R&S®ROMES4 Drive test software

Mobile coverage and QoS measurements in mobile networks

R&S®ROMES drive test software
Lightbox öffnen
R&S®ROMES with QualiPoc test smartphone
Lightbox öffnen
R&S®ROMES with test smartphone and scanner
Lightbox öffnen
R&S®ROMES drive test software R&S®ROMES with QualiPoc test smartphone R&S®ROMES with test smartphone and scanner

Key facts

  • Supports latest technologies, such as NB-IoT and Cat-M1
  • Supports test smartphones, with on-device test capabilities
  • 5G NR, GSM, WCDMA, CDMA2000®, 1xEV-DO, WiMAX™, LTE, NB‑IoT, Cat-M1 and TETRA
  • Unique scanner features: ACD, DLAA, NB-IoT
  • RF and QoS testing capabilities in one tool
  • LTE NB-IoT

Network engineering, optimization and troubleshooting for all mobile technologies

RF and QoS measurements in one tool with instant results

R&S®ROMES4 is the universal software platform for network engineering, network optimization and troubleshooting. In combination with test mobile phones and drive test scanners it provides solutions for all essential tasks involved in coverage measurements, interference identification and QoS. In addition to measuring and displaying test parameters, data is processed instantly and statistics are calculated in realtime.

Features & benefits

5G NR Network testing

5G NR is expected to become the leading radio access technology in mobile networks during the next years.

Our newest R&S®TSME6 and R&S®TSMA6 scanners are able to measure 5G NR synchronization signal blocks (SSBs) for all SSB subcarrier spacings and transmission cases, defined for sub 6 GHz bands. R&S®ROMES4 provides new views and signals to keep a clear view on different PCIs and beams/SSBs for all evaluation tasks during measurement and replay.

 

ROMES4 drive test software
Open Lightbox

NB-IoT testing

R&S®ROMES4 provides combined scanner and device NB-IoT network testing capabilities

NB-IoT is a completely new network layer, promising deep indoor coverage and low device power consumption at a low cost point. R&S®ROMES4 in combination with an R&S®TSMx scanner and NB-IoT test-devices provides complete RF and QoS testing capabilities for engineering and network optimization. It supports QualComm and HiSilicon Neul based devices. Detailed trace and visualization capabilities enable full control of the device and its interaction with the network.

ROMES4 drive test software
Open Lightbox

R&S®ROMES4 NB-IoT scanner view

TETRA

TETRA network evaluation with scanners and handsets

R&S®ROMES4 in combination with the network problem analyzer (NPA) offers the complete tool chain to measure the quality of a TETRA network and easily detect problem spots. It supports R&S®TSMx scanners for TETRA as well as leading TETRA handsets for QoS measurements and speech quality analysis. For easy and flexible measurement, all equipment can be carried in a compact backpack and controlled via a tablet.

ROMES4 drive test software
Open Lightbox

TETRA measurement system

Network problem analyzer

The network problem analyzer (NPA) automatically analyzes drive test data to identify problem spots in the network.

The NPA is ideal for network optimization. It is the postprocessing tool for R&S®ROMES4 and QualiPoc measurement data. The NPA can process multiple files and check the network for RF issues, such as lack of coverage and high interference, or service issues, such as low throughput and dropped calls. The NPA supports latest technologies, such as NB-Iot and LTE-M (eMTC)

ROMES4 drive test software
Open Lightbox

R&S®ROMES4 network problem analyzer

BTS position estimation

Automatically identify base station locations based on scanner measurements.

In combination with an R&S®TSMx scanner, R&S®ROMES4 can estimate the location of base stations during the drive test. GSM, WCDMA, LTE-FDD/TDD, CDMA2000, 1xEVDO, Wimax, TETRA and NB-IoT base stations are supported. Network operators can identify base station locations from other networks in case of interference or for co-siting requirements. It is also possible to gain knowledge about competitor network rollouts.

