255 結果
Provides information on security issues when working with R&S®SMBV100A in secure areas.
This document provides the technical specifications of the R&S®SMBV100A vector signal generator.
A state-of-the-art vector signal generator must be flexible and offer good signal characteristics along with an outstanding cost/benefit ratio. In all of these areas, the R&S®SMBV100A sets new standards in the mid-range class of instruments.
Provides the information required to prepare the instrument for use and start working. Basic operations and handling are described.
This document provides the technical specifications of the R&S®SMBV100A vector signal generator.
Whether in the R&D lab or in production, the global navigation satellite system (GNSS) solution for the R&S SMBV100A sets new standards in the field of satellite simulation. It supports all possible scenarios, from simple setups with static satellites all the way to flexible scenarios generated in realtime with up to 24 dynamic GPS, Glonass, Galileo, BeiDou and QZSS/SBAS satellites.
R&S®SMBV100A ベクトル信号発生器 - ビデオ SMBV100Aの概要 GNSSシミュレータは、個別の静止衛星による単純な設定から、最高24個の動的なGPS(C/AおよびPコード)、Glonass、Galileo衛星によってリアルタイムに生成される柔軟なシナリオまで、可能性のあるあらゆるシナリオをサポートします。 GNSSシミュレータは、個別の静止衛星による単純な設定から、最高24個の動的なGPS(C/AおよびPコード)、Glonass、Galileo衛星によってリアルタイムに生成される柔軟なシナリオまで、可能性のあるあらゆるシナリオをサポートします。 SMBV100A ベクトル信号発生器, ビデオ R&Dラボや生産現場において、R&S®SMBV100Aの全地球的航法衛星システム(GNSS)ソリューションは衛星シミュレーションの分野で新しい基準を打ち立てています。
®SMBV-K360 for ERA-Glonass testing,R&S®SMBV-K44, R&S®SMBV-K66, R&S®SMBV-K91, R&S®SMBV-K92, R&S®SMBV-K96, R&S®SMBV-K110, and R&S®SMW-K361 for eCall testing.156 MB1.3.3 09.04.2019 R&S®SMx RF and Baseband Correction Toolkit Software for equalizing I/Q imbalance and RF frequency response of generator setups consiting of a R&S®AFQ100A / R&S®AFQ100B and a R&S®SMU200A / R&S®SMJ100A / R&S®SMATE100A / R&S®SMBV100A
LabWindows/CVI, VXIpnp driver history for the R&S® Vector Signal Generators Products: | R&SSMW200A | R&SSMBV100A | R&SSMM100A | R&SSMU200A | R&SSMBV100B Driver history for LabWindows/CVI and VXIplug&play Instrument Driver for C/C++, VEE, etc.
For information, see the "Open Source Acknowledgment" document on the internet (www.rohde-schwarz.com/firmware/smbv100a/). The following abbreviations are used throughout this document: R&S ® SMBV100A is abbreviated as R&S SMBV100A.
測定例やプログラミング例を含め、ベースユニットの測定機能とリモート制御コマンドをすべて説明します。複数のアプリケーションに対応する一般的な機能についてもいくつか説明します。クイック・スタート・ガイド・マニュアルの内容も記載されています。オンライン版には、R&S®SMBV100A ベースユニットとすべてのオプションのマニュアルが掲載されていて、すぐに表示できます(ダウンロードする必要はありません)。
ローデ・シュワルツの信号発生器は、位相コヒーレント信号の発生のためのコンパクトで使いやすいソリューションを実現します。さまざまな信号発生器モデルを結合させることにより、ユーザーの要件に応じた位相コヒーレントチャネル数やRF周波数レンジを実現できます。このアプリケーションノートでは、位相コヒーレント信号の作成方法を説明し、考慮すべき事項や、個々のチャネル間の相対位相とタイミングを最適に校正する方法についても詳述します。このアプリケーションノートでは、さまざまなRF周波数の時間軸上での位相安定度の各種測定についても紹介します。
9月 07, 2016 | AN 番号 1GP108
ソフトウェア定義無線機(SDR)の概念は、当初民生用の携帯電話機に実装されましたが、現在は軍事用無線機の分野でも用いられるようになっています。このアプリケーションノートでは、軍事用無線機でのSDRの使用と、ローデ・シュワルツから提供されている関連する電子計測ソリューションについて紹介します。
9月 15, 2012 | AN 番号 1MA206
信号の複雑化と帯域幅の拡大に伴い、通信、監視、電子支援対策(ESM)、信号インテリジェンスシステム(SIGINT)といった分野では、変化の激しい複雑なRF環境を正しく表現するために、電子計測のための膨大な作業が必要になっています。できるだけ自然な、ただし制御された条件で性能と機能を検証するために、手間のかかるフィールドテストが行われる場合も多くあります。これには多くの費用と時間がかかります。電子計測器によってRF信号環境を作成することにより、制御されたコスト効果の高い再現可能な環境が存在するラボ内で、フィールドテストを行うことができます。R&S®パルス・シーケンサー・ソフトウェアは、任意の現実的なRF信号シナリオを作成できる汎用的なツールです。これにより、現実の環境に対するシステムの対応を確認できます。このアプリケーションノートでは、R&S®パルス・シーケンサー・ソフトウェアを紹介し、研究、開発、稼働前、稼働中のテストに使用できるいくつかの例について詳細に説明し、自己定義された任意の現実的なRF信号環境の作成に必要な手順を示します。
1月 17, 2017 | AN 番号 1MA288
急成長中のモバイル無線規格であるLTEは、3GPPリリース8から始まりました。リリース9では、初めての改良と新機能の追加が行われました。このアプリケーション・ノートでは、ローデ・シュワルツの測定器を使用したLTEリリース9の機能の電子計測方法について説明します。
4月 26, 2013 | AN 番号 1MA210
緊急ロードアシスタンス(ERA-Glonass)は、道路上で発生した事故などの緊急事態に対する応答時間を短縮することを目的として、ロシアで提供されているサービスです。このアプリケーションノートでは、ERA-Glonassの背後にあるテクノロジーについて簡単に説明し、R&S®CMW500 RFテスターとR&S®SMBV100A ベクトル信号発生器を使用したERA-Glonassのコンフォーマンステストを紹介します。ERA-Glonass用のテストソフトウェアを使用すれば、これらのテストをGSMまたはWCDMA無線通信規格を使用して短時間で簡単に実行できます。
1月 24, 2018 | AN 番号 1MA251
