R&S®ZVA-Zxxx millimeterwave converters

Network analysis up to 110 GHz

R&S®ZVA-Zxxx millimeterwave converters
라이트박스 열기
R&S®ZVA-Zxxx millimeterwave converters
라이트박스 열기
R&S®ZVA-Zxxx millimeterwave converters
라이트박스 열기
R&S®ZVA-Zxxx millimeterwave converters
라이트박스 열기
R&S®ZVA-Zxxx millimeterwave converters
라이트박스 열기
R&S®ZVA-Zxxx millimeterwave converters
라이트박스 열기
R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Front view R&S®ZVA-Zxxx millimeterwave converters, Side view R&S®ZVA-Zxxx millimeterwave converters, Back view R&S®ZVA-Zxxx millimeterwave converters, Application Image R&S®ZVA-Zxxx millimeterwave converters, 3D

주요 사항

  • Variable output power
  • Electronic power control
  • Automatic parameter setting
  • Convenient handling
  • Multiport and true differential measurements

Millimeterwave measurements in E and W bands

The R&S®ZVA-Zxx millimeter-wave converters can make millimeterwave measurements in the E and W band from 60 to 90GHz and 75 to 110GHz. Rohde & Schwarz converters have a wide dynamic range, are very convenient to operate and enable fast measurements. When combined with the R&S®ZVA, two-port measurements can be performed with a four-port network analyzer and two converters; with no need for an external generator. A two-port network analyzer requires an external generator for LO signals. The R&S®ZNA can have up to four converters connected with no external signal generator.

기능 및 장점

Frequency range

  • 60 GHz to 90 GHz (R&S®ZVA-Z90)
  • 75 GHz to 110 GHz (R&S®ZVA-Z110/R&S®ZVA-Z110E)
  • using an R&S®ZVA24/40/50/67 or an R&S®ZNA26/43/50/67 network analyzer

Wide dynamic range

  • R&S®ZVA-Z90: > 100 dB, typ. 115 dB
  • R&S®ZVA-Z110: > 100 dB, typ. 110 dB
  • R&S®ZVA-Z110E: > 95 dB, typ. 110 dB

Variable and electronic output power

typ. +10 dBm (R&S®ZVA-Z90)
typ. +10 dBm (R&S®ZVA-Z110)
typ. up to +2 dBm (R&S®ZVA-110E)
A control screw can reduce power by 40 dB (R&S®ZVA-Z110). The output power can be electronically reduced by 25 dB with the R&S®ZVA-Z110E. The R&S®ZVA-Z110 can reduce it by 70 dB with RF input power variation.

Automatic parameter setting

R&S®ZVA and R&S®ZNA firmware runs the converters with the R&S®ZVA-K8/R&S®ZNA-K8 converter control option. The network analyzer will automatically set the correct parameters based on the selected converter type. The network analyzer also protects converters by limiting output power to the converter coaxial inputs. For each converter band an appropriate calibration is available.

Convenient handling

The converter waveguide connectors are arranged on a bar extending from the converter for convenient usage. The screwed flange joints are easily accessible for calibration and connecting the DUT. The converters can have three or four height-adjustable feet. Three feet make it much easier to align the test port flange. The converters have no fans – a big advantage in particle-sensitive environments.

Multiport and true differential measurements

Multiport devices such as couplers can be analyzed with three or four converters. The setup can use an R&S®ZVA24, R&S®ZVA40, R&S®ZVA50 or R&S®ZVA67 plus an external generator and one converter per test port. The R&S®ZNA26, R&S®ZNA43, R&S®ZNA50 or R&S®ZNA67 enable up to four converters, which can be connected without needing an external signal generator. The R&S®ZVA-Z90/R&S®ZVA-Z110 and the R&S®ZVA-Z110E are ideal for generating true differential signals (true differential mode).

Pulsed measurements

The converters can also be operated in pulsed mode − to characterize pulsed amplifiers. This applies to both measurements versus frequency (average pulse and point-in-pulse) and pulse profile measurements.

사용 가능한 모델

사용 가능한 모델
모델
Upper frequency
Test port
Output power (typ.)

