41 Résultats
Rohde & Schwarz – recognized as a reliable partner for Bluetooth® testing solutions: The R&S®CMW wideband radio communication tester platform supports Bluetooth® technology up to version 5. It covers the Bluetooth® Classic signaling function and all Bluetooth® LE transmitter and receiver tests as specified by Bluetooth SIG. The R&S®CMWrun sequencer software tool simplifies conformance testing by automatically executing all Bluetooth SIG test cases. Options for fast and comprehensive production testing of Bluetooth® enabled devices speed up the production process. The R&S®CMW supports Bluetooth® technology as well as other non-cellular standards and all major cellular standards in one box.
The R&S®CMW wideband radio communication tester offers universal, efficient test solutions for all modern cellular and non-cellular standards. The R&S®CMW is the world’s most widely used T&M platform for development, production and service. It meets all of the requirements for a state-of-theart wireless communication tester. The R&S®CMW can also emulate network operation under realistic conditions for protocol and RF tests.
Rohde & Schwarz – recognized as a reliable partner for WLAN testing solutions: As a leading supplier of T&M solutions for the wireless communications market, Rohde & Schwarz offers the R&S®CMW wideband radio communication tester, a universal, flexible platform for all major cellular and non‑cellular standards. The R&S®CMW measures the RF characteristics of transmitters and receivers on the air interface of wireless devices. It evaluates the applications and performance, and analyzes the protocol stack.
This brochure gives you an overview of our over-the-air (OTA) and antenna test solutions that, once in your lab, can help you push the boundaries of what’s possible.
R&S®Cellular V2X end-to-end application layer test solution - Fact Sheet Brochures et fiches techniques
The IP connection security analysis solution for the R&S®CMW500 platform identifies IP connection vulnerabilities in telematics units at an early stage of development.
The R&S®CMWrun sequencer software tool is the leading, most popular multistandard platform for UE testing. The R&S®CMWrun automation software meets all requirements for executing remote control test sequences on the R&S®CMW in R&D, quality assurance, production and service for both current and future wireless equipment.
The power of testing in all phases of the product lifecycle
This document provides the technical specifications of the R&S®CMW-ZSIM UICC switch and programming unit.
R&S®CMWmars is the message analyzer for all R&S®CMW500 signaling applications.
Comment puis-je augmenter la résolution d'affichage pour un écran externe sur un CMX CMW500, CMX500 Si un écran est connecté aux ports DVI du CMX, la résolution maximale est 800 x 600 pixels. Comment cette résolution peut-elle être augmentée pour un écran externe ? Comment puis-je augmenter la résolution d'affichage pour un écran externe sur un CMX CMW500, CMX500 Si un écran est connecté aux ports
Transfert de fichiers de l'appareil vers un PC via la connexion LAN (manière simple) FSW, FSV3000, FSVA3000, FPL, CMW500, CMX500, ZNA, ZNB, ZNL, ESW, ESR, ESRP J'ai un fichier sur mon appareil. Comment puis-je l'obtenir d'une manière simple sur mon PC ? Transfert de fichiers de l'appareil vers un PC via la connexion LAN (manière simple) FSW, FSV3000, FSVA3000, FPL, CMW500, CMX500, ZNA, ZNB, ZNL, ESW
