Automotive radar compliance testing

Automotive radar compliance testing

Ensure the correct operation of automotive radar sensors in safety-critical applications

Automotive radar sensors are used in complex and safety-critical applications such as advanced driver-assistance systems (ADAS) and autonomous driving (AD). Their correct function and compliance with relevant regulations, both under nominal and adverse conditions, must be verified. There are also liability considerations for original equipment manufacturers (OEMs) and radar-module suppliers, so robust test and measurement procedures and trusted testing instruments are required to minimize risk and ensure an efficient approval and certification process.

Rohde & Schwarz is engaged globally with manufacturers and standardization bodies in order to proactively develop leading-edge solutions for automotive radar compliance testing that all OEMs, Tier 1 suppliers and relevant test houses can rely on.

Your challenges

  • Reliable in-band transmission automotive radar compliance testing against global radar regulations in the range from 76 GHz to 81 GHz
  • Unwanted out-of-band/spurious radar emissions testing up to the 3rd harmonic at 231 GHz
  • Electromagnetic susceptibility (EMS) testing of radar module operation in a full-vehicle, over-the-air (OTA) environment
  • Proving radar interference robustness in the presence of other radar modules

Features of our radar compliance testing solutions

High precision in-band measurement
Complete in-band test solution that simplifies the complex process of radar compliance testing and ensures accurate and reliable results based on the best-in-class spectrum analyzer, target simulator, vector signal generator and compact antenna test range (CATR) chamber
Open Lightbox
High sensitivity OOB and spurious measurement up to 200 GHz
Reliable out-of-band and spurious emissions measurements for automotive radar using proven mixer technology with better than -40 dBm EIRP sensitivity
Open Lightbox
Simulation of advanced interference scenarios
Generation of realistic high output power interference scenarios using the versatile vector signal generator R&S®SMW200A together with the R&S®Pulse Sequencer software in combination with the target simulation by the automotive radar echo generator R&S®AREG800A
Open Lightbox
High precision target simulation using the R&S®AREG100A automotive radar echo generator proven to work in demanding EMC environments
High precision target simulation using the R&S®AREG100A automotive radar echo generator proven to work in demanding EMC environments
Open Lightbox

Benefits of our solutions

  • Integrated solutions accelerate the compliance process and provide faster time to market for automotive radar sensors
  • Superior measurement precision allows lower performance margins in your radar sensor specification and ensures best value for your customer
  • Comprehensive interference simulation enables radar module design resilient to interference for reduced risk and liability exposure

Our partners and experts

Daniel Lenhardt, CEO IB-Lenhardt AG and IBL-Lab GmbH

Daniel Lenhardt, CEO IB-Lenhardt AG and IBL-Lab GmbH

"With high-tech measurement systems from Rohde & Schwarz, IB-Lenhardt AG found the ideal supplier to offer leading edge measurement services and solutions. Thereby, we could upgrade our radar lab to become one of the best in the world."

Find more information about IB-Lenhardt on
www.ib-lenhardt.de

Alois Ascher

Dr. Alois Ascher, Product manager for signal generators (aerospace and defense, automotive, components) at Rohde & Schwarz

"The failure rate rises sharply with the increasing number of radar sensors needed for modern ADAS functions due to the their possible mutual interference. Rohde & Schwarz provides the reference solution for testing radar-based ADAS in the lab against various radar interfering signals, to verify the proper functionality of these safety-critical systems, even in the most demanding RF environments."

Application notes and cards for automotive radar compliance testing

Radar interference testing

App card: Radar interference testing

Innovative and simple solution for testing automotive radar sensors against interferers.

More information

Norm interferers in Radar

App card: Norm interferers in radar

Testing automotive radars against norm interferers.

More information

ADAS radar sensor interference testing

App note: Automotive Radar Sensors - RF Signal Analysis and Inference Tests, 1MA276

ADAS radar sensors: transmit signal analysis and interference test.

More information

App note: Automotive radar sensors - RF signal analysis and interference tests

App note: Automotive radar sensors - RF signal analysis and interference tests

This application note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages. It also shows a setup to verify the functionality of a radar in case of radio interference.

More information

Related resources for automotive radar compliance testing

CES High-Precision In-Band Radar Test Solution

High-Precision In-Band Radar Test Solution

Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022.

