Centro de descargas

Provides the basic information required for remote control connections via SCPI.

English - 16 Jul 2025

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24 Dec 2017

Describes the concept and specific functions of the Real-Time Spectrogram application, including the remote control commands with programming examples.

English - 11 Sept 2025

This application note shows all necessary settings for performing Dual Receiver Measurement using the R&S®EMC32-K27 option via R&S® EMC32 Measurement Software.

English - 28 Sept 2017

Describes the specific functions of the application, as well as I/Q input interfaces, including the remote control commands with programming examples.

English - 11 Sept 2025

Describes the concept and specific functions of the real-time application, including the remote control commands with programming examples.

English - 11 Sept 2025

Describes the concept and specific functions of the Multi CISPR APD application, including the remote control commands with programming examples.

English - 11 Sept 2025

English - 14 Dec 2016

Railway rollling stock testing according to EN 50121-3-1 made easy with two receivers measureing in parallel. The R&S®EPL captures the magnetic field (150 kHz to 30 MHz) while at the same time the R&S®ESW captures the electric field (30 MHz to 1 GHz) - both in real-time, displaying the results in a spectrogram view. This not only enables fast measurements with a minimum of railway operation required, but also helps identifying all emission sources in detail.

English - 7 Nov 2025

English - 2 Feb 2026

Describes the types of memory and their usage in the R&S®ESW and issues when working in secured environments.

English - 21 Nov 2021

Describes the specific functions of the application, including the remote control commands with programming examples.

English - 11 Sept 2025

Provides the information required to prepare the instrument for use and start working.

English - 17 Sept 2025

English - 12 Aug 2016

The R&S®ESW-B8 and R&S®ESW-B8E extended bandwidth options allow the R&S®ESW EMI test receiver to measure with a resolution bandwidth of up to 80 MHz. The increasing number of wideband applications (e.g. radar sensors) and accompanying standards means there is now a greater interest in wide bandwidth measurements.This application note describes the following topics for the R&S®ESW EMI test receiver:► Characteristics and implementation of RF signal paths► Image responses and how their rejection is handled ► Ultrawideband measurement applications as required e.g. by ETSI standards► Solutions for efficiently coping with bandwidth limitations in the range above 8 GHz

English - 19 Nov 2020

Describes all instrument functions and remote control commands, including measurement and programming examples, for the base unit.

English - 11 Sept 2025

Describes the specific functions of the application including the remote control commands with programming examples.

English - 11 Sept 2025

Describes the concept and specific functions of the real-time application, including the remote control commands with programming examples.

English - 11 Sept 2025

This tool is intended to support on transferring transducer data from and to local files to the R&S receivers and the R&S®ELEKTRA software. It allows editing, creation and deletion remotely on the instrument or software and enables transferring transducer data between files of all common formats and the receiver/software. Many common CSV or TXT based exchange formats for calibration data were implemented so allow importing of those data to the instrument or R&S®ELEKTRA software. Support file formats are: csv (most common for data exchange), tdf (format used on the instruments), s1p and s2p (commonly used for network analysis) and txt.

English - 23 Mar 2026

With the wideband extension R&S®ESW-B1000, the R&S®ESW EMI test receiver allows never seen testing speed with up to 970 MHz of FFT bandwidth. External applications can now take advantage of the wide bandwidth. ESW firmware 3.20 adds a new method for exporting trace data from the instrument, regardless if the instrument is equipped with the wideband extension or not. SCPI commands allow live trace export of multiple traces simultaneously. This application note describes the use and applications of SCPI commands to request trace data of up to 4 traces simultaneously from the R&S®ESW receiver, even allowing CISPR detectors. The commands enable trace export while the instrument measures continuously and therefore theoretically enable infinite measurements.

English - 25 Jul 2024