Key Facts
- Frequency range: up to 26.5 GHz
- Easy to configure
- Supports full crossbar measurements
- Easy setup with the R&S®ZNA; R&S®ZNB; R&S®ZNBT; R&S®ZND
- Remote control: LAN, USB, direct control interface, BNC trigger
Key Facts
R&S®ZN-Z8x switch matrices are designed and optimized for Rohde & Schwarz vector network analyzers. They offer a comprehensive, cost-effective total solutions for simple to complex measurement tasks on multiport or multiple devices. The switch matrices cover wide frequency ranges and provide configurable port count expansion options. Other features include full crossbar, hardware triggering, automatic test port assignment, easy adaptation, complementary R&S®ZN‑Z8X toolbox software and more. Several switch matrix accessories are also available for convenient and successful integration. Rohde & Schwarz switch matrices are robust and reliable, making sure you are well prepared for any measurements that your next task demands.
Quick Links
Cost-effective multiport extension
Rohde & Schwarz switch matrices are used in many applications. Typical applications include the design, validation and production of antenna arrays, data converter interfaces, RF components and more. R&S®ZN-Z8x switch matrices cover wide frequency ranges and come with a modular port expansion concept. Matrix models such as the R&S®ZN-Z86 and the R&S®ZN-Z86X support frequency ranges up to 26.5 GHz with optional extensions for 24 outputs. Cascading two R&S®ZN-Z84 or R&S®ZN-Z86 switch matrices increases the test port count to 48 ports. The switch matrices can even be used in combination with a true multiport VNA such as the R&S®ZNBT to dramatically increase the number of test ports and enable parallel testing.
Improves efficiency and performance
Users can select and adapt optimum configurations for low insertion loss, maximum accuracy and a high port counts with Rohde & Schwarz vector network analyzers and switch matrices.
Easy setup, easy configuration
R&S®ZN-Z8x switch matrices are designed and optimized for use with Rohde & Schwarz VNAs. The switch matrices are simple to setup and come nearly ready to measure out of the box.
Enables advanced automation
All R&S®ZN-Z86 and R&S®ZN-Z86X switch matrices come with hardware trigger capabilities. The key benefits of the trigger functions include:
Convenient, saves time and effort.
The R&S®ZN-Z8X Toolbox software helps users to getting-started, device monitoring, firmware updates and manual switching of defined routes of the connected switch matrix.
3 E's calibration with multiport calibration unit
The calibration concept focuses on the 3 E's – easy, efficient and error-free.
Order Number 1319.4969.22
Additional test ports 7 to 12, 2 VNA ports to 12 test ports
The R&S®ZN-Z84 base unit is a prerequisite.
Order Number 1319.4969.24
Additional test ports 7 to 12, 4 VNA ports to 12 test ports
The R&S®ZN-Z84 base unit is a prerequisite.
Order Number 1319.4969.32
Additional test ports 13 to 18, 2 VNA ports to 18 test ports
The R&S®ZN-Z84 base unit and R&S®ZN-Z84-B22 are prerequisites.
Order Number 1319.4969.34
Additional test ports 13 to 18, 4 VNA ports to 18 test ports
The R&S®ZN-Z84 base unit and R&S®ZN-Z84-B24 are prerequisites.
Order Number 1319.4969.42
Additional test ports 19 to 24, 2 VNA ports to 24 test ports
The R&S®ZN-Z84 base unit and the R&S®ZN-Z84-B32 are prerequisites.
Order Number 1319.4969.44
Additional test ports 19 to 24, 4 VNA ports to 24 test ports
The R&S®ZN-Z84 base unit and the R&S®ZN-Z84-B34 are prerequisites.
Order Number 1326.4831.26
Additional test ports 7 to 12, 4 VNA ports to 12 ports
Order Number 1351.2900.22
Additional 7 to 12 test ports, 2 VNA ports to 12 test ports.
R&S®ZN-Z86 base unit is a prerequisite.
Order Number 1351.2900.24
Additional 7 to 12 test ports, 4 VNA ports to 12 test ports.
R&S®ZN-Z86 base unit is a prerequisite.
Order Number 1351.2900.32
Additional 13 to 18 test ports, 2 VNA ports to 18 test ports.
R&S®ZN-Z86 base unit and R&S®ZN-Z86-B22 are prerequisites.
Order Number 1351.2900.34
Additional 13 to 18 test ports, 4 VNA ports to 18 test ports.
R&S®ZN-Z86 base unit and R&S®ZN-Z86-B24 base are prerequisites.
Order Number 1351.2900.42
Additional 19 to 24 test ports, 2 VNA ports to 24 test ports.
The R&S®ZN-Z86 base unit and the R&S®ZN-Z86-B32 are prerequisites.
