Búsqueda

The external Frontend control software enables the operation of the external Frontends R&S FExx on the R&S RTP oscilloscope.

The R&S®RTP-K114 and R&S®RTP-K115 options enable DP 1.4b and eDP 1.4a/1.5 compliance testing on R&S®RTP oscilloscopes.

The R&S®RTP-K140/141 options enable the high-speed serial pattern trigger function with a maximum nominal data rate of 8 Gbps or 16 Gbps. More info.

The TDR/TDT software option creates a time domain reflection (TDR) and time domain transmission (TDT) analysis system for R&S®RTO or RTP oscilloscopes. Explore now!

R&S®RTP high performance series oscilloscopes benefit from highly accurate measurements, unprecedented speed and a compact form factor. More information.

The Rohde & Schwarz options support signal integrity debugging and automated compliance testing of DDR5/ LPDDR5, DDR4/ LPDDR4 and DDR3/ DDR3L/ LPDDR3 interfaces. Learn more.

The R&S spectrum analysis oscilloscope software enhances the multichannel spectrum analysis capabilities of R&S oscilloscopes. Explore now!

The option R&S RTP-K110 enables HDMI 1.4b/2.1 compliance testing on the R&S RTP oscilloscopes.

The R&S®RTP and RTO oscilloscopes supports triggering and decoding of USB 3.1 Gen 1 and Gen 2 signals. Explore the USB 3.1 triggering & decoding software here.

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of Automotive Ethernet BroadR-Reach or 100BASE-T1. Explore the features now.

Rohde & Schwarz launches its novel wideband modulated load pull solution based on the R&S RTP oscilloscope. It offers an extension to traditional vector network analyzer (VNA)-based solutions for non-linear device characterization by enabling load pull with wideband modulated signals to support RF components development for next-generation wireless technologies.

20 Jan 2025 | Comunicado de prensa | Test & measurement

K135 enables PAM-N Analysis for teh RTO and RTP Oscilloscopes.

The high definition (HD) mode increases the vertical resolution of the R&S®RTE, R&S®RTO and R&S®RTP oscilloscopes to up to 16-bit. Benefit from precise analysis results!

R&S®RTP, RTO and RTE oscilloscopes support decoding of 10BASE-T and 100BASE-TX Ethernet. Explore the Ethernet decoding software here.

The R&S®RTP, R&S®RTO and R&S®RTE oscilloscopes support triggering and decoding of SpaceWire data and communications buses. Explore the SpaceWire triggering and decoding software.

The R&S®RTP, R&S®RTO and R&S®RTE oscilloscopes support all data rates: high speed, full speed and low speed. Explore the triggering & decoding software here.

The arbitrary waveform generator option R&S®B6 enhance R&S oscilloscopes with a fully integrated arbitrary waveform and pattern generator. More information.

R&S®RTP and RTO oscilloscopes support decoding of 10BASE-T and 100BASE-TX Ethernet, as well as MDIO. Find out more about the decoding software here.

Triggering and decoding of various MIPI highspeed signals (incl. D-PHY and M-PHY) on Rohde & Schwarz RTO and RTP oscilloscopes: Decoding using intuitive menu dialogs, detailed analysis, color-coded protocol fields, table display, etc.. Trigger on errors and other protocol-specific fields.

R&S®RTO2000,; R&S®RTO6 and R&S®RTP oscilloscopes support triggering and decoding of PCI Express Gen 1.1 and 2.0 signals. Explore the PCIe 1.1/2.0 triggering and decoding software.

Choose the R&S Manchester and NRZ oscilloscope software to trigger & decode any Manchester and NRZ coded serial protocol. Explore the features now.

The option R&S®RTP-K98 enables to perform wideband load-pull measurements with a setup based on R&S®RTP oscilloscope and R&S®SMW200A.

The USB-IF has approved the USB 3.2 compliance test solution from Rohde & Schwarz, confirming that it meets the stringent requirements set by the standardization body. Manufacturers of USB devices can have full confidence in the accuracy and reliability of the test results produced by the test solution.

5 Jun 2024 | Comunicado de prensa | Test & measurement

Many R&S oscilloscopes support triggering and decoding of ARINC 429 buses. Explore the ARINC triggering & decoding oscilloscope software here.

Many R&S oscilloscopes support triggering and decoding of MIL-STD-1553 buses. Explore the supported scopes and learn about MIL-1553 software here.

R&S®RTO and RTP oscilloscopes support decoding and triggering of 100BASE-T1 and 1000BASE-T1 automotive ethernet buses. The MXO series support 10Base-T1S and 100Base-T1. Find out more about the decoding software here.

R&S®RTO and R&S®RTP oscilloscopes support triggering and decoding of the MIPI RFFE protocol. Learn more about the MIPI RFFE oscilloscope software here.

R&S®MXO Series family, R&S®RTP and R&S®RTO6 oscilloscopes support decoding and triggering of aerospace protocols such as MIL-STD-1553, ARINC 429, SpaceWire. Find out more about the software package here.

Triggering and decoding of various USB signals (incl. USB 1.1/2.0/3.2/PD/SSIC) on Rohde & Schwarz RTO and RTP oscilloscopes: Decoding using intuitive menu dialogs, detailed analysis, color-coded protocol fields, table display, etc.. Trigger on errors and other protocol-specific fields.

Explore las soluciones para realizar pruebas completas de memorias DDR de Rohde & Schwarz a fin de probar la integridad de señal y su conformidad en todas las generaciones de la tecnología DDR.