R&S®ZNBT Vector network analyzer

True multiport VNA

R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer
Open Lightbox
R&S®ZNBT Vector network analyzer, Front viewR&S®ZNBT Vector network analyzer, Front HighR&S®ZNBT Vector network analyzer, Side viewR&S®ZNBT Vector network analyzer, Back viewR&S®ZNBT Vector network analyzer, Back viewR&S®ZNBT Vector network analyzer, Application Image

Key Facts

  • Frequency range: 9 kHz to 8.5 GHz or 100 kHz to 20/26.5/40 GHz
  • Up to 24 ports with fully phase coherent receivers
  • Dynamic range of up to 140 dB
  • Short sweep times of 1.7 ms (R&S®ZNBT8) and 2.7 ms (other models)
  • 3-year warranty extension

Network analysis with up to 24 test ports

A true multiport vector network analyzer

The R&S®ZNBT is a multiport vector network analyzer offering up to 24 fully integrated test ports. The instrument can simultaneously test multiple DUTs or measure one DUT with up to 24 ports. The fully integrated test ports make the R&S®ZNBT a true multiport vector network analyzer, which includes a wide dynamic range, high output power levels and fast measurements. Frequency ranges up to 40 GHz are avalailable.

Caractéristiques & avantages

True multiport VNA

Platform for challenging multiport measurements

The R&S®ZNBT features one reflectometer per test port. The design eliminates the loss typically encountered in switch matrix based multiport systems. As a result, the R&S®ZNBT delivers a wide dynamic range, high output power, low trace noise, and excellent raw directivity and load match.

Open Lightbox

When speed counts

Short test times and various control interfaces

The instrument’s multiport architecture enables simultaneous measurements on all DUT ports. Data from all ports is captured synchronously and processed in parallel, significantly reducing sweep time compared to switch matrix based multiport systems. Digital interfaces help boost the speed of automatic test cycles to synchronize external components in a test setup. The handler I/O interface can be used to control an external parts handler.

Open Lightbox

Versatile options and FW features

Complex analysis of active and passive components

Enhanced performance modules with ever smaller dimensions require complex testing. The R&S®ZNBT offers a wide variety options and features:

  • More than 100 traces and channels for characterizing complex components
  • Wide range of embedding/deembedding options
  • Frequency-converting measurements on amplifiers and mixers
  • Time domain analysis with gating function and display of eye diagrams

Open Lightbox

Multiport calibration

Various calibration methods and devices

The R&S®ZNBT offers calibration methods for every application, including TOSM, TSM, TRL/LRL, UOSM and more. Together with a huge variety of calibration accessories ranging from manual calibration kits to automatic calibration units with up to 24 ports, all user calibration needs can be met.

R&S®ZN-Z154 automatic calibration unit with 24 ports
Open Lightbox

R&S®ZN-Z154 automatic calibration unit with 24 ports

Available models

Available models
Modèles
Ports
Frequency
Connectors
R&S®ZNBT8

R&S®ZNBT8

Numéro de commande 1318.7006.24

Ports
4 to 24
Frequency
9 kHz to 8.5 GHz
Connectors
N (f)
R&S®ZNBT20

R&S®ZNBT20

Numéro de commande 1332.9002.24

Ports
8 to 24
Frequency
100 kHz to 20 GHz
Connectors
3.5 mm (m)
R&S®ZNBT26

R&S®ZNBT26

Numéro de commande 1332.9002.34

Ports
8 to 24
Frequency
100 kHz to 26.5 GHz
Connectors
2.92 mm (m)
R&S®ZNBT40

R&S®ZNBT40

Numéro de commande 1332.9002.44

Ports
8 to 24
Frequency
100 kHz to 40 GHz
Connectors
2.92 mm (m)

Available options

Receiver step attenuators
Produit
Désignation
R&S®ZNBT8-B361

Numéro de commande 1319.4317.02

Désignation

Receiver step attenuators for ports 1 to 4 for the R&S®ZNBT8

R&S®ZNBT8-B362

Numéro de commande 1319.4323.02

Désignation

Receiver step attenuators for ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B363