This white paper provides a brief technology introduction on the 802.11ac amendment to the successful 802.11-2007 standard. 802.11ac provides mechanisms to increase throughput and user experience of existing WLAN and will build on 802.11n-2009.
May 23, 2012 | AN 番号 1MA192
High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) optimize UMTS for packet data services in the downlink and uplink, respectively. Together, they are referred to as High Speed Packet Access (HSPA). Within 3GPP Release 7, 8, 9 and 10, further improvements to HSPA have been specified in the context of HSPA+ or HSPA evolution. This Application Note describes how HSPA+ features can be tested using Rohde & Schwarz instruments.
Apr 26, 2013 | AN 番号 1MA121
5G networks will need to offer more capacity and flexibility while lowering the operational expenses of the system. Two new technologies can simultaneously address both the increase in capacity and the increase in energy efficiency: Virtualization & Massive MIMO. This white paper provides an overview of test solutions addressing current and future requirements for antenna verification including both conducted and over-the-air (OTA) test methods, which result from applying Massive MIMO antenna technology.This white papers complements the white paper (1MA276) from Rohde & Schwarz, which introduces fundamental theory behind beamforming antennas and provides calculation methods for radiation patterns, a number of simulation results as well as some real world measurement results for small linear arrays.
Nov 11, 2016 | AN 番号 1MA286
Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting test instrumentation to Windows®-based computers via local area networks (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to reduce risks while ensuring that instrument performance is not compromised. The paper also discusses the use of anti-virus software in combination with Embedded Linux based instruments.
Nov 23, 2016 | AN 番号 1GP112
このアプリケーション・ノートでは、ローデ・シュワルツのベクトル信号発生器(VSG)を使用して、規格に準拠したIEEE 802.15.4テスト信号を作成/発生する方法について説明します。
1月 08, 2016 | AN 番号 1GP105
The R&S®WinIQSIM2™ simulation software has been especially developed for easily generating digitally modulated signals. The graphical user interface allows intuitive operation, supported by context-sensitive help. By offering a convenient way to create any standard-conforming waveform with all the included standards and to generate multicarrier signals as well as multisegment waveforms, R&S®WinIQSIM2™ is suitable for a wide range of applications.
This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB: The first one uses VISA connection and direct SCPI commands. The second approach takes advantage of Rohde & Schwarz VXI plug&play instrument drivers and MATLAB Instrument Control Toolbox.
Jun 12, 2017 | AN 番号 1MA171
Alternatives to the AFQ could be an R&S® AFQ100B, an R&S ® AMU200A or an R&S ® SMBV100A, for example.
7月 28, 2009 | AN 番号 1GP76
Signal Generation and Analysis Application Note Products: | R&S �SMU200A | R&S �SMBV100A | R&S �AMU200A | R&S �FSQ | R&S �FSG | R&S �FSV | R&S �FSL This Application Note describes signal generation with carrier aggregation for 802.16m based on 802.16e signals in practical important configurations using one or more Vector Signal Generators R&S�SMU200A or R&S �SMBV100A.
3月 22, 2010 | AN 番号 1MA173
For several years, automobile makers and government agencies have sought ways to improve safety on roadways and effectively manage traffic flow. As wireless communication systems are advancing, the vision of automobiles talking to each other and to roadside units is becoming a reality. These planned automotive wireless communication systems are known as ITS (Intelligent Transportation System). This paper will provide an overview of the current status of the ITS worldwide with a focus on the IEEE 802.11p PHY. Additionally, the paper provides information on test and measurement solutions for devices and components used in ITS.
Jan 23, 2014 | AN 番号 1MA152