 Amd. 2:2006Key factsFrequency range 9 kHz to 30 MHzPower-handling capacity up to 16 A, constant current (country-specific)Simulated impedance (50 μH + 5 Ω) || 50 Ω in line with CISPR 16-1-2 Amd. 2:

Overview Key Facts Simulates up to four users in the downlink and up to four terminals in the uplink Physical layer subtypes 0&1 or 2 selectable Downlink data rate selectable through rate index and packet size Key FactsThe R&S® AMU-K47 option generates signals for 1xEV-DO (Rev. A) in line with 3GPP2 C.S0024-A 3.0.Simulates up to four users in the downlink and up to four terminals in the uplinkPhysical

Overview Key FactsThis interface plug-in module is used to connect an external HF data modem to the transceivers of the R&S®XK2000 family. Key FactsThis interface plug-in module is used to connect an external HF data modem to the transceivers of the R&S® XK2000 family. It performs AF level matching for different types of modems, configuration of the PTT line (V.28/TTL) and provides a serial control

This is a discontinued product Please note the following successor product(s):R&S®OSP Open Switch and Control Platform Overview ModelsOptionsFeatures & BenefitsKey facts Compact size requiring little space Optimal configuration by selecting the appropriate switch and control modules Plug & play makes complex installation superfluousKey factsCompact size requiring little spaceOptimal configuration by

The R&S®HMC8015 power analyzer is a compact tester for AC/DC load and standby current characterization that enables measurements without a computer or remote infrastructure.

The R&S®HM7042-5 triple power supply is the perfect choice for test ranging from education, research & design, maintenance & repair to manufacturing tests.

Benchmarker II Go achieves accurate, stable, and reproducible test results  in an easily transportable and lightweight format for ad hoc measurement campaigns.

R&S ® PKU100 solid-state power amplifier for Ku band uplink applications offers unmatched performance and efficiency in a compact form factor.

Outstanding quality and innovation at a budget friendly price. The R&S ® FPC spectrum analyzer provides unexpected performance, engineered in Germany.

This is a discontinued product Please note the following successor product(s):R&S®NRPxxT/TN/TWG Thermal Power SensorsOverview OptionsFeatures & BenefitsKey facts Measurement range: –35 dBm to +20 dBm Frequency range: DC to 33 GHz 3.5 mm connector Operation with R&S® NRP2 base unit or via USB on a Laptop/PC Key factsMeasurement range: –35 dBm to +20 dBmFrequency range: DC to 33 GHz3.5 mm connectorOperation

Overview Signal field content is used for automatic setting of modulation and can be displayed for further evaluation.Key facts Analysis at the RF or in the analog/digital baseband (optional) Demodulation bandwidth of 40 MHz Modulation formats for IEEE 802.11a/g/j/n: BPSK, QPSK, 16QAM, 64QAM Key factsAnalysis at the RF or in the analog/digital baseband (optional)Demodulation bandwidth of 40 MHzModulation

Overview Key Facts Supports OFDM and OFDMA Provides complex WiMAX™ measurements at a keystroke Performs measurements in the RF/IF range and in the baseband Key FactsExpands the R&S®FSV analyzer by adding the capability to perform spectrum and modulation measurements on signals in line with the IEEE 802.16‑2004 and IEEE 802.16e-2005 standardsSupports OFDM and OFDMAProvides complex WiMAX™ measurements

Overview OptionsFeatures & BenefitsKey facts Digital standards like WCDMA, LTE, HSPA, WLAN802.11a/b/g/n/ac, MB-OFDM UWB ... using WinIQSIM2™ Almost all R&S®AFQ100A features includedKey factsMemory clock rate:RF bandwidth in standard modeRF bandwidth in broadband modeLong signal duration of up to 1 Gsample (option)R&S®WinIQSIM2™ option for flexible UWB (ECMA-368) signal generation (R&S®AFQ-K264)Almost

Overview Features & BenefitsKey FactsThe R&S®AFQ100B is the right choice for developing and testing UWB components and receivers in the baseband. Its system bandwidth of 528 MHz fits for one WiMedia band which can comfortably be generated with the R&S®WinIQSIM2™ option R&S®AFQ-K264 Key FactsUltra-wideband is a radio technology that can be used at very low energy levels for short-range high-bandwidth