Numéro de commande 1319.4330.02

Désignation

Receiver step attenuators for ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B364

Numéro de commande 1319.4346.02

Désignation

Receiver step attenuators for ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B365

Numéro de commande 1319.4352.02

Désignation

Receiver step attenuators for ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B366

Numéro de commande 1319.4369.02

Désignation

Receiver step attenuators for ports 21 to 24 for the R&S®ZNBT8

Extended power range
Produit
Désignation
R&S®ZNBT8-B21

Numéro de commande 1319.4252.02

Désignation

Extended power range for ports 1 to 4 for the R&S®ZNBT8

R&S®ZNBT8-B22

Numéro de commande 1319.4269.02

Désignation

Extended power range for ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B23

Numéro de commande 1319.4275.02

Désignation

Extended power range for ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B24

Numéro de commande 1319.4281.02

Désignation

Extended power range for ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B25

Numéro de commande 1319.4298.02

Désignation

Extended power range for ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B26

Numéro de commande 1319.4300.02

Désignation

Extended power range for ports 21 to 24 for the R&S®ZNBT8

R&S®ZNBT20-B21

Numéro de commande 1332.9348.02

Désignation

Extended power range for ports 1 to 4 for the R&S®ZNBT20

R&S®ZNBT20-B22

Numéro de commande 1332.9354.02

Désignation

Extended power range for ports 5 to 8 for the R&S®ZNBT20

R&S®ZNBT20-B23

Numéro de commande 1332.9360.02

Désignation

Extended power range for ports 9 to 12 for the R&S®ZNBT20

R&S®ZNBT20-B24

Numéro de commande 1332.9377.02

Désignation

Extended power range for ports 13 to 16 for the R&S®ZNBT20

R&S®ZNBT20-B25

Numéro de commande 1332.9383.02

Désignation

Extended power range for ports 17 to 20 for the R&S®ZNBT20

R&S®ZNBT20-B26

Numéro de commande 1332.9390.02

Désignation

Extended power range for ports 21 to 24 for the R&S®ZNBT20

R&S®ZNBT26-B21

Numéro de commande 1332.9348.34

Désignation

Extended power range for ports 1 to 4 for the R&S®ZNBT26

R&S®ZNBT26-B22

Numéro de commande 1332.9354.34

Désignation

Extended power range for ports 5 to 8 for the R&S®ZNBT26

R&S®ZNBT26-B23

Numéro de commande 1332.9360.34

Désignation

Extended power range for ports 9 to 12 for the R&S®ZNBT26

R&S®ZNBT26-B24

Numéro de commande 1332.9377.34

Désignation

Extended power range for ports 13 to 16 for the R&S®ZNBT26

R&S®ZNBT26-B25

Numéro de commande 1332.9383.34

Désignation

Extended power range for ports 17 to 20 for the R&S®ZNBT26

R&S®ZNBT26-B26

Numéro de commande 1332.9390.34

Désignation

Extended power range for ports 21 to 24 for the R&S®ZNBT26

R&S®ZNBT40-B21

Numéro de commande 1332.9348.44

Désignation

Extended power range for ports 1 to 4 for the R&S®ZNBT40

R&S®ZNBT40-B22

Numéro de commande 1332.9354.44

Désignation

Extended power range for ports 5 to 8 for the R&S®ZNBT40

R&S®ZNBT40-B23

Numéro de commande 1332.9360.44

Désignation

Extended power range for ports 9 to 12 for the R&S®ZNBT40

R&S®ZNBT40-B24

Numéro de commande 1332.9377.44

Désignation

Extended power range for ports 13 to 16 for the R&S®ZNBT40

R&S®ZNBT40-B25

Numéro de commande 1332.9383.44

Désignation

Extended power range for ports 17 to 20 for the R&S®ZNBT40

R&S®ZNBT40-B26

Numéro de commande 1332.9390.44

Désignation

Extended power range for ports 21 to 24 for the R&S®ZNBT40

Extended dynamic range
Produit
Désignation
R&S®ZNBT8-B504

Numéro de commande 1332.8335.02

Désignation

Extended dynamic range for ports 1 to 4 for the R&S®ZNBT8

R&S®ZNBT8-B508

Numéro de commande 1332.8341.02

Désignation

Extended dynamic range for ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B512

