5 Ergebnisse
R&S®VISA ist eine standardisierte Softwarebibliothek für die schnelle Kommunikation über zahlreiche Schnittstellen mit einer Vielzahl von T&M-Instrumenten, die von PC-Applikationen aus im Netzwerk erkannt werden können. R&S®VISA enthält auch ein Trace Tool, das gleichzeitig die Kommunikation zwischen mehreren Anwendungen und T&M-Instrumenten überwacht und unter Verwendung effizienter Filter eine gezielte Analyse erlaubt.
26.05.2020 | AN-Nr. 1DC02
The R&S®TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface. The individual transport streams result in a high overall bit rate. To make the streams available on a standard PC, the R&S®TSStream software does not play the transport stream files directly from the hard disk but first loads them into the RAM. The maximum number and length of the transport streams depends solely on the PC's available RAM.
16.03.2017 | AN-Nr. 1GP113
The need for higher data rates and flexibility for IP and Cable TV (CATV) has led to the introduction of DOCSIS®3.1. With channel bandwidths up to 192 MHz and 96 MHz on the downstream and upstream respectively as well as the cable network frequency extension up to 1.2 GHz (1.8 GHz as a future extension) the technical requirements of cable components have increased significantly. This application note describes a test scenario tor testing cable components with an R&S®CLGD Cable Load Generator for DOCSIS 3.1 or R&S®SFD DOCSIS 3.1 Generator and an R&S®FSW Signal & Spectrum Analyzer.
24.01.2017 | AN-Nr. 1MA285
CLGD, FSW, Application Card, Kabelfernsehen, CATV, DOCSIS 3.1 DOCSIS 3.1-BER-Messungen an CATV-Verstärkern mit R&S®CLGD und R&S®FSW DOCSIS 3.1-BER-Messungen an CATV-Verstärkern mit R&S®CLGD und R&S®FSW CLGD, FSW, Application Card, Kabelfernsehen, CATV, DOCSIS 3.1 DOCSIS 3.1-BER-Messungen an CATV-Verstärkern mit R&S®CLGD und R&S®FSW DOCSIS 3.1-BER-Messungen an CATV-Verstärkern mit R&S®CLGD und R&S®FSW
06.12.2016
Als echter Engpass im Hinblick auf höhere Datenraten gilt bei der Kabelübertragung die sogenannte „letzte Meile“ bis zum Hausanschluss. Diese letzte Meile besteht aus Glasfaser- und Koaxialleitungen, Verstärkern und elektrisch/optischen Wandlern. Eine solche Kombination von Glasfaser- und Koaxialleitungen wird als HFC-Netz (Hybrid Fiber Coax) bezeichnet. DOCSIS 3.1 (Data Over Cable Service Interface Specification) bietet Kabelnetzbetreibern eine Möglichkeit, den Datendurchsatz für Downstream (DS) und Upstream (US) im vorhandenen Kabelnetz ohne teure Änderungen an der HFC‑Netzinfrastruktur zu maximieren.Diese Application Note geht auf die grundlegenden technologischen Neuerungen von DOCSIS 3.1 ein und stellt Messlösungen von Rohde & Schwarz vor.
02.03.2015 | AN-Nr. 7MH89