CMW500/290/270 : Aucune fonction de signalisation WLAN en plus après la mise à jour du firmware WLAN FAQ, CMW500, CMW270, CMW290 CMW500/290/270 : Aucune fonction de signalisation WLAN en plus après la mise à jour du firmware WLAN CMW500/290/270 : Aucune fonction de signalisation WLAN en plus après la mise à jour du firmware WLAN FAQ, CMW500, CMW270, CMW290 CMW500/290/270 : Aucune fonction de signalisation
Gestion de cartes SIM avec des testeurs de communications sans fil CMW, CMW500, SIM, UICC, LTE, cartes SIM Cet article décrit les questions typiques et les considérations à prendre lors de la gestion de cartes SIM et l'utilisation d'instruments R&S comme par exemple le CMW500. Gestion de cartes SIM avec des testeurs de communications sans fil CMW, CMW500, SIM, UICC, LTE, cartes SIM Cet article décrit
Tests de signalisation NB IoT simultanés en parallèle CMW500, CMW290, Conflit de ressource de signalisation Il est nécessaire d'exécuter deux tests de signalisation NB IoT simultanément en parallèle. Cela est-il possible pour un testeur de boîtier d'appel CMW ? Tests de signalisation NB IoT simultanés en parallèle CMW500, CMW290, Conflit de ressource de signalisation Il est nécessaire d'exécuter deux
LTE UE capabilities Interpretation of Bandwidth Combination Set values shown in CMW Callbox CMW500, CMW290 LTE UE capabilities Interpretation of Bandwidth Combination Set values shown in CMW Callbox LTE UE capabilities Interpretation of Bandwidth Combination Set values shown in CMW Callbox CMW500, CMW290 LTE UE capabilities Interpretation of Bandwidth Combination Set values shown in CMW Callbox
Statut du patch ATE ATT v17.30 et les problèmes connus FAQ, ATE, ATT, statut du patch Statut du patch ATE ATT v17.30 et les problèmes connus Statut du patch ATE ATT v17.30 et les problèmes connus FAQ, ATE, ATT, statut du patch Statut du patch ATE ATT v17.30 et les problèmes connus
Utilisation du dongle pour la gestion de la licence CMW500, dongle, CMWPC, CMW, licence, CMWrun, CMWmars Mon SW nécessite de valider son utilisation à l'aide d'une licence disponible dans un dongle pour le test avec le CMW 270/290/500, quelles sont les exigences ? Utilisation du dongle pour la gestion de la licence CMW500, dongle, CMWPC, CMW, licence, CMWrun, CMWmars Mon SW nécessite de valider son
Réglage d'un CMW comme un générateur de paquet Bluetooth LE CMW270, CMW290, CMW500, conflit de ressource en mode de test direct DTM du Bluetooth LE Réglage d'un CMW comme un générateur de paquet Bluetooth LE Réglage d'un CMW comme un générateur de paquet Bluetooth LE CMW270, CMW290, CMW500, conflit de ressource en mode de test direct DTM du Bluetooth LE Réglage d'un CMW comme un générateur de paquet
CMW LTE Attach Reject and APN Handling CMW500, Rejet APN, Attach Reject, TAU Reject Dans les réseaux mobiles commerciaux, l'opérateur désactive l'accès aux services de données lorsqu'un appareil mobile utilise un APN non autorisé. Comment cela peut-il être testé dans le CMW et qu'est ce qui doit être configuré ? CMW LTE Attach Reject and APN Handling CMW500, Rejet APN, Attach Reject, TAU Reject Dans
Débogage CMWrun Test Plan Hints CMWrun, CMW270, CMW290, CMW500, plan de test NAV INV NCAP Pendant un test CMWrun, mon DUT ne parvient pas à délivrer des mesures isolées en utilisant le CMW270/290/500. Débogage CMWrun Test Plan Hints CMWrun, CMW270, CMW290, CMW500, plan de test NAV INV NCAP Pendant un test CMWrun, mon DUT ne parvient pas à délivrer des mesures isolées en utilisant le CMW270/290/500.