Numéro de commande 1332.8358.02

Désignation

Extended dynamic range for ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B516

Numéro de commande 1332.8364.02

Désignation

Extended dynamic range for ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B520

Numéro de commande 1332.8370.02

Désignation

Extended dynamic range for ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B524

Numéro de commande 1332.8387.02

Désignation

Extended dynamic range for ports 21 to 24 for the R&S®ZNBT8

Additional test ports
Produit
Désignation
R&S®ZNBT8-B108

Numéro de commande 1319.4200.02

Désignation

Additional ports 5 to 8 for the R&S®ZNBT8

R&S®ZNBT8-B112

Numéro de commande 1319.4217.02

Désignation

Additional ports 9 to 12 for the R&S®ZNBT8

R&S®ZNBT8-B116

Numéro de commande 1319.4223.02

Désignation

Additional ports 13 to 16 for the R&S®ZNBT8

R&S®ZNBT8-B120

Numéro de commande 1319.4230.02

Désignation

Additional ports 17 to 20 for the R&S®ZNBT8

R&S®ZNBT8-B124

Numéro de commande 1319.4246.02

Désignation

Additional ports 21 to 24 for the R&S®ZNBT8

R&S®ZNBT20-B112

Numéro de commande 1332.9454.02

Désignation

Additional ports 9 to 12 for the R&S®ZNBT20

R&S®ZNBT20-B116

Numéro de commande 1332.9460.02

Désignation

Additional ports 13 to 16 for the R&S®ZNBT20

R&S®ZNBT20-B120

Numéro de commande 1332.9302.02

Désignation

Additional ports 17 to 20 for the R&S®ZNBT20

R&S®ZNBT20-B124

Numéro de commande 1332.9319.02

Désignation

Additional ports 21 to 24 for the R&S®ZNBT20

R&S®ZNBT26-B112

Numéro de commande 1332.9454.34

Désignation

Additional ports 9 to 12 for the R&S®ZNBT26

R&S®ZNBT26-B116

Numéro de commande 1332.9460.34

Désignation

Additional ports 13 to 16 for the R&S®ZNBT26

R&S®ZNBT26-B120

Numéro de commande 1332.9302.34

Désignation

Additional ports 17 to 20 for the R&S®ZNBT26

R&S®ZNBT26-B124

Numéro de commande 1332.9319.34

Désignation

Additional ports 21 to 24 for the R&S®ZNBT26

R&S®ZNBT40-B112

Numéro de commande 1332.9454.44

Désignation

Additional ports 9 to 12 for the R&S®ZNBT40

R&S®ZNBT40-B116

Numéro de commande 1332.9460.44

Désignation

Additional ports 13 to 16 for the R&S®ZNBT40

R&S®ZNBT40-B120

Numéro de commande 1332.9302.44

Désignation

Additional ports 17 to 20 for the R&S®ZNBT40

R&S®ZNBT40-B124

Numéro de commande 1332.9319.44

Désignation

Additional ports 21 to 24 for the R&S®ZNBT40

Other
Produit
Désignation
R&S®ZNBT-B10

Numéro de commande 1332.9483.02

Désignation

GPIB interface

R&S®ZNBT-B12

Numéro de commande 1332.9490.02

Désignation

Device control

R&S®ZN-B121

Numéro de commande 1323.9290.00

Désignation

Direct control cable

R&S®ZNBT-B19

Numéro de commande 1332.9283.10

Désignation

Additional removable hard disk for R&S®ZNBT with LPW10

Windows Embedded Standard 7 (32 bit)

R&S®ZNBT-B19

Numéro de commande 1332.9283.11

Désignation

Additional removable hard disk for R&S®ZNBT with LPW11

Windows Embedded Standard 7 (64 bit)

R&S®ZNBT-B19

Numéro de commande 1332.9283.12

Désignation

Additional removable SSD for R&S®ZNBT with LPW11

Windows 10 IoT Enterprise 2016 LTSB (64 bit)

