R&S®TS-PSM3 High-Power Switching Module

Automotive DUT supplyand load switching up to 30 A

  • Обзор

Key Facts

  • 8 high-power channels for currents up to 30 A
  • 8 medium-power channels for currents up to 2 A
  • Switching voltage up to 30 V

Brief Description

The R&S®PSM3 is the innovative implementation of a rugged, modular switching device to make high current switching an intrinsic part of your test system.

Specifications

Interface
Control bus CAN 2.0b (1 Mbit/s)
Rear I/O connector CompactPCI, 110 pins

Key Facts

  • 8 high-power channels for currents up to 30 A
  • 8 medium-power channels for currents up to 2 A
  • Switching voltage up to 30 V
  • Integrated current measurement via current sensors and analog bus coupling
  • Rear I/O access to the power signals for unique flexibility during system integration and seamless adaptation to power supplies and loads within a system paradigm based on R&S®PowerTSVP
  • Unique comprehensive selftest and measurement of relay contact resistance
  • Support by signal routing library (R&S®TS-LSRL) provides intelligent and secure switch path computing

Brief Description

The R&S®PSM3 is the innovative implementation of a rugged, modular switching device to make high current switching an intrinsic part of your test system.

The R&S®PSM3 high-power switching module was developed to add high current switching up to 30 amps to the standard functionality of the test system versatile platform (R&S®TSVP).

Powerful and flexible switching capabilities are combined with ruggedized signal connection and high availability secured by switching cycle monitoring. TheR&S®PSM3 can be used in both the R&S®CompactTSVP (R&S®PCA3) and the R&S®PowerTSVP (R&S®PWA3).

Specifications

Specifications
Application in the R&S®TSVP platform R&S®CompactTSVP or R&S®PowerTSVP two slots on front
Interface
Control bus CAN 2.0b (1 Mbit/s)
DUT connector (front) R&S®PSM3B high-power switching module none
R&S®PSM3 high-power switching module with VPC connector bracket TriPaddle signal/mini power module, receiver, 16/16 positions (Virginia Panel Corporation) contacts:
  • mini power, receiver, 12 to 14 AWG, 50 μ gold
  • signal, receiver, TriPaddle, 7 AMP, 20 to 24 AWG, 30 μ gold
Rear I/O connector CompactPCI 110 pins
Power 2 × 12 pins
Channel switching characteristics
High-power channels 1)
Relay type Zettler AZ2150
Switching voltage DC 30 V (max.)
AC (peak) 46 V (max.)
Switching current 30 A (max.)
Switching power DC 900 W (max.)
AC 990 VA
Operate/release time < 8 ms (typ.)
Short path high-power channels 1)
Relay type Zettler AZ987
Switching voltage DC 16 V (max.)
Switching current DC 30 A (max.)
Switching power DC 480 W (max.)
Operate/release time < 4 ms (typ.)
Medium-power channels
Relay type AxiCom IM03
Switching voltage DC 30 V (max.)
AC (peak) 46 V (max.)
Switching current 2 A (max.)
Switching power DC 60 W (max.)
AC 62.5 VA (max.)
Operate/release time < 6 ms (typ.)
Analog measurement bus access and coupling relays
Switching voltage DC 30 V (max.)
AC (peak) 46 V (max.)
Switching current 1 A (max.)
Switching power DC 10 W (max.)
AC 10 VA (max.)
Operate/release time < 0.5 ms (typ.)
Conditions
Temperature range +23 °C ±5 °C
Additional error specified by the temperature coefficient in the range +5 °C to +18 °C and +28 °C to +40 °C
Warm-up 30 minutes
Shunt resistor (low power channels)
Nominal value 22 mΩ
Accuracy correction values included, measured by R&S®PSAM ±(1 % + 4 mA)
Temperature coefficient ±75 ppm/K
I-to-V converter (high-power channels)
Type LEM CAS 15
Conversion factor 41.67 mV/A (nom.)
Accuracy correction values included, measured by R&S®PSAM ±(1 % + 60 mA)
Temperature coefficient ±40 ppm/K
General data
Power consumption reset state 5 V/0.35 A
all CHx relays activated, one channel connected to analog bus 5 V/2 A
Environmental conditions
Temperature operating temperature range +5 °C to +40 °C
storage temperature range –10 °C to +60 °C
Damp heat +40 °C, 80 % rel. humidity, steady state in line with EN 60068-2-30
Mechanical resistance
Vibration sinusoidal 5 Hz to 55 Hz, 0.15 mm amplitude const.,
55 Hz to 150 Hz, 0.5 g const.,
in line with EN 60068-2-6
random 10 Hz to 300 Hz, acceleration 1.2 g (RMS),
in line with EN 60068-2-64
Shock 40 g shock spectrum, in line with MIL-STD-810E,
method 516.4, procedure I
Product conformity
Electromagnetic compatibility EU: in line with EMC Directive 2004/108/EC applied harmonized standards:
EN 61326-1 (industrial environment),
EN 61326-2-1,
EN 55011 (class A),
EN 61000-3-2,
EN 61000-3-3
Electrical safety EU: in line with
Low Voltage Directive 2006/95/EC
applied harmonized standard: EN 61010-1
Dimensions (W × H × D) R&S®PSM3 model .02 40 mm × 174 mm × 316 mm (1.58 in × 6.85 in × 12.44 in)
R&S®PRIO3 40 mm × 130 mm × 180 mm (1.58 in × 5.12 in × 7.09 in)
Weight R&S®PSM3 model .02 1042 g (2.30 lb)
R&S®PSM3 model .03 1402 g (3.09 lb)
R&S®PRIO3 328 g (0.72 lb)
Calibration interval recommended for highest accuracy 24 months
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Получить на тест

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.

Укажите свою страну.
Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Do not enter data in this field
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Узнать цену

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.
Введите номер телефона.

Укажите свою страну.
Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Do not enter data in this field
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Запросить информацию

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.

Укажите свою страну.
Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Do not enter data in this field
International Website