The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

Aproveche al máximo sus tareas de prueba y medición en la banda de alta frecuencia con los convertidores versátiles de ondas milimétricas de Rohde & Schwarz.

Rohde & Schwarz ofrece una amplia gama de analizadores de redes vectoriales versátiles y de accesorios con excelentes características.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Noise figure measurement with vector network analyzers

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

This document provides the technical specifications of the R&S®ZNA67EXT vector network analyzer system.

This document is an addendum to the "Options" section of the R&S®ZNA specifications (PD 5215.4652.22). It provides the technical specifications of the the following R&S®ZNA options: R&S®ZNA26-B10, R&S®ZNA43-B10, R&S®ZNA50-B10, R&S®ZNA67-B10.

Aprenda sobre la diferencia entre medidores LCR y analizadores de redes vectoriales (VNA). Aprenda a medir la impedancia con un analizador de redes y cómo funciona la medición de impedancia con un medidor LCR.

Millimeterwave mini receiver module for antenna test systems, consisting of a harmonic mixer as downconverter, a booster amplifier for controlled input power and a low noise amplifier for the IF signal.

Millimeterwave receiver modules for antenna test systems with highest dynamic range.

The R&S®ZCxxx millimeterwave converters allow millimeterwave measurements in the frequency range up to 1.1 THz.

Switch matrix - configurable switch matrix for up to 48 network analyzer ports, up to 26.5 GHz.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

Verification kits are used to perform uncertainty evaluations of vector network analyzers. Option R&S®ZNA-K50(P) provides additional uncertainty analysis.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

Calibration accessories for frequency converting measurements, Wide band application

A computer simulation for the R&S®ZNA, R&S®ZNB, R&S®ZNBT and R&S®ZND that can be used to test a remote control program without the need for any VNA hardware.

R&S®ZVA-Zxxx millimeterwave converters have a wide dynamic range. Rohde & Schwarz converters are very convenient to operate and enable fast measurements.

R&S®RF Ports Alignment Software - Tailored solution for calibrating amplitude, time and phase of multi-channel SMW200A setups.

R&S®ZN-Z2xx: high-end manual calibration kits, male and female standards, up to 110 GHz, S-parameter based characterization.

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

Con una interfaz de usuario intuitiva de alta precisión y bandas de incertidumbre mostradas de manera directa en la pantalla, el R&S®ZNA lleva la precisión a un nuevo nivel.

jul 19, 2021

El analizador de redes vectoriales R&S®ZNA con opción integrada de salida de oscilador local y de entrada de frecuencia intermedia directa es una solución sencilla y económica para mediciones de 2 y 4 puertos con convertidores de ondas milimétricas de Rohde & Schwarz.

jul 19, 2021

El analizador de redes vectoriales R&S®ZNA con opción integrada de salida de oscilador local y de entrada de frecuencia intermedia directa es una solución sencilla y económica para mediciones de 2 y 4 puertos con convertidores de ondas milimétricas de Rohde & Schwarz.

abr 27, 2023

El analizador de redes vectoriales R&S®ZNA ofrece un rango dinámico y abre la puerta a potenciales aplicaciones antes impensables con un analizador de redes vectoriales.

ene 07, 2019