CERTIUM® ANALYSIS

Air traffic control test and measurement solutions

CERTIUM® ANALYSIS
ライトボックスを開く
CERTIUM® ANALYSIS
ライトボックスを開く
CERTIUM® ANALYSIS
ライトボックスを開く
CERTIUM® ANALYSIS
ライトボックスを開く
CERTIUM® ANALYSIS
ライトボックスを開く
CERTIUM® ANALYSIS
ライトボックスを開く
CERTIUM® ANALYSIS, Application Image CERTIUM® ANALYSIS CERTIUM® ANALYSIS CERTIUM® ANALYSIS, Application Image CERTIUM® ANALYSIS, Application Image CERTIUM® ANALYSIS, Application Image

主な特長

  • Designed to keep optimal systems operation and high-quality service
  • Ensures regulatory compliance on communication, navigation and surveillance
  • Calibration and quality assurance of ground and airborne systems
  • Easy-to-use handhelds for outside operation
  • Easy to use interference hunting systems

Brief description

Broad portfolio of market-leading test and measurement solutions for air traffic control

Rohde & Schwarz provides a range of test, measurement and quality assurance equipment for civil air traffic control under the brand CERTIUM® ANALYSIS. These products ensure regulatory compliance and easy operation and maintenance of an entire system. The portfolio ranges from high-quality frequency and signal analyzers for radio, NaVaid and radar testing. It also includes solutions for automated interference hunting and IP network performance monitoring.

特長と利点

Broad portfolio of test and measurement equipment

Aligned set of test and measurement systems for navigation, communication and surveillance solutions

Rohde & Schwarz offers a broad portfolio for all applications within the air traffic control solution from communication to navigation and surveillance. Test and measurement solutions include high-quality frequency and signal analyzers, radio measurement and also IP quality assurance systems. These are applicable for installation, maintenance and troubleshooting, supporting everyday operations maintaining full functional system in compliance with legal requirements.

ライトボックスを開く

In-depth radio testing and calibration

The R&S®CMA180 is the ATC radio testing market standard of both Rohde & Schwarz and other radios

The R&S®CMA180 test set is an all-in-one platform that performs in-depth analysis of air traffic control (ATC) radios, as well as NavAid systems such as ILS, VOR and MB. The integrated signal generator and spectrum and vector analyzer of the R&S®CMA180 allow– among other things – to analyze signal quality, perform power measurements, measure modulation frequency response and carry out squelch sensitivity tests on both the transmitter and receiver side. The battery and antenna of the R&S®CMA180 allow it to also be used as a standalone instrument, which is ideal for aircraft maintenance. These functions may also be automated with the R&S®CMArun software extension and documented in a single report. The R&S®CMA180 features an analog and an ED-137B/C-compatible IP interface. The I/Q recorder allows RF signals to be recorded via the dedicated RF ports. 

R&S®CMA180 with R&S®Series5200 radio
ライトボックスを開く

R&S®CMA180 with R&S®Series5200 radio

Antenna and cable testing

VHF and UHF band antenna and cable testing using R&S®Cable Rider ZPH.

RF communications for air traffic control have specific requirements. To address these, Rohde & Schwarz has prepared a special set of measurement tools. The R&S®Cable Rider ZPH, case in point, is aimed at VHF band antenna and cable testing. It provides cable loss and distance-to-fault measurements, antenna and filter matching, power measurements, as well as entry-level interference hunting features. Other handhelds, such as the R&S®FSH or R&S®ZVH complement its already versatile profile.

Antena measurement using R&S®Cable Rider ZPH
ライトボックスを開く

Antena measurement using R&S®Cable Rider ZPH

Signal monitoring and interference hunting

Clean the spectrum and identify, locate and eliminate interference using R&S®Spectrum Rider FPH or R&S®PR200

The R&S®Spectrum Rider FPH offers comprehensive spectrum monitoring functions for interference hunting. When combined with a directional antenna, the R&S®Spectrum Rider FPH can pinpoint the source of the signal on a map and listen in to the AM or FM modulated signal. For more advanced interference hunting applications, the R&S®PR200 gives you the edge. It offers real-time continuous spectrum monitoring of the entire ATC voice band at once. Even the shortest bursts can be effectively visualized. At the same time, it can also demodulate the signal on one frequency and play it out to provide acoustic feedback about the magnitude of the interference. Together with a high-precision direction finding antenna, the R&S®PR200 provides a fully automated, dynamic  estimation of the interference location during drive tests.

Interference hunting using the R&S®PR200
ライトボックスを開く

Interference hunting using the R&S®PR200

VoIP and RF quality assurance

24/7 voice quality monitoring and assurance using R&S®AVQA

The user expects uncompromising quality from end to end. To achieve this, the provider has to ensure that every element is fully functional all of the time. R&S®AVQA provides this kind of accurate and selective IP and RF monitoring by using probes to capture raw IP data at multiple network nodes and then aggregating it for analysis,  interpretation and trend  recognition. R&S®AVQA provides analytics for  ground-to-ground and air-to-ground calls. The user-friendly graphical interface of R&S®AVQA gives an overview of relevant performance metrics to give the operator real-time quantitative feedback about the state of their system and highlight particular aspects.  