ROMES4 drive test software
Open Lightbox

R&S®ROMES4 in combination with the R&S®TSME scanner

Automatic channel detection (ACD)

Faster setup and fewer redrives when using a scanner

The automatic channel detection feature enables the R&S®TSMx drive test scanners to automatically detect active channels in a specified band. GSM, LTE, UMTS, CDMA2000®/1xEV-DO and NB-IoT networks are supported. The measurement system dynamically identifies new channels and adds them to the workspace during the drive. This is particularly relevant in networks deployed in a shared spectrum with other cellular standards, where channel frequency and channel bandwidth frequently change

ROMES4 drive test software
Open Lightbox

R&S®ROMES4 with automatic channel detection

Uplink and downlink allocation

Assessing the cell load and number of users with passive scanner measurements

R&S®ROMES4 in combination with an R&S®TSMx scanner can measure the eNodeB scheduler allocations in the LTE downlink and uplink direction without the need for a SIM card. When performing tests with a UE, the scanner data is used to assess the load in the cell: if the cell is heavily loaded, quite naturally the UE can only get fewer resources from the scheduler, leading to a reduced throughput. If, however, the cell is not loaded, a low UE throughput must be caused by other reasons, calling for optimization action.

ROMES4 drive test software
Open Lightbox

LTE downlink allocation analysis (DLAA) with scanner.

Multiple measurement devices

Testing latest features even with pre-commercial devices

R&S®ROMES4 supports Qualcomm and Exynos chipset based devices for mobile measurements. Various data jobs can be performed with commercial and even precommercial devices connected to R&S®ROMES4, while receiving full layer 3 information. When using a QualiPoc Android, speech quality can also be evaluated with the POLQA algorithm (ITU-T P.863), and several typical applications such as Facebook, Dropbox and YouTube can be used as test cases.

ROMES4 drive test software
Open Lightbox

R&S®ROMES4 with test smartphones

Product videos

  • Automatic Channel Detection (ACD)

    Automatic channel detection (ACD)

    This video demonstrates automatic channel detection (ACD) for LTE using the R&S®ROMES4.

  • Let’s talk IoT – How to test NB-IoT network coverage

    Let’s talk IoT – How to test NB-IoT network coverage

    Using R&S®ROMES4 and a R&S®TSMx Scanner to test NB-IoT coverage.

Use cases

  • NB-IoT

    Learn more about testing NB-IoT networks and targeted measurement solutions.

    Read more

  • 4x4 MIMO

    Learn more about increasing capacity with 4x4 MIMO and targeted measurement solutions.

    Read more

  • How to test a mobile network

    Learn more about today’s mobile network structure and its challenges.

    Read more

Informationen anfordern

Haben Sie noch Fragen? Benötigen Sie noch zusätzliche Informationen? Nutzen Sie das Formular und wir werden ihnen umgehend antworten.

Marketing-Einverständniserklärung

Ich möchte Informationen von Rohde & Schwarz erhalten per

Was bedeutet das im Einzelnen?

Ich bin damit einverstanden, dass die ROHDE & SCHWARZ GmbH & Co. KG und die im Impressum dieser Website genannte, ROHDE & SCHWARZ zugehörige Gesellschaft oder Niederlassung, mich über den gewählten Kommunikationskanal (E-Mail oder Post) zu Marketing- und Werbezwecken kontaktiert (z.B. zur Übersendung von Informationen über Sonderangebote und Rabattaktionen), die in Zusammenhang mit Produkten und Lösungen aus den Bereichen Messtechnik, sichere Kommunikation, Monitoring and Network Testing, Rundfunk- und Medientechnik sowie Cybersicherheit stehen, aber nicht auf diese beschränkt sind.

Ihre Rechte

Diese Einverständniserklärung kann jederzeit durch Senden einer E-Mail, in deren Betreffzeile "Unsubscribe" steht, an news@rohde-schwarz.com, widerrufen werden. Darüber hinaus enthält jede von uns versandte E-Mail einen Link, durch den das Abbestellen zukünftiger Werbung per E-Mail möglich ist. Weitere Einzelheiten zur Verarbeitung personenbezogener Daten und zum Widerrufsverfahren finden sich in unserer Datenschutzerklärung..

Vielen Dank!

Ihr Rohde & Schwarz-Team

Leider ist bei der Übermittlung der Daten ein Fehler aufgetreten. Bitte versuchen Sie es zu einem späteren Zeitpunkt erneut.
Allgemeine Informationen und rechtliche Hinweise

Unverbindliche Preisempfehlung des Herstellers (UVP). Der dargestellte Preis versteht sich ohne USt. Preise und Angebote richten sich nur an Unternehmer und nicht an private Endverbraucher.