R&S®NGL200 Power supply series

R&S®NGL202
라이트박스 열기
R&S®NGL202
라이트박스 열기
R&S®NGL202
라이트박스 열기
R&S®NGL202
라이트박스 열기
R&S®NGL201
라이트박스 열기
R&S®NGL201
라이트박스 열기
R&S®NGL201
라이트박스 열기
R&S®NGL201
라이트박스 열기
R&S®NGL201 and R&S®NGL202
라이트박스 열기
R&S®NGL202 R&S®NGL202 R&S®NGL202 R&S®NGL202 R&S®NGL201 R&S®NGL201 R&S®NGL201 R&S®NGL201 R&S®NGL201 and R&S®NGL202

Key facts

  • Max. output power: 120 W
  • Voltage per channel: 0 V to 20 V
  • Max. current per channel: 6 A
  • Load recovery time: < 30 µs
  • Ripple and noise: < 500 µVRMS / < 1 mARMS

~에서 시작하기 KRW2,884,900

  • 3-years-warranty

High precision source and sink

Due to their high accuracy and fast load recovery time, the R&S®NGL200 power supply series is perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable them to handle fast load changes that occur for example when mobile communications devices switch from sleep mode to transmit mode.

Features & benefits

Optimized load recovery time

Consumer electronics such as mobile phones and IoT devices require very little current in sleep mode. However, the current requirement increases abruptly as soon as they switch to transmit mode. A power supply used to power such DUTs must be capable of handling current increases from a few µA to the ampere range without creating voltage drops or overshoots.

Thanks to their fast load recovery time of < 30 µs even during a challenging load change, the R&S®NGL200 power supplies are ideal for powering IoT and other battery-operated devices.

NGL200
Open Lightbox

Exceptionally fast load recovery time

6 ½ digit resolution

With a resolution of up to 6½ digits when measuring voltage, current and power, the R&S®NGL200 power supply series is perfect for characterizing devices with low standby power consumption and high current in full load operation. The entire measuring range is covered without having to switch ranges. This results in faster measurements. In many cases, an additional digital multimeter is no longer necessary.

NGL200
Open Lightbox

6 ½ digit resolution in V/I metering

Minimal ripple and noise

Advanced electronic circuitry is often very complex and sensitive to interference on the supply lines. In order to supply interference-free voltage to such sensitive DUTs, the power supplies must provide extremely stable output voltages and currents. All types of ripple and noise need to be avoided. The R&S®NGL200 power supplies have linear regulation and are ideal for sensitive DUTs.

NGL200
Open Lightbox

Two-quadrant operation

The two-quadrant architecture of the R&S®NGL200 power supplies allows them to function both as a source and a sink and simulate batteries or loads. The power supply automatically switches from source to sink mode. As soon as the externally applied voltage exceeds the set nominal voltage, current flows into the power supply. This is indicated by a negative current reading.

NGL200
Open Lightbox

Source and sink operation

Available models

  • Model name

    R&S®NGL201

    Order number 3638.3376.02

    Number of output channels
    1
    Max. output power
    60 W
    Output voltage per channel
    0 V to 20 V
    Output current per channel
    ≤ 6 V: 0 A to 6 A
    > 6 V: 0 A to 3 A
    Starting at
  • Model name