RF signal monitoring using AVQA
ライトボックスを開く

RF signal monitoring using AVQA

Radar monitoring

Radar measuring with the R&S®ZNH handheld vector network analyzer and its numerous addons 

Simple setup of R&S®ZNH in combination with R&S®ZNH-K45 vector voltmeter makes it ideal for field use in a number of scenarios involving comparison measurements between two devices, including for calibration of monopulse radar installations. The option’s pulse measurement capability is complemented by the R&S®ZNH-K29 option. This is another modular add-on that allows R&S®ZNH to perform precise pulse and peak measurements in combination with an additional wideband power sensor. This is useful during the installation and maintenance of radar systems, since R&S®ZNH can measure pulses as short as 50 ns.

R&S®ZNH in use
ライトボックスを開く

R&S®ZNH in use

NaVaids measurement and calibration

Measurement and calibration of ILS/MB, VOR, GBAS, DME using R&S®EVSF1000 and R&S®EVSG1000

R&S provides a broad portfolio on test and measurement solutions for entire lifecycle of NaVaid systems. R&S®EVSG1000 is optimal tool for field measurements on the ground, while R&S®EVSF1000 allows in-flight inspections Additionally, the portfolio comprises signal generation for receiver tests, e.g. R&S®CMA180 on-board equipment radio test set, R&S®SMBV100B and R&S®SMA100B vector signal generators. R&S®FSH vector voltmeter assists on antenna and cable testing.

Airport measurements using R&S®EVSG1000
ライトボックスを開く

Airport measurements using R&S®EVSG1000

利用可能なオプション

一般仕様
プロダクト
概要
概要

ドローン検査システム上でのILS、GBAS、VOR、COMおよびマーカービーコン測定用の信号レベルおよび変調アナライザ

R&S®ZPH Cable Rider、正面図
ZPH
概要

スペクトラム解析による高速かつ効率的なケーブル/アンテナ測定

概要

無線通信テスタ

概要

非介入型の音声品質保証システム

概要

スペクトラムモニタリング、干渉探索、スペクトラムクリアランス、サイトのテストアプリケーションを効果的にサポートするポータブル・モニタリング・レシーバーです。

概要

飛行検査航空機上でのILS、GBAS、VOR、COMおよびマーカービーコン測定用の信号レベルおよび変調アナライザ  

概要

地上でのILS、GBAS、VOR、COMおよびマーカービーコン測定用の信号レベルおよび変調アナライザ  

概要

据え置き型と同等の性能を備えた軽量のフル2ポート・ハンドヘルド・ベクトル・ネットワーク・アナライザ  

概要

ハンドヘルド・スペクトラム・アナライザ、周波数レンジ5 kHz~44 GHz。

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

マーケティング・パーミッション

お問い合わせ内容が送信されました。 後ほどご連絡致します。
An error is occurred, please try it again later.
一般および法的情報

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」に関する利用条件

1. 抽選キャンペーン「10 YEARS ROHDE & SCHWARZ OSCILLOSCOPES」(以降、「抽選」と呼びます)は、Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0(以降、「R&S」と呼びます)によって主催されます。

2. すべての参加者は、2020年1月1日から2020年12月31日までの期間中に、参加者の氏名、会社名、ビジネス用メールアドレスを入力することで抽選への参加登録を行えます。

3. 参加は無料です。商品またはサービスの購入経験の有無は問いません。

4. 抽選は法人のみを対象としており、賞品獲得者は法人に限られます。個人の場合、自分の名前と自分のアカウントによる参加は認められませんが、法人の名前で、その法人の代理として参加フォームを提出することにより、法人の代表として参加することが可能です。

5. 賞品として、2020年1月1日から2020年12月31日までの期間内に、R&S®RTB2000 10台のうちの1台を獲得できます。

賞品:R&S®RTB2000 デジタル・オシロスコープ

6. 抽選は、ローデ・シュワルツ本社、Muehldorstrasse 15, 81671 Munichで行われます。賞品獲得者には、5営業日以内にメールでお知らせいたします。

7. 法人の正式な代表者が、賞品受け取りの意向をローデ・シュワルツに通知するものとします。受け取り辞退が発生した場合、または2週間以内に返事がない場合は、新たな賞品獲得者が抽選によって選ばれます。4週間以内に賞品獲得者を決定できない場合、抽選は終了し、賞品は没収となります。

8. R&Sの従業員とその家族、および抽選処理の関係者とその家族は、参加フォームへの記入対象から除外されます。

9. 賞品の現金同等物または交換は許可されていません。賞品は譲渡できません。参加者の国で課されるすべての税金、徴収金、関税、手数料、およびその他の料金は、参加者が負担するものとします。

10. 個人データは、本抽選キャンペーンの目的でのみ処理され、別段の合意がない限り、抽選から4週間後に削除されます。

11. これらの利用条件に従わない参加者は、R&Sにより本コンペティションへの参加資格を剥奪される場合があります。その場合、賞品を遡って撤回することもできます。これらの利用条件に違反したために賞品が遡及的に取り下げられた場合、賞品はそれぞれの参加者の負担で「1.」に記載されているR&Sの住所に返送されるものとし、抽選で新たな賞品獲得者が選ばれることになります。

12. 参加者は本抽選の賞品を請求することはできず、この点に関して法的手段を講じることは許可されません。

13. 抽選およびR&Sとそれぞれの参加者との間に発生するいかなる契約上の関係も、法の抵触に頼ることなく、ドイツ法に準拠し、同法に従って解釈されるものとします。本競争への参加により直接的または間接的に生じた紛争については、ドイツのミュンヘンの裁判所が専属管轄権を有するものとします。

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.