More information

Why test & certification experts IB-Lenhardt trust Rohde & Schwarz radar measurement solutions

Why test & certification experts IB-Lenhardt trust Rohde & Schwarz radar measurement solutions

Automotive radar sensors must be verified to be compliant with the relevant regulations. Find out how IB-Lenhardt conduct this important service with the help of Rohde & Schwarz.

More information

Trailer: ATS1500C

Introduction video: ATS1500C automotive radar test chamber

Overview of the features and benefits of the ATS1500C

More information

Webinar: Vallidation of radar-based autonomous driving functions

Webinar: Validation of radar-based autonomous driving functions

In this webinar you will learn about validation of radar-based autonomous driving functions under electromagnetic influences.

More information

White paper: Automated ADAS test system trial with radar sensors and electromagnetic interference

White paper: Automated ADAS test system trial with radar sensors & EMI

This white paper is describing a test procedure to replicate real life scenarios where the ADAS radar functions are activated during EMS testing.

More information

Poster: Automotive radar

Poster: Automotive radar

Get an overview about test and measurement solutions for automotive radar applications. Register now and get your free poster.

More information

Webinar: Characterizing an ADAS Radar in a transportable CATR based fully anechoic chamber with best-in-class performance

Calibration of imaging radar using a CATR chamber

Learn about ADAS radar technology trends and measurement needs and get introduced our CATR test setup

More information

Featured products

R&S®ATS1500C antenna test chamber for automotive radar

R&S®ATS1500C antenna test chamber for automotive radar

Key facts

  • In-band OTA measurements on 77/79 GHz automotive radar sensors
  • CATR with bidirectional parabolic reflector on a 1.3 m2 footprint
  • Capable of testing radar modules with aperture size up to 30 cm
  • High speed, high precision 3D tilt-tilt positioner
  • Ultra low reflectivity and exceptional shielding effectiveness

Product information

R&S®AREG800A automotive radar echo generator

R&S®AREG800A automotive radar echo generator

Key facts

  • Generation of multiple objects with individual distance, size, radial velocity and direction even for very close objects
  • Up to 4 GHz instantaneous RF bandwidth
  • Open interface for replay of scenarios
  • Synchronization of multiple R&S®AREG800As and R&S®QAT100s

Product information

R&S®FSW signal and spectrum analyzer

R&S®FSW signal and spectrum analyzer

Key facts

  • Unparalleled low phase noise and best sensitivity on the market
  • 8.3 GHz internal analysis bandwidth
  • 800 MHz real-time analysis bandwidth
  • SCPI recorder simplifies code generation
  • New flat Windows 10 design and multitouch gesture support

Product information

R&S®SMW200A vector signal generator

R&S®SMW200A vector signal generator

Key facts

  • Dual path instrument up to 44 GHz
  • 2 GHz modulation bandwidth
  • Integrated fading with up to 800 MHz bandwidth and up to 8x8 MIMO
  • Signal generation for all major digital communications standards
  • Advanced GNSS and radar simulator

Product information

R&S®AREG100A Automotive radar echo generator

R&S®AREG100A Automotive radar echo generator

Key facts

  • Supports 24 GHz, 77 GHz and 79 GHz automotive radar sensors
  • Future proof with instantaneous bandwidths of up to 4 GHz
  • 4 m minimum artificial object distance for short range radar testing
  • Up to 4 artificial objects in fixed distances at the same time
  • Controllable radial velocity for each artificial object individually or for all artificial objects together

Product information

R&S®RTP oscilloscope

R&S®RTP oscilloscope

Key facts

  • Bandwidth: 4 GHz to 16 GHz
  • Max. sample rate: 40 Gsample/s
  • Max. memory depth: 2 Gsample
  • Realtime deembedding
  • All trigger events at full bandwidth
  • Up to 16 bit resolution

Product information

Related topics

Automotive electromagnetic compatibility (EMC) and full-vehicle antenna testing

Automotive electromagnetic compatibility (EMC) and full-vehicle antenna testing

More information

Automotive radar - seeing with radio waves

Automotive radar - seeing with radio waves

More information

Automotive radar signal analysis and generation

Automotive radar signal analysis and generation

More information

Sign up for our newsletter

Sign up for our newsletter

Stay up to date on upcoming trends and latest applications.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.