제품 R&S®FSW 브로셔 및 데이터시트

This document provides the technical specifications of the R&S®FSW signal and spectrum analyzer.

The high-performance R&S®FSW signal and spectrum analyzer helps engineers accomplish the most demanding tasks. Its wide internal analysis bandwidth allows the characterization of wideband components and communications systems. Its unparalleled phase noise facilitates the development of high-performance oscillators such as those used in radars. A state-of-the-art multitouch display with gesture support ensures straightforward and intuitive operation. An embedded SCPI recorder enables easy creation of executable scripts.

왼쪽으로 슬라이드 오른쪽으로 슬라이드

R&S®FSW Signal and Spectrum Analyzer - Product Brochure

R&S®FSW Signal and Spectrum Analyzer - Product Brochure JA

R&S®FSW Signal and Spectrum Analyzer - Product Brochure RU

R&S®FSW Signal and Spectrum Analyzer - Product Brochure ZH-CN

Specifications for the R&S®FSW-K17 Multicarrier Group Delay Measurements option for the R&S®FSW signal and spectrum analyzer

160 MHz Real-time spectrum analyzer option

Reference measurements for calibrating navigation receivers, Production test measurements of ILS/VOR ground stations, Measurement and calibration of ramp testers

160 MHz Real-Time Measurement Application, POI > 15 μs

Equipped with the R&S®FSW-B512R real-time spectrum analyzer option, the R&S®FSW displays RF spectra seamlessly and in real time.

This document provides the technical specifications of the R&S®VSE-K149/FSx-K149 high rate pulse repetition frequency ultrawideband measurements.

This document provides the technical specifications of the R&S®FSW-K95/-K97 WLAN IEEE 802.11ad/ay measurement application.

Tackling a standard with wide bandwidth and high frequency

English (PD 3606.7724.22)

English (PD 3607.1842.22)

Technical specifications of the R&S®FSW-K201 OneWeb Reverse Link (SC-FDMA) measurement application for the R&S®FSW signal and spectrum analyzer

English (PD 5214.6616.22)

DOCSIS testing requirements include supporting a full channel load and coexistence of both DOCSIS 3.0 and DOCSIS 3.1 signals (in some cases analog TV as well). The R&S®CLGD is the only flexible and compact solution available on the market that can meet these testing requirements. The introduction of much wider bandwidths for DOCSIS 3.1 along with higher constellation modes (up to 16kQAM) require very powerful spectrum and signal analyzers. The R&S®FSW is ideal since it can measure MER that is typically 57 dB and higher and also provide BER measurements based on DOCSIS 3.1 signals.

R&S®FSW-B512R real-time spectrum analyzer 512 MHz, R&S®FSW-B800R real-time spectrum analyzer 800 MHz, R&S®FSW-K161R real-time spectrum measurement application 160 MHz, R&S®FSW-K512RE real-time spectrum measurement application 512 MHz, R&S®FSW-K800RE real-time spectrum measurement application 800 MHz

This document provides the technical specifications of tthe R&S®VSE-K6 pulse measurement application.

This document provides the technical specification of the EMI measurement application for signal and spectrum analyzers – R&S®FSW-K54, R&S®FSV3-K54, R&S®FPL1-K54, R&S®FSV-K54.

The EMI measurement application (K54 option) adds EMI precompliance measurement functions to the following spectrum analyzers: R&S®FSW, R&S®FSVA3000, R&S®FSV3000, R&S®FPL1000 and R&S®FSVR. It is the ideal EMI analysis extension for product development and a smooth certification process. Typical application fields include commercial, automotive, avionics and military product development (CISPR, EN, FCC, DO‑160 and MIL-STD-461 standards).

This document provides the technical specifications of the phase noise measurement application: R&S®FSW-K40, R&S®FSMR3-K40, R&S®FSV3-K40, R&S®FPS-K40, R&S®FSV-K40, R&S®FPL1-K40.

Technical specifications of the noise figure measurement options: R&S®FSW-K30, R&S®FSWP-K30, R&S®FSMR3-K30, R&S®FSV3-K30, R&S®FPS-K30, R&S®FSV-K30, R&S®FPL1-K30.

