R&S®Cable Rider ZPH

Expect fast, expect efficient

R&S®Cable Rider ZPH
Abrir Lightbox
R&S®Cable Rider ZPH, side view
Abrir Lightbox
R&S®Cable Rider ZPH, rear view
Abrir Lightbox
R&S®Cable Rider ZPH, side view
Abrir Lightbox
R&S®Cable Rider ZPH, side view
Abrir Lightbox
R&S®Cable Rider ZPH
Abrir Lightbox
R&S®ZPH product video
Abrir Lightbox
R&S®Cable Rider ZPH R&S®Cable Rider ZPH, side view R&S®Cable Rider ZPH, rear view R&S®Cable Rider ZPH, side view R&S®Cable Rider ZPH, side view R&S®Cable Rider ZPH

Key facts

  • Frequency range up to 3 GHz or 4 GHz, upgrade via keycode
  • One-port model features: DTF, return loss, VSWR and cable loss measurements
  • Two-port model additionally features S21 measurements, spectrum and interference analysis, AM/FM/ASK/FSK demodulation
  • Ideal for field use: up to 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)
  • R&S signal & spectrum analyzer | 3 years warranty extension

Brief description

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements and spectrum analysis. Two different R&S®ZPH models are available to suit different needs, a pure one-port cable and antenna analyzer and a two-port model with additional spectrum analysis and tracking generator features.

Features & benefits

Fast

Fast operation with the R&S®Cable Rider ZPH

The R&S®Cable Rider ZPH boots up in less than 15 seconds and only needs 1 minute to warm up and can therefore begin measurement almost instantly.
The analyzer’s extremely fast measurements are the best in its class. The