Mobile network testing blog

Stories & insights

Mobile network testing

Written by Arnd Sibila | December 16, 2016

Smart macro network enhancements: Carrier aggregation (part 1)

The popularity of app services among smartphone users poses a serious challenge to mobile operators because data consumption is soaring. With an expected 10-fold increase in the next five years, investments to merely transfer the sheer amount of data are inevitable. So, how can network operators best address these increasing network capacity and performance demands? Carrier aggregation (CA) is one option.

Smart macro network enhancements: Carrier aggregation (part 1)

The various macro network enhancements available today offer a cost-efficient and smart approach to capacity increase. To make the most of these investments, however, it is vital to continuously measure the capacity before and after changes have been made – at best with measurement and test solutions that depict capacity and performance from a real end-user perception.

Before exploring the role of mobile network testing in enabling operators to make well-informed decisions about appropriate technologies, this article series explains in 3 parts the various “smart macro network enhancements” by describing the:

  • fundamentals of the technological approach
  • challenges that operators are facing during capacity enhancement projects
  • tools to support operators with these tasks

The hardware-related capacity enhancing features discussed in this series include carrier aggregation (CA), antenna tilt optimization, and 4×4 MIMO.

Carrier aggregation

This post’s focus is on carrier aggregation – without a doubt, today’s most important LTE-Advanced feature. With carrier aggregation, a base station can aggregate 2 or more plain LTE carriers for 1 user in the same (co-located or with a gap in between) or in different frequency bands. The aim is to increase the peak data rate per user. Users may get their data transmitted much faster so that resources are freed up for others.

Smart macro network enhancements: Carrier aggregation (part 1)

Apart from this bundle gain, however, carrier aggregation is not a true capacity enhancement feature. As we understand it, capacity enhancement transmits more data over the same amount of air interface resources. With carrier aggregation, the cell capacity is undoubtedly increased, but rather by investing in more spectrum (i.e., more air interface resources).

Carrier aggregation ecosystem

Carrier aggregation is neither a big problem for mobile network testing nor the base station hardware since the hardware is often prepared for bandwidths ranging from 40 to 80 to up to a few 100 MHz. It’s more an issue concerning user equipment (UE) categories due to limited chipset capabilities defined by the 3GPP standard.

The ecosystem for carrier aggregation is quite advanced already: according to the April release of the Global mobile Suppliers Association (GSA) figures, commercially available are:

  • 300 different user devices with up to 300Mbps (UE Cat 6)
  • 40 devices with up to 450Mbps (UE Cat 9)
  • 8 devices with up to 600Mbps (UE Cat 11/12)

The UE categories often provide alternatives in aggregated carriers, MIMO schemes (2×2, 4×4), and modulation and coding schemes such as 64QAM or 256QAM. Currently, all these commercial devices (the number is continuously increasing) use carrier aggregation to achieve high downlink data rates.

Rohde & Schwarz mobile network testing supports all major commercially available smartphones as test devices (incl. our QualiPoc Android platform), which support all kinds of carrier aggregation combinations.

Related stories

Smart macro network enhancements: 4x4 MIMO (part 2)

Smart macro network enhancements: 4x4 MIMO (part 2)

Read more

Smart macro network enhancements: Antenna tilt optimization (part 3)

Smart macro network enhancements: Antenna tilt optimization (part 3)

Read more

HetNets/small cells: Indoor deployments overview

HetNets/small cells: Indoor deployments overview

Read more

Subscribe MNT blog

Sign up for our newsletter

Stay up to date and get stories and insights with our frequent mobile network testing newsletter.

Stories by category

Benchmarking & optimization
Benchmarking & optimization

More information

Field services & interference hunting
Field services & interference hunting

More information

Innovations in mobile network testing
Innovations in mobile network testing

More information

Testing from RF to QoE
Testing from RF to QoE

More information

Informationen anfordern

Haben Sie Fragen oder benötigen Sie weitere Informationen? Nutzen Sie hierzu einfach unser Kontaktformular und wir setzen uns umgehend mit Ihnen in Verbindung.

Ich möchte Informationen von Rohde & Schwarz erhalten per

Marketing-Einverständniserklärung

Was bedeutet das im Einzelnen?

Ich bin damit einverstanden, dass die ROHDE & SCHWARZ GmbH & Co. KG und die im Impressum dieser Website genannte, ROHDE & SCHWARZ zugehörige Gesellschaft oder Niederlassung, mich über den gewählten Kommunikationskanal (E-Mail oder Post) zu Marketing- und Werbezwecken kontaktiert (z.B. zur Übersendung von Informationen über Sonderangebote und Rabattaktionen), die in Zusammenhang mit Produkten und Lösungen aus den Bereichen Messtechnik, sichere Kommunikation, Monitoring and Network Testing, Rundfunk- und Medientechnik sowie Cybersicherheit stehen, aber nicht auf diese beschränkt sind.

Ihre Rechte

Diese Einverständniserklärung kann jederzeit durch Senden einer E-Mail, in deren Betreffzeile "Unsubscribe" steht, an news@rohde-schwarz.com, widerrufen werden. Darüber hinaus enthält jede von uns versandte E-Mail einen Link, durch den das Abbestellen zukünftiger Werbung per E-Mail möglich ist. Weitere Einzelheiten zur Verarbeitung personenbezogener Daten und zum Widerrufsverfahren finden sich in unserer Datenschutzerklärung..

Ihre Anfrage wurde erfolgreich versendet. Wir nehmen in Kürze Kontakt mit Ihnen auf.
An error is occurred, please try it again later.