    R&S®NGL202

    Order number 3638.3376.03

    Number of output channels
    2
    Max. output power
    120 W
    Output voltage per channel
    0 V to 20 V
    Output current per channel
    ≤ 6 V: 0 A to 6 A
    > 6 V: 0 A to 3 A
    Starting at
Specifications
Electrical specifications
Number of output channels   1/2
Total output power   max. 60 W/120 W
Maximum output power per channel   60 W
Output voltage per channel   0 V to 20 V
Maximum output current per channel   ≤ 6 V: 6 A
    > 6 V: 3 A
Voltage ripple and noise (20 Hz to 20 MHz)   < 500 µV (RMS)
    < 2 mV (peak-to-peak) (meas.)
Current ripple and noise (20 Hz to 20 MHz)   < 1 mA (RMS) (meas.)
Load recovery time*1)   < 30 µs
Programming resolution Voltage 1 mV
  Current 0,1 mA
Output measurements
Measurement functions   voltage, current, power, energy
Readback resolution Voltage 10 µV
  Current 10 µA
Readback accuracy (± (% of output + offset)) Voltage < 0.02% + 2 mV
  Current < 0.05% + 250 µA
Special functions
Measurement functions   voltage, current, power, energy
Protection functions   OVP, OCP, OPP, OTP
FuseLink function  
Fuse delay at power-up  
Sense function  
Sink mode  
Output sequencing  
Trigger input/output  
Arbitrary function   ● (QuickArb)
Analog/modulation interface  
Data logging  
Display and interfaces
Display   TFT 5" 800 pixel x 480 pixel WVGA touch
Rear panel connections   connector block with 4 lines per channel
Remote control interfaces   standard: USB, LAN
    optional: Wirless LAN, IEEE-488 (GPIB)
General data
Dimensions (W × H × D)   222 × 97 × 436 mm
Weight   7.1 kg/7.3 kg
Rack installation   R&S®HZN96 option
*1) 10% to 90% load change within a band of ± 20 mV of set voltage.

Available options

General
Product Description
R&S®NGL-B105

R&S®NGL-B105

Order number 3652.6356.02

Description

IEEE-48 (GPIB) Interface

General
Product Description
R&S®NGL-K102

R&S®NGL-K102

Order number 3652.6362.02

Description

Wireless LAN remote control

R&S®NGL-K103

R&S®NGL-K103

Order number 3652.6385.02

Description

Digital trigger I/O

General accessories
Product Description

R&S®HZN96

Order number 3638.7813.02

Description

19'' rackmount kit, 2HU

Feature videos

Intuitive user interface

Intuitive user interface

The R&S®NGL200 Power Supply Series features a brilliant TFT 5’’ 800 x 480 Pixel WVGA capacitive touch screen with an intuitive user interface.

Optimized load recovery time with minimal overshoot

Optimized load recovery time with minimal overshoot

The R&S®NGL200 Power Supply Series features an exceptional fast load recovery time of < 30 µs with minimal overshoot. Perfect when testing IoT and battery powered devices or qualifying sensitive designs (e.g. semiconductors).

6 1/2 digits V/I metering

6 1/2 digits V/I metering

The R&S®NGL200 Power Supply Series features 6½ digits resolution in V/I metering, optimal for characterization of devices with low standby power consumption and high peak currents. Furthermore is can replace an additional DMM in many applications.

정보 요청

질문이나 추가 정보가 필요하십니까?이 양식에 맞춰 내용을 입력해 주시면 회신 드리겠습니다.

마케팅 동의

로데슈바르즈에서 다음과 같은 방법으로 정보를 수신하겠습니다

이것이 의미하는 바는 무엇입니까?

Rohde & Schwarz GmbH & Co. KG 및 본 웹사이트에서 명기하는 Rohde & Schwarz 법인 혹은 지사에서
테스트 및 계측, 보안 통신, 모니터링 및 네트워크 테스트, 방송 및 미디어, 사이버 보안 분야의 제품, 솔루션과 관련된 마케팅 및 광고 목적(예: 특별 행사 및 할인 프로모션에 대한 정보)을 위해 선택한 채널(이메일 또는 우편)을 통해 연락하는 데 동의합니다.

이용자의 권리

이 동의 선언은 news@rohde-schwarz.com에 "Unsubscribe"라는 제목으로 이메일을 보내 언제든지 취소할 수 있습니다. 또한 전송되는 각 이메일에 향후 이메일 광고에 대한 구독 취소 링크가 포함되어 있습니다. 개인 데이터 사용 및 해지 절차에 대한 자세한 내용은 "개인정보 보호정책"에 명시되어 있습니다.

감사합니다.

로데슈바르즈 팀 드림

오류가 발생했습니다. 잠시 뒤 다시 시도해 주십시오.
일반 정보 및 법정 정보

표시된 가격은 VAT가 포함되지 않은 제조사 권장 가격입니다. 표시된 가격과 제안은 기업 고객을 대상으로 하며, 개인 소비자를 대상으로 하지 않습니다.