L'application CMWcards installée sur un PC externe ne parvient pas à communiquer avec le testeur de radio mobile CMW500/290 CMW, CMW500, CMW290, CMWcard L'installation de CMWcards a été effectuée sur un PC externe qui devrait contrôler le testeur radio mobile CMW via l'interface LAN. Mais le PC et le CMW sont également connectés sur la même connexion distante LAN qui ne fonctionne pas et la vérification
Réglage du ventilateur interne du CMW500/2xx pour réduire le bruit Réglage du ventilateur interne du CMW500/2xx pour réduire le bruit
Rapport CQI (Chanel Quality Identifier) à partir de l'équipement utilisateur (UE) et mappage correspondant des tests de modulation et TBS sur le CMW500 / CMW290 CQI, Chanel Quality Identifier, CMW500, CMW290 Comment le CQI (Chanel Quality Identifier) depuis l'équipement utilisateur et le mappage spécifié 3GPP pour la modulation et le TBS peuvent-ils être testés ? Rapport CQI (Chanel Quality Identifier
Conflit de ressources lors de l'utilisation des RFxCOM et RFxOUT du terminal RF du CMW500/2xx en parallèle CMW500, CMW290, CMW270, Terminal RF, Conflit de ressources, GPRF Le CMW500/2xx indique un conflit de ressources dans cette situation lors de l'utilisation en parallèle du port RFxCOM et du port RFxOUT du même terminal RF. Conflit de ressources lors de l'utilisation des RFxCOM et RFxOUT du terminal
Comment obtenir des fichiers journaux Wireshark pour IMS (VoLTE, VoWiFi) lors de l'utilisation du CMW500 / CMW290 FAQ VoLTE, VoWiFi lors de l'utilisation d'un CMW500, CMW290 Comment obtenir des fichiers journaux Wireshark pour IMS (VoLTE, VoWiFi) lors de l'utilisation du CMW500 / CMW290 Comment obtenir des fichiers journaux Wireshark pour IMS (VoLTE, VoWiFi) lors de l'utilisation du CMW500 / CMW290
Comment générer le fichier log d'un message CMW Mars à partir du test existant qui est sauvegardé sur le CMW CMW, MARS, msglog, rsmsglog Comment les enregistrements hors ligne peuvent-ils être analysés avec l'outil de visualisation des messages CMW Mars pour le test existant enregistré sur le CMW. Comment générer le fichier log d'un message CMW Mars à partir du test existant qui est sauvegardé sur
Tests de ping en utilisant le CMW500 dans une cellule LTE CMW, LTE, Ping, CMW500, CMW290, DAU Est-il possible de configurer un test paire à paire IP en utilisant un CMW500 entre un réseau d'entreprise et un EUT relié à une cellule LTE ? Tests de ping en utilisant le CMW500 dans une cellule LTE CMW, LTE, Ping, CMW500, CMW290, DAU Est-il possible de configurer un test paire à paire IP en utilisant un
CMsquares download file not available in R&S Installation Manager Installation Manager, CMW500, CMW290, CMsquares CMsquares download file not available in R&S Installation Manager CMsquares download file not available in R&S Installation Manager Installation Manager, CMW500, CMW290, CMsquares CMsquares download file not available in R&S Installation Manager
Comment configurer un déclenchement externe sur CMW500, CMW290, CMW270 pour synchroniser avec des trames temporelles du signal LTE Déclenchement externe, CMW500, CMW290, CMW270, synchronisé, trames temporelles du signal LTE Comment configurer un déclenchement externe sur CMW500, CMW290, CMW270 pour synchroniser avec des trames temporelles du signal LTE Comment configurer un déclenchement externe sur
Indicateur de bande passante EVS VoLTE et appel VoWiFi sur l'interface utilisateur CMW500/CMW290 VoLTE, VoWiFi, EVS, SWB, CMW500, CMW290, CMW Pendant la configuration de l'appel avec VoLTE/VoWiFi avec le codec vocal EVS, la bande passante est négociée. Comment la bande passante peut-elle être configurée et comment peut-elle être affichée dans l'interface utilisateur du CMW ? Indicateur de bande passante
CMW500 : Problèmes durant les mesures WLAN CMW500, WLAN, FAQ Problèmes durant les mesures WLAN CMW500 : Problèmes durant les mesures WLAN CMW500, WLAN, FAQ Problèmes durant les mesures WLAN
CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans Bluetooth LE interfer, CMW270, CMW290, CMW500, CMWrun, attenuation CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans. CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans Bluetooth LE interfer, CMW270, CMW290, CMW500, CMWrun, attenuation CMWrun Settings for external Interfer usage in Bluetooth
The document provides the technical specifications of the R&S®WinIQSIM2 simulation software.
English (PD 3607.1736.82)
Analyse DTMF sur un CMW500 et un CMW290 FAQ, DTMF, CMW500, CMW290, VoLTE Analyse DTMF sur un CMW500 et un CMW290 Analyse DTMF sur un CMW500 et un CMW290 FAQ, DTMF, CMW500, CMW290, VoLTE Analyse DTMF sur un CMW500 et un CMW290
L'intermodulation et les tests de performance de blocage ont échoués pour le récepteur Bluetooth CMW500 Les tests d'intermodulation et de performance de blocage du récepteur Bluetooth échouent avec tous les DUT lors de l'utilisation d'un générateur de signaux externe pour générer les signaux d'interférences. L'intermodulation et les tests de performance de blocage ont échoués pour le récepteur Bluetooth