|
Application in the R&S®TSVP platform
|
R&S®CompactTSVP or R&S®PowerTSVP |
two slots on front |
| Interface |
| Control bus |
|
CAN 2.0b (1 Mbit/s) |
| DUT connector (front) |
R&S®PSM3B high-power switching module |
none |
| |
R&S®PSM3 high-power switching module with VPC connector bracket |
TriPaddle signal/mini power module, receiver, 16/16 positions (Virginia Panel Corporation) contacts: - mini power, receiver, 12 to 14 AWG, 50 μ gold
- signal, receiver, TriPaddle, 7 AMP, 20 to 24 AWG, 30 μ gold
|
| Rear I/O connector |
CompactPCI |
110 pins |
| |
Power |
2 × 12 pins |
|
Channel switching characteristics
|
|
High-power channels 1)
|
| Relay type |
|
Zettler AZ2150 |
| Switching voltage |
DC |
30 V (max.) |
| |
AC (peak) |
46 V (max.) |
| Switching current |
|
30 A (max.) |
| Switching power |
DC |
900 W (max.) |
| |
AC |
990 VA |
| Operate/release time |
|
< 8 ms (typ.) |
|
Short path high-power channels 1)
|
| Relay type |
|
Zettler AZ987 |
| Switching voltage |
DC |
16 V (max.) |
| Switching current |
DC |
30 A (max.) |
| Switching power |
DC |
480 W (max.) |
| Operate/release time |
|
< 4 ms (typ.) |
|
Medium-power channels
|
| Relay type |
|
AxiCom IM03 |
| Switching voltage |
DC |
30 V (max.) |
| |
AC (peak) |
46 V (max.) |
| Switching current |
|
2 A (max.) |
| Switching power |
DC |
60 W (max.) |
| |
AC |
62.5 VA (max.) |
| Operate/release time |
|
< 6 ms (typ.) |
|
Analog measurement bus access and coupling relays
|
| Switching voltage |
DC |
30 V (max.) |
| |
AC (peak) |
46 V (max.) |
| Switching current |
|
1 A (max.) |
| Switching power |
DC |
10 W (max.) |
| |
AC |
10 VA (max.) |
| Operate/release time |
|
< 0.5 ms (typ.) |
|
Conditions
|
| Temperature range |
|
+23 °C ±5 °C |
| Additional error specified by the temperature coefficient in the range |
|
+5 °C to +18 °C and +28 °C to +40 °C |
| Warm-up |
|
30 minutes |
| Shunt resistor (low power channels) |
| Nominal value |
|
22 mΩ |
| Accuracy |
correction values included, measured by R&S®PSAM |
±(1 % + 4 mA) |
| Temperature coefficient |
|
±75 ppm/K |
| I-to-V converter (high-power channels) |
| Type |
|
LEM CAS 15 |
| Conversion factor |
|
41.67 mV/A (nom.) |
| Accuracy |
correction values included, measured by R&S®PSAM |
±(1 % + 60 mA) |
| Temperature coefficient |
|
±40 ppm/K |
|
General data
|
| Power consumption |
reset state |
5 V/0.35 A |
| |
all CHx relays activated, one channel connected to analog bus |
5 V/2 A |
| Environmental conditions |
| Temperature |
operating temperature range |
+5 °C to +40 °C |
| |
storage temperature range |
–10 °C to +60 °C |
| Damp heat |
|
+40 °C, 80 % rel. humidity, steady state in line with EN 60068-2-30 |
| Mechanical resistance |
| Vibration |
sinusoidal |
5 Hz to 55 Hz, 0.15 mm amplitude const.,
55 Hz to 150 Hz, 0.5 g const.,
in line with EN 60068-2-6 |
| |
random |
10 Hz to 300 Hz, acceleration 1.2 g (RMS),
in line with EN 60068-2-64 |
| Shock |
|
40 g shock spectrum, in line with MIL-STD-810E,
method 516.4, procedure I |
| Product conformity |
| Electromagnetic compatibility |
EU: in line with EMC Directive 2004/108/EC |
applied harmonized standards:
EN 61326-1 (industrial environment),
EN 61326-2-1,
EN 55011 (class A),
EN 61000-3-2,
EN 61000-3-3 |
| Electrical safety |
EU: in line with
Low Voltage Directive 2006/95/EC |
applied harmonized standard: EN 61010-1 |
| Dimensions (W × H × D) |
R&S®PSM3 model .02 |
40 mm × 174 mm × 316 mm (1.58 in × 6.85 in × 12.44 in) |
| |
R&S®PRIO3 |
40 mm × 130 mm × 180 mm (1.58 in × 5.12 in × 7.09 in) |
| Weight |
R&S®PSM3 model .02 |
1042 g (2.30 lb) |
| |
R&S®PSM3 model .03 |
1402 g (3.09 lb) |
| |
R&S®PRIO3 |
328 g (0.72 lb) |
| Calibration interval |
recommended for highest accuracy |
24 months |