The R&S®FS-SNS smart noise sources enable simple and accurate noise figure and gain measurements by automatically loading all necessary setup parameters and taking the environmental temperature into account. Measurement uncertainty is calculated automatically and can even be displayed on the result screen.

왼쪽으로 슬라이드 오른쪽으로 슬라이드

R&S®FS-SNS Smart Noise Sources - Product Brochure

R&S®FS-SNS Smart Noise Sources - Product Brochure DE

This document provides the technical specifications of the R&S®FS-SNS smart noise sources.

Test solutions for safety and security in the new aviation era

Enhanced Specifications for AM/FM/φM Modulation Analysis

Rohde & Schwarz signal and spectrum analyzers equipped with the R&S®FSx-K30 option form the basis of a solution to accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.

High precision test solutions for todays and tomorrows ADAS-radar

The R&S®VSE-K96 OFDM analysis software adds the capability to include modulation measurements on general OFDM signals. The OFDM demodulator is user-configurable and standard-independent.

When it comes to wideband signal generation and analysis, Rohde & Schwarz provides solutions that go all the way to millimeterwave frequencies and even beyond. Our signal generation and analysis solution portfolio covers the bandwidth and frequency requirements for 5G and offers a wide range of features and application software to address 5G testing challenges.

왼쪽으로 슬라이드 오른쪽으로 슬라이드

Signal generator, signal and spectrum analyzer and power sensor solutions for 5G - Application Brochure

Signal generator, signal and spectrum analyzer and power sensor solutions for 5G - Application Brochure JA

This document provides the technical specifications of the R&S®VSE-K70x/FSx-K70x/FPx-K70x vector signal analysis application.

Active electronically scanned array and antenna testing

Choosing the right instrument for your application

This document provides the technical specifications of the R&S®VSE-K7/Fxx-K7/RTO AM/FM/PM modulation analysis option.

The -K10x options cover the inband measurements of 3GPP LTE and LTE advanced. The R&S®VSE-K100/-K102/-K104 options provide convenient analysis due to automatic detection of modulation formats. Each signal subframe is analyzed and the QPSK, 16QAM or 64QAM modulation formats plus the length of the cyclic prefix are automatically detected and used in the analysis. The cell identity can also be automatically detected, which reduces the number of settings required by the user to a minimum.

The measurement setup includes an R&S®FSW or R&S®FSV(A)3000 signal and spectrum analyzer or R&S®VSE compliant instruments with an R&S®SMW200A, R&S®SMM100A or R&S®SMBV100A vector signal generator. The closed loop system enables control of the signal generator and automatic synchronization.

This document provides the technical specifications of the R&S®VSE-K10, R&S®FSx-K10 GSM measurements

This document provides the technical specifications of the R&S®FSx-K50 spurious measurement application.

This document provides the technical specifications of the R&S®VSE-K144/-K146, R&S®FSx-K144/-K145/-K147/-K148 5G NR measurement application

This document provides the technical specifications of the R&S®FSx-K18x amplifier measurements.

This document provides the technical specifications of the R&S®VSE-K91/FSx-K91/FPS-K91 WLAN IEEE 802.11a/b/g/j/p/n/ac/ax/be measurement application.

Test and measurement solutions for in-orbit satellites: Once a communications satellite is on its target orbit, several routines need to be performed in order to ensure proper performance of the transponders in the payload. On-orbit measurements are also a vital part of live satellite maintenance. This application brochure focuses on a few important post-launch measurement setups where Rohde & Schwarz offers unique instruments.

왼쪽으로 슬라이드 오른쪽으로 슬라이드

Ground station testing on satellites in orbit

Ground station testing on satellites in orbit JA

This document provides the technical specifications of the R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT measurement application.

This document provides the technical specifications of the R&S®VSE-K60/R&S®FSx-K60 transient measurement application, the R&S®VSE-K60C/R&S®FSx-K60C transient chirp measurements and the R&S®VSE-K60H/R&S®FSx-K60H transient hop measurements.

Rohde & Schwarz helps engineers develop and test satellite transponders, modules and components by providing the test and measurement solutions that the satellite market needs.

왼쪽으로 슬라이드 오른쪽으로 슬라이드

Satellite payload and components testing with instruments from Rohde & Schwarz - Application Brochure

Satellite payload and components testing with instruments from Rohde & Schwarz - Application Brochure JA