Order Number 1351.2900.44
Additional 19 to 24 test ports, 4 VNA ports to 24 test ports.
The R&S®ZN-Z86 base unit and the R&S®ZN-Z86-B34 are prerequisites.
Order Number 1351.2222.24
Extends 2 or 4 VNA ports to 12 test ports.
R&S®ZN-Z86X base unit is a prerequisite.
Order Number 1351.2222.44
Extends 2 or 4 VNA ports to 24 test ports.
R&S®ZN-Z86X base unit is a prerequisite.
Order Number 1175.3010.00
19" Rack Adapter
For mounting a 19" housing 2 RU high in a standard 19" rack
Order Number 1177.8803.00
19’’ rack adapter for devices with 2 height units
Order Number 1177.8810.00
19" rack adapter for 3 HU model
Order Number 1351.3906.02
Base unit extension box, 2 HU
For R&S®ZN-Z84/5/6 switch matrix, benchtop operation
Order Number 1351.3906.03
Base unit extension box, 3 HU
For R&S®ZN-Z86X switch matrix, benchtop operation
Order Number 1323.9290.00
Direct control cable
Order Number 1326.6605.02
Semi-rigid cables N (m) - 3.5 mm (m)
Connects two 2-to-24 port R&S®ZN-Z84 units to a four-port R&S®ZNB4/8
Order Number 1328.8905.02
Semi-rigid cables 2.92 mm (f) -2.92 mm (m)
RF cable set for interconnection between the R&S®ZNA26/43 and R&S®ZN-Z86, benchtop operation.
Order Number 1328.8905.03
Semi-rigid cables 2.92 mm (f) -2.92 mm (m)
RF cable set for interconnection between the R&S®ZNA26/43 and the R&S®ZN-Z86X, benchtop operation.
Order Number 1328.8911.02
Semi-rigid cables 2.92 mm (f) -2.92 mm (m)
RF cable set for interconnection between the R&S®ZNB26/43 and R&S®ZN-Z86, benchtop operation.
Order Number 1328.8911.03
Semi-rigid cables 2.92 mm (f) -2.92 mm (m)
RF cable set for interconnection between the R&S®ZNB26/43 and the R&S®ZN-Z86X, benchtop operation.
Order Number 1328.8911.05
Semi-rigid cables 2.92 mm (f) -2.92 mm (m)
Connects two units of 2-to-24 ports R&S®ZN-Z86 to a four-port R&S®ZNB26/43
Order Number 1328.8928.02
Semi-rigid cables 2.92 mm (f) -2.92 mm (m)
RF cable set for interconnection between the R&S®ZNBT26/40 and the R&S®ZN-Z86, benchtop operation.
Order Number 1328.8928.03
Semi-rigid cables 2.92 mm (f) -2.92 mm (m)
RF cable set for interconnection between the R&S®ZNBT26/40 and the R&S®ZN-Z86X, benchtop operation.
Order Number 1339.4006.02
Semi-rigid cables 2.92 mm (f) to 2.92 mm (m)
RF cable set for interconnection between the 2-port R&S®ZNA26/43 with a 6 or 12 port R&S®ZN-Z85 switch matrix, benchtop operation.
Order Number 1339.4006.03
Semi-rigid cables 1.85 mm (f) to 2.92 mm (m)
RF cable set for interconnection between the 2-port R&S®ZNA50/67 with a 6 or 12-port R&S®ZN-Z85 switch matrix, benchtop operation.
Order Number 1339.4006.04
Semi-rigid cables 2.92 mm (f) to 2.92 mm (m)
RF cable set for interconnection between a 4 port R&S®ZNA26/43 with a 6 port R&S®ZN-Z85 switch matrix, benchtop operation.
Order Number 1339.4006.05
Semi-rigid cables 1.85 mm (f) to 2.92 mm (m)
RF cable set for interconnection between a 4 port R&S®ZNA50/67 with a 6 port R&S®ZN-Z85 switch matrix, benchtop operation.
Order Number 1339.4006.06
Semi-rigid cables 2.92 mm (f) to 2.92 mm (m)
RF cable set for interconnection between 4 port R&S®ZNA26/43 with a 12 port R&S®ZN-Z85 switch matrix, benchtop operation.
Order Number 1339.4006.07
Semi-rigid cables 1.85 mm (f) to 2.92 mm (m)
RF cable set for interconnection between a 4 port R&S®ZNA50/67 with a 12 port R&S®ZN-Z85 switch matrix, benchtop operation.
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz
1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).
2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.
3. A participação é gratuita e não depende da compra de mercadorias ou serviços.
4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.
5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:
Prêmio: 1 osciloscópio digital R&S®RTB2000
6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.
7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.
8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.
9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.
10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.
11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.
12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.
13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.