R&S®ZNBT-B19

Numéro de commande 1332.9283.13

Désignation

Additional removable SSD for R&S®ZNBT with LPW11

Windows 10 IoT Enterprise 2021 LTSC (64 bit)

R&S®ZNBT-B4

Numéro de commande 1332.9477.02

Désignation

Precision frequency reference

R&S®ZNBT-B81

Numéro de commande 1332.9502.02

Désignation

DC inputs

R&S®ZNBT-USY

Numéro de commande 1328.8857.02

Désignation

Synthesizer upgrade for the R&S®ZNBT

 

R&S®ZNBT-U10

Numéro de commande 1338.1661.02

Désignation

Upgrade Kit from Win7 to Win10 for R&S®ZNBT

R&S®ZNBT-U11

Numéro de commande 1332.8429.02

Désignation

Upgrade Kit for R&S®ZNBT with LPW10 CPU to LPW11 includes Upgrade from Win7 to Win10 and SSD

R&S®ZZA-KN5

Numéro de commande 1175.3040.00

Désignation

19" Rack Adapter

R&S®ZN-Z15

Numéro de commande 1325.5905.02

Désignation

External RFFE GPIO Interface (MIPI)
Includes one R&S®ZN-Z25 interface cable adapters

R&S®ZN-Z15

Numéro de commande 1325.5905.03

Désignation

External RFFE GPIO Interface (MIPI)
Including voltage and current measurements and includes one R&S®ZN-Z25 interface cable adapters

R&S®ZNBT-Z14

Numéro de commande 1326.6640.05

Désignation

External handler I/O interface

R&S®ZN-Z25

Numéro de commande 1334.3424.02

Désignation

Additional Interface Cable for R&S®ZN-Z15 RFFE GPIO Interface

(including adapters)

Software options
Produit
Désignation

Numéro de commande 1318.8425.02

Désignation

Time domain analysis (TDR)

R&S®ZNBT-K20

Numéro de commande 1319.4400.02

Désignation

Extended time domain analysis with eye diagram

R&S®ZNBT-K3

Numéro de commande 1350.5063.02

Désignation

Distance-to-fault (DTF)

Numéro de commande 1318.8431.02

Désignation

Frequency conversion

R&S®ZNBT-K14

Numéro de commande 1318.8448.02

Désignation

Intermodulation measurements
 

requires R&S®ZNBT-K4

R&S®ZNBT-K17

Numéro de commande 1318.8454.02

Désignation

10 MHz receiver bandwidth

R&S®ZNBT-K19

Numéro de commande 1319.4000.02

Désignation

1 mHz Frequency Resolution

R&S®ZNBT-K210

Numéro de commande 1328.8634.02

Désignation

EAZY De-embedding (EZD) based on IEEE 370

for R&S®ZNBT

R&S®ZNBT-K220

Numéro de commande 1328.8640.02

Désignation

In-Situ De-embedding (ISD) that covers IEEE 370

for R&S®ZNBT

R&S®ZNBT-K230

Numéro de commande 1328.8657.02

Désignation

Smart Fixture De-embedding (SFD)

for R&S®ZNBT

R&S®ZNBT-K231

Numéro de commande 1328.8663.02

Désignation

Delta-L 4.0 PCB characterization

for R&S®ZNBT

R&S®ZNBT-K980

Numéro de commande 1338.8989.02

Désignation

HUMS software option

Health and utilization monitoring service for R&S®ZNBT

R&S®ZN-ZTW torque wrenches
Produit
Désignation
R&S®ZN-ZTW

Numéro de commande 1328.8534.10

Désignation

Torque Wrench, 0.45 Nm

for 1.0 mm connectors, 6 mm width across flats

R&S®ZN-ZTW

Numéro de commande 1328.8534.11

Désignation

Torque Wrench, 0.23 Nm coupling torque

for 1.0 mm connectors with 6 mm width across flats

R&S®ZN-ZTW

Numéro de commande 1328.8534.12

Désignation

Torque Wrench, 0.34 Nm

for 1.0 mm connectors, 6 mm width across flats

R&S®ZN-ZTW

Numéro de commande 1328.8534.19

Désignation

Torque Wrench, 0.9 Nm

R&S®ZN-ZTW

Numéro de commande 1328.8534.35

Désignation

Torque Wrench

Torque Wrench for 3.5/2.92/2.4/1.85 mm connectors with 8 mm width across flats, 0.9 Nm coupling torque 