R&S®ZVA-Z90

주문 번호 1322.3024.02

Upper frequency
90 GHz
Test port
WR12
Output power (typ.)
+10 dBm

R&S®ZVA-Z110

주문 번호 1307.7000.02

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
+10 dBm

R&S®ZVA-Z110E

주문 번호 1307.7000.40

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-7 dBm

R&S®ZVA-Z110E

주문 번호 1307.7000.50

Upper frequency
110 GHz
Test port
WR10
Output power (typ.)
-1 dBm

사용 가능한 옵션

Waveguide calibration kits
산물
설명
R&S®ZV-WR12

주문 번호 1307.7700.10

설명

Waveguide calibration kit WR12, 60 GHz to 90 GHz (without sliding match)

R&S®ZV-WR12

주문 번호 1307.7700.11

설명

Waveguide calibration kit WR12, 60 GHz to 90 GHz (with sliding match)

R&S®ZV-WR10

주문 번호 1307.7100.10

설명

Waveguide calibration kit WR10, 75 GHz to 110 GHz (without sliding match)

R&S®ZV-WR10

주문 번호 1307.7100.11

설명

Waveguide calibration kit WR10, 75 GHz to 110 GHz (with sliding match)

General analysis
산물
설명

주문 번호 1332.5388.02

설명

Converter Control Software

(for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx)

주문 번호 1307.7022.02

설명

Freq. Converter Control

(for R&S®ZVA24/40/50/67)

General accessories
산물
설명
R&S®ZV-Z1118

주문 번호 1314.5373.00

설명

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®ZV-Z1218

주문 번호 1314.5380.00

설명

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®ZV-Z1227

주문 번호 1307.0886.02

설명

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZVAB-B44

주문 번호 1302.5544.02

설명

USB-to-IEC/IEEE adapter

(for control of external devices via IEC/IEEE bus)

R&S®ZCAK

주문 번호 1323.7746.24

설명

Adapter kit

including a power divider and two right angle SMA (m/m) adapters (required if R&S®ZVA24 var. 28 or R&S®ZVA40 var. 48 (VNAs with four sources) is used)

R&S®ZCAK

주문 번호 1323.7746.50

설명

Adapter kit

including four 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA50 is used)

R&S®ZCAK

주문 번호 1323.7746.67

설명

Adapter kit

including a power divider, two right angle SMA (m/m) adapters, three 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA67 is used)

Wrenches
산물
설명
R&S®ZV-Z1000

주문 번호 1314.5467.02

설명

Torque wrench for waveguide flange screws

R&S®ZCAW

주문 번호 1175.1960.00

설명

Angled wrench for waveguide flange screws

R&S®ZCTW

주문 번호 1175.2014.02

설명

Torque wrench for waveguide flange screws

R&S®ZCTW

주문 번호 1175.2014.03

설명

Torque wrench for waveguide flange screws

정보 요청

질문이 있거나 추가 정보가 필요하십니까? 이 양식에 맞춰 내용을 입력해 주시면 회신 드리겠습니다.

로데슈바르즈에서 다음과 같은 방법으로 정보를 수신하겠습니다

마케팅 동의

이것이 의미하는 바는 무엇입니까?

Rohde & Schwarz GmbH & Co. KG 및 본 웹사이트에서 명기하는 Rohde & Schwarz 법인 혹은 지사에서
테스트 및 계측, 보안 통신, 모니터링 및 네트워크 테스트, 방송 및 미디어, 사이버 보안 분야의 제품, 솔루션과 관련된 마케팅 및 광고 목적(예: 특별 행사 및 할인 프로모션에 대한 정보)을 위해 선택한 채널(이메일 또는 우편)을 통해 연락하는 데 동의합니다.

이용자의 권리

이 동의 선언은 news@rohde-schwarz.com에 "Unsubscribe"라는 제목으로 이메일을 보내 언제든지 취소할 수 있습니다. 또한 전송되는 각 이메일에 향후 이메일 광고에 대한 구독 취소 링크가 포함되어 있습니다. 개인 데이터 사용 및 해지 절차에 대한 자세한 내용은 "개인정보 보호정책"에 명시되어 있습니다.

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.