Key Facts
- Dynamic range: –35 dBm to +20 dBm
- Frequency range: DC to 170 GHz
- Control and monitoring via USB and LAN (R&S®NRPxxTN only)
- Outstanding performance for reference applications
- Excellent impedance matching
Key Facts
The R&S®NRP power meter sensors have long been recognized for delivering supreme precision and speed. The R&S®NRPxxT, R&S®NRPxxTN and R&S®NRPxxTWG thermal power sensors are especially used for complex measurement tasks where highest accuracy counts. They unifiy excellent impedance matching with sophisticated connector concept. The internal calibration test grants reliable and stable measurements. The R&S®NRP power meter sensors are available as USB sensors and can be additionally controlled via LAN. This makes the R&S®NRP power meter portfolio ideal for use in production, R&D and calibration labs as well as for installation and maintenance tasks.
Quick Links
Unparalleled linearity ideal for performing relative measurements
Thermal power sensors are especially used for complex measurement tasks where highest accuracy counts. To improve measurement accuracy, the hardware of the R&S®NRPxxT(N)/TWG thermal power sensors is designed to reduce measurement noise to a minimum and to make the sensor immune to thermal environmental effects. Three times faster than comparable solutions on the market with triggered measurements and > 500 measurements/s in buffered mode.
High precision measurements R&S®NRP67T
From N to WR 6.5, always the right RF interface
To a large extent, measurement uncertainty results from multiple reflections at the source and power sensor caused by mismatch. To minimize these reflections, all thermal power sensors in the R&S®NRP family are excellently matched up to high frequencies, reducing measurement uncertainty.
R&S®NRPxxTWG power sensors
Remote monitoring via LAN over any distance
The LAN power sensors are ideal for remote monitoring applications, e.g. for satellite systems or particle accelerators, where sensors need to be placed at different points in the system. The LAN interface makes it easy to overcome large distances between the various test points and the control center.
Remote monitoring of LAN power sensors
Rohde & Schwarz has implemented a special verification function in the R&S®NRPxxT(N) sensors. This function covers all essential components of the signal path. Using a test routine, the sensor’s response to a highly stable applied DC power is measured and compared against the value stored during the previous calibration. The result provides information about the functionality and accuracy of the power sensor.
Test setup with R&S®NRP power sensors
Common R&S®NRP power sensor features
Features also available as three-path diode power sensors
Robust 6-/8-pole, USB or LAN
The power sensors come with various, detachable cables. A screw connection is provided on the sensor end to prevent accidental loosening of the cable. Direct connection to diverse Rohde & Schwarz signal generators and signal and spectrum analyzers enhances these instruments with a highperformance power meter. The R&S®NRP-ZKU or R&S®NRP-ZKC USB interface cable can be used to connect a power sensor to a laptop/PC via the USB interface.
R&S®NRP67TN and R&S®NRP67T thermal power sensors
Order Number 1419.0658.02
USB-A interface cable, length: 0.75 m
Order Number 1419.0658.03
USB-A interface cable, length: 1.5 m
Order Number 1419.0658.04
USB-A interface cable, length: 3 m
Order Number 1419.0658.05
USB-A interface cable, length: 5 m
Order Number 1425.2442.02
USB-C interface cable, length: 0.75 m
Order Number 1425.2442.03
USB-C interface cable, length: 1.5 m
Order Number 1425.2442.04
USB-C interface cable, length: 3.0 m
Order Number 1419.0664.02
6-pole interface cable, length: 1.5 m
Order Number 1419.0664.03
6-pole interface cable, length: 3 m
Order Number 1419.0664.04
6-pole interface cable, length: 5 m
Order Number 1424.9408.02
8-pole interface cable, length: 1.50 m
For connection to R&S®NRX
Order Number 1424.9408.03
8-pole interface cable, length: 3.00 m
For connection to R&S®NRX
Order Number 1424.9408.04
8-pole interface cable, length: 5.00 m
For connection to R&S®NRX
Order Number 1146.7740.02
USB sensor hub
R&S®NRP-Z5 can host up to 4 R&S®NRPxxS(N), R&S®NRPxxT(N), R&S®NRPxxA(N) or R&S®NRP-Z sensors. A professional trigger solution allows simultaneous internal and external triggering of all connected sensors.
Order Number 1175.2014.02
Torque wrench for waveguide flange screws
Order Number 1700.2141.02
Waveguide bracket for R&S®NRP110T
Order Number 3626.1044.02
Waveguide Coax Adapter, WR15 to 1 mm (f)
50 GHz to 75 GHz
Order Number 3626.1050.02
Waveguide Coax Adapter, WR12 to 1 mm (f)
60 GHz to 90 GHz
Order Number 3626.1067.02
Waveguide Coax Adapter, WR10 to 1 mm (f)
75 GHz to 110 GHz
Order Number 0240.2187.06
Documentation of calibration values
Order Number 1173.6506.02
Printout of DCV
Produtos relacionados
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz
1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).
2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.
3. A participação é gratuita e não depende da compra de mercadorias ou serviços.
4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.
5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:
Prêmio: 1 osciloscópio digital R&S®RTB2000
6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.
7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.
8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.
9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.
10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.
11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.
12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.
13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.