R&S®ZN-ZTW

Numéro de commande 1328.8534.71

Désignation

Torque Wrench, 1.5 Nm

for type N connectors, 20 mm width across flats

Attenuators and limiters
Produit
Désignation
R&S®DNF

Numéro de commande 0272.4010.50

Désignation

Attenuator

0 Hz to 12.4 GHz, m/f 3 dB, 2 W

R&S®DNF

Numéro de commande 0272.4110.50

Désignation

Attenuator

0 Hz to 12.4 GHz, m/f 6 dB, 2 W

R&S®DNF

Numéro de commande 0272.4210.50

Désignation

Attenuator

0 Hz to 12.4 GHz, m/f 10 dB, 1 W

R&S®RBU50

Numéro de commande 1073.8695.03

Désignation

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®DNF

Numéro de commande 0272.4310.50

Désignation

Attenuator

0 Hz to 12.4 GHz, m/f 20 dB, 1 W

R&S®RBU50

Numéro de commande 1073.8695.06

Désignation

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Numéro de commande 1073.8695.20

Désignation

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Numéro de commande 1073.8695.10

Désignation

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU50

Numéro de commande 1073.8695.30

Désignation

High-Power Attenuator, 50 W

0 Hz to 2 GHz

R&S®RBU100

Numéro de commande 1073.8495.03

Désignation

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Numéro de commande 1073.8495.06

Désignation

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Numéro de commande 1073.8495.10

Désignation

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Numéro de commande 1073.8495.20

