R&S®AdVISE Visual Inspection Software

Cut out human lack of attention errors

R&S®AdVISE Visual Inspection Software
Abrir o Lightbox
R&S®AdVISE Visual Inspection Software, Screenshot

Key Facts

  • Automated EUT monitoring based on camera signal evaluation
  • Continuous monitoring of up to 32 regions on the EUT in parallel
  • Optional image tracking to compensate for EUT and camera vibrations
  • Creation of event-controlled video protocols and test reports
  • Optional automatic event detection based on machine learning

At a glance

R&S®AdVISE visual inspection software automates the process of visually monitoring equipment under test (EUT) during a test sequence using a video stream provided by cameras. It cuts out human lack of attention errors, ensures reproducible results and simplifies test documentation. A typical application is susceptibility testing of electronic products with R&S®ELEKTRA EMC test automation software.

Features & benefits

System concept

Flexible and economical

  • Runs on any Windows 10 controller that fulfills the minimum system requirements
  • Video grabbing via off-the-shelf portable frame grabber HW
  • Supports the use of a multiviewer to analyze in parallel the video of up to four cameras

Wide range of powerful test methods

Regions of interests

Regions of interest (ROI) are the mechanism by which the user defines how to use the R&S®AdVISE system. A wide range of analytical methods covers a broad spectrum of visual inspection:

  • Automatic event detection assistant (uses artificial intelligence)
  • Presence or absence of symbols and icons
  • Indicator brightness and colour
  • Analog indicator position
  • Flashing indicator
  • Motion detection
  • Disturbance of displays
  • Optical Character Recognition OCR (optional)
  • Audio monitoring (optional)

Automatic event detection assistant

Artificial intelligence inside for time-saving setup routines (optional)

The optional automatic event recognition assistant ROI eliminates the need to select and configure individual ROIs. Based on machine learning, using a short recording of the desired behavior of the EUT as training material, the ROI automatically detects and marks events in the video stream that may contain faulty behavior. The user, then, approves or discards the suggestions of the automatically detected events.

Image tracking

Optional R&S®ADV-K1062

Automate visual inspection, even if running motors, shaky turntable or unstable camera suspension causes image vibrations. Also simplifies camera repositioning

Video protocol and test report

Integrated protocol utilities

R&S®AdVISE creates a video protocol and an event list. What sets the system apart in usability is the indexing feature of the integrated video player. This feature allows the user to go to any event in the video just by clicking on the event information. The player also enables the user to collect a single frame as a JPEG image and to collect a clip of the video to be used for reports or archiving. The event list itself can be saved as a PDF test report.

Event controlled video protocol
Abrir o Lightbox

Event controlled video protocol

Show any event in the video by cklicking on the event information

Remote control

R&S®AdVISE uses a remote control interface to EMC test automation software

Generic remote control interface:

  • Open for any external control software
  • Passes summary Go/NoGo information to the control software
  • Control software can transmit test information to be inserted into the incoming and recorded video
Extended remote control interface:
  • Supported in R&S EMC control software R&S®ELEKTRA
  • Provides, in addition to the generic remote control interface, the test results of the individual ROIs for graphical processing in R&S®ELEKTRA

Measurement view overlaid EMS test conditions
Abrir o Lightbox

Measurement view overlaid EMS test conditions

Available options

Base unit
Product
Descrição
R&S®ADVISE-PC

Order Number 1434.6660.02

Descrição

License dongle

R&S®ADVISE-SW

Order Number 1434.6518.02

Descrição

Visual inspection software

Software options
Product
Descrição
R&S®ADV-K1032

Order Number 1434.6524.02

Descrição

Extension to 32 ROI

R&S®ADV-K1050

Order Number 1434.6530.02

Descrição

Virtual camera

R&S®ADV-K1060

Order Number 1434.6601.02

Descrição

ROI Optical caracter recognition for text and numbers

R&S®ADV-K1062

Order Number 1434.6618.02

Descrição

ROI Audio

R&S®ADV-K1070

Order Number 1434.6560.02

Descrição

Image Tracking

R&S®ADV-K1080

Order Number 1434.6576.02

Descrição

Automatic Detection Assistant ROI

Related videos

Software de inspeção visual R&S®AdVISE - O recurso de varredura

set. 15, 2020

Software de inspeção visual R&S®AdVISE - Monitoramento de objetos rotativos

set. 15, 2020

Software de inspeção visual R&S®AdVISE - Monitoramento de áudio

set. 15, 2020

Software de inspeção visual R&S®AdVISE - Monitoramento de indicadores analógicos

set. 15, 2020

Software de inspeção visual R&S®AdVISE - testes de susceptibilidade automatizados utilizando o R&S®AdVISE com o R&S®ELEKTRA

jul. 28, 2020

Software de inspeção visual R&S®AdVISE - Monitoramento dos indicadores dinâmicos de mudança de direção

jul. 28, 2020

Software de inspeção visual R&S®AdVISE- Em um olhar

jul. 10, 2020

Peça informações

Você tem alguma pergunta ou precisa de informação adicional? Simplesmente preencha este formulário e nós respondemos imediatamente.

Licença de marketing

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.
Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.