Download-Center

Provides information on security issues when working with R&S®SMBV100A in secure areas.

Englisch - 13.03.2017

Describes the specific functions of the application, including the remote control commands with programming examples.

Englisch - 26.01.2022

Provides the information required to prepare the instrument for use and start working.

Englisch - 20.12.2017

This application note explains how to synchronize the signals from multiple R&S®SMBV100A vector signal generators in time.The synchronization of the instruments is based on a master-slave principle where one R&S®SMBV100A acts as master and supplies all necessary synchronization signals to the other instruments (slaves). The setup is simple and provides highly synchronized test signals. Time synchronous signals are needed in several applications. The master-slave setup is ideal for basic MIMO tests, certain GNSS test scenarios and WLAN IEEE 802.11ac non-contiguous channel generation. Furthermore, synchronous baseband signals are the basis for generating phase coherent RF signals with the R&S®SMBV100A.

Englisch - 09.07.2013

Englisch - 09.12.2025

Deutsch - 09.12.2025

Englisch - 19.05.2022

The R&S®SMBV100A is both, a versatile general-purpose vector signal generator and a powerful GNSS signal simulator. It can simulate up to 24 satellites in realtime for testing GNSS receivers flexibly, reliably, and cost-efficiently. The R&S®SMBV100A supports receiver testing under realistic conditions by offering features such as obscuration simulation and automatic multipath generation. Out of a multitude of possible test scenarios – with predefined or user-specific settings – this application note presents some examples to give an impression of the instrument’s capabilities.

Englisch - 19.04.2018

The R&S®SMBV100A vector signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMBV100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

Englisch - 10.10.2016

Describes the specific functions of the application, including the remote control commands with programming examples.

Englisch - 26.01.2022

Deutsch - 19.05.2022

Testing global navigation satellite system (GNSS) receivers can be done easily, reliably and cost-efficiently by using the R&S®SMBV100A vector signal generator. This GNSS simulator can generate GPS, Glonass, Galileo, and BeiDou signals for up to 24 satellites in real time.This application note explains how to perform automated receiver tests using the R&S®SMBV100A. The presented tests include TTFF, sensitivity, and location accuracy measurements, moving receiver and interference tests, and many more. Basic remote control examples are provided for the individual tests to ease programming. This application note further includes a short guide for parsing NMEA data.

Englisch - 29.07.2014

Describes all instrument functions and remote control commands, including measurement and programming examples, for the base unit.

Englisch - 26.01.2022

Englisch - 18.07.2025

Deutsch - 29.08.2024

Emergency Road Assistance (ERA-GLONASS) is a service provided in the Russian Federation with thegoal of reducing response times for accidents or other emergencies on the roadways. This application note briefly describes the technology behind ERA-GLONASS and presents conformance tests for ERAGLONASS using the R&S®CMW500 RF tester and the R&S®SMBV100A vector signal generator. A Test software for ERA-GLONASS makes it quick and easy to perform these tests with the GSM or WCDMA wireless communications standard. It also shows a test solution for GNSS performance tests for ERAGLONASS using the R&S®SMBV100A vector signal generator and the option R&S®SMBV-K360 together with CMWrun.

Englisch - 24.01.2018

This Application Note describes signal generation with carrier aggregation for 802.16m based on 802.16e signals in practical important configurations using one or more Vector Signal Generators R&S SMU200A or R&S SMBV100A. Various examples illustrate how to analyze these signals using the Vector Signal Analyzer R&S FSQ, R&S FSG or R&S FSV.

Englisch - 22.03.2010

Emergency Call (eCall) is a service provided in Europe with the goal of reducing response times for accidents or other emergencies on the roadways. This application note briefly describes the technology behind eCall and presents conformance tests for eCall using the R&S®CMW500 RF tester and the R&S®SMBV100A vector signal generator. A Test software for eCall makes it quick and easy to perform these tests with the GSM or WCDMA wireless communications standard. It also shows a test solution for GNSS performance tests for eCall using the R&S®SMBV100A vector signal generator and the option R&S®SMBV-K361 together with CMWrun.This application note is outdated. We therefore refer to the newer application note .

Englisch - 24.01.2018

This Application Note describes a software program that provides easy creation and transfer of Pulse Trains between a PC and the R&S SMB100A, R&S SMA100A and R&S SMF100A analog signal generators with the Pulse Train option; or between a PC and the ARB of R&S SMBV100A, R&S SMJ100A or R&S SMU200A vector signal generators.

Englisch - 10.05.2011

The aim of channel sounding is to characterize a radio channel by decomposing the radio propagation path into its individual multipath components. This application note provided by Neul describes how channel sounding can be performed using the R&S SMBV100A Vector Signal Generator and the R&S FSL Spectrum Analyzer. To illustrate the procedure reference is made to 8 MHz wide white space channels in the UK.

Englisch - 12.07.2011

This application note shows how to run 3GPP WCDMA BER and BLER tests according to standard TS 25.141 with the Vector Signal Generators R&S®SMBV100A, R&S®SMJ100A, or R&S®SMU200A. The description of hardware test setup is followed by detailed instructions on how to configure the R&S® generators and how to run a BER or BLER test step by step. Remote control commands for the generators are included, to simplify integrating the BER/BLER tests into your proprietary test suite.

Englisch - 06.03.2009

Multiple antenna systems, known as MIMO systems, form an essential part of today’s wireless communications standards. This multi-antenna technology efficiently boosts the data throughput without requiring additional bandwidth, and has thus become a key technology. Rohde & Schwarz offers high-performance MIMO test solutions which provide static conditions without fading as well as simulation of complex fading scenarios.This application note explains how to set up 4x4 and 8x8 MIMO systems using the R&S®SMBV100A signal generator for measurements under static conditions without fading.For simulation of complex fading scenarios please refer to application note 1GP97.

Englisch - 10.03.2010

The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz. The note will help bring ultranarrowband IoT devices and applications using Sigfox technology to the market as fast as possible and help ensure the desired quality and performance.For R&D, Pre-certification and QA, all currently defined Uplink- and Downlink- measurements are shown using the compact R&S®FPL1000 Spectrum Analyzer and R&S®SMBV100A Vector Signal Generator.For Production, use of the R&S®CMW100A Communications Manufacturing Test Set is shown for the most essential Uplink RF tests on Sigfox Devices.Python scripts for giving example SCPI commands demonstrate how measurements shown in manual use can easily be automated.

Englisch - 15.11.2017