Désignation

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RBU100

Numéro de commande 1073.8495.30

Désignation

High-Power Attenuator, 100 W

0 Hz to 2 GHz

R&S®RDL50

Numéro de commande 1035.1700.52

Désignation

High-Power Attenuator, 50W

0 Hz to 6 GHz, 20 dB

R&S®ZN-B13

Numéro de commande 1303.7840.02

Désignation

50 Ohm broadband limiter

Terminations and matching pads
Produit
Désignation
R&S®RNB

Numéro de commande 0272.4910.50

Désignation

Termination, 50 Ω

1 W, DC to 4 GHz, N (m)

R&S®RNA

Numéro de commande 0272.4510.50

Désignation

Precision Termination, 75 Ω

1 W, DC to 3 GHz, N (m)

R&S®RAU

Numéro de commande 0200.0019.55

Désignation

UHF Termination , 50 Ω

0 Hz to 2 GHz, 100 W, N (f)

R&S®RAD

Numéro de commande 0289.8966.00

Désignation

Feedthrough Termination, 50 Ω

0.5 W, DC to 1 GHz, BNC (m/f)

R&S®RAD50

Numéro de commande 0844.9352.02

Désignation

Feedthrough Termination, 50 Ω

2 W, DC to 500 MHz, BNC (m/f)

R&S®RAM

Numéro de commande 0358.5414.02

Désignation

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

R&S®RAZ

Numéro de commande 0358.5714.02

Désignation

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®RAZ

Numéro de commande 0358.5714.03

Désignation

Matching Pad 50/75 Ω, series resistor 25 Ω

0 Hz to 3.3 GHz

Bridges, power splitters and junction boxes
Produit
Désignation
R&S®RVZ

Numéro de commande 0800.6612.52

Désignation

Power Splitter, 2x 50 Ω

0 Hz to 2.7 GHz

R&S®ZV-Z1227

Numéro de commande 1307.0886.02

Désignation

2-way Wilkinson power divider

4 GHz to 27 GHz

R&S®ZV-Z1228

Numéro de commande 3626.4937.02

Désignation

Pulsar 4-way power divider, 5 GHz to 27 GHz

5 GHz to 27 GHz

Adapters
Produit
Désignation
R&S®ZV-Z1218

Numéro de commande 1314.5380.00

Désignation

Adapter SMA m/f angle

0 Hz to 18 GHz

R&S®ZV-Z1118

Numéro de commande 1314.5373.00

Désignation

Adapter SMA m/m angle

0 Hz to 18 GHz

R&S®WCA70

Numéro de commande 1324.5001.02

Désignation

Waveguide Coax Adapter, WR15 to 1.85 mm (male)
50 GHz to 75 GHz

R&S®WCA75

Numéro de commande 3592.6727.02

Désignation

Waveguide coax adapter, WR15 to 1 mm (m)

R&S®WCA75

Numéro de commande 3592.6733.02

Désignation

Waveguide Coax Adapter, WR15 to 1mm(f)

R&S®WCA75

Numéro de commande 3626.1044.02

Désignation

Waveguide Coax Adapter, WR15 to 1 mm (f)

50 GHz to 75 GHz

R&S®WCA75

Numéro de commande 3626.1044.03

Désignation

Waveguide Coax Adapter, WR15 to 1 mm (m)

50 GHz to 75 GHz

R&S®WCA90

Numéro de commande 3626.1050.02

Désignation

Waveguide Coax Adapter, WR12 to 1 mm (f)

60 GHz to 90 GHz

R&S®WCA90

Numéro de commande 3626.1050.03

Désignation

Waveguide Coax Adapter, WR12 to 1 mm (m)

60 GHz to 90 GHz

R&S®WCA110

Numéro de commande 3626.1067.02

Désignation

Waveguide Coax Adapter, WR10 to 1 mm (f)

75 GHz to 110 GHz

R&S®WCA110

Numéro de commande 3626.1067.03

Désignation

Waveguide Coax Adapter, WR10 to 1 mm (m)

75 GHz to 110 GHz

Related videos

R&S®ZNB : des performances solides pour les applications générales

Une tâche de mesure typique est présentée, ainsi que la manière dont elle peut être facilement réalisée avec les analyseurs de réseaux vectoriels R&S®ZNB. L'analyseur de réseaux vectoriels R&S®ZNB propose de solides performances RF pour les besoins quotidiens.

mai 07, 2021

Logiciel de de-embedding intégré

Pour une précision maximale lors de la caractérisation de divers composants sur des montages, le R&S®ZNB dispose de plusieurs outils standards de de-embedding intégrés dans le R&S®ZNB Firmware

mai 07, 2021

Concept de fonctionnement multi-touch

La capacité multi-touch (tactile multipoint) du R&S®ZNB assure une utilisation fluide et simple de l'instrument.

mai 07, 2021

Fonctionnement unique basé sur le dispositif sous test

Le R&S®ZNB propose un concept de fonctionnement unique basé sur le dispositif sous test. Cela place le dispositif sous test avec ses caractéristiques au centre de la mesure et vous aide dans la configuration de celle-ci.

mai 07, 2021

Diverses options de mesure

L'analyseur de réseaux vectoriels R&S®ZNB propose un grand nombre d'options de mesure.

mai 07, 2021

Des performances solides pour les applications d'usage général

L'analyseur de réseaux vectoriels R&S®ZNB propose de solides performances RF pour répondre à vos besoins quotidiens.

mai 07, 2021

Analyse du diagramme de l’œil avec le R&S®ZNB : comment configurer les mesures

L'option R&S®ZNB-K20 permet d'afficher des diagrammes de l’œil sur les analyseurs de réseaux vectoriels R&S®ZNB et R&S®ZNBT de Rohde & Schwarz.

mai 21, 2019

Analyse du diagramme de l’œil avec le R&S®ZNB : introduction

Les analyseurs de réseaux vectoriels R&S®ZNB et R&S®ZNBT de Rohde & Schwarz prennent désormais en charge les diagrammes de l’œil.

mai 21, 2019

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing de permission

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.
Informations générales et conditions d'utilisation du site Web

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

Prix : 1x oscilloscope numérique R&S®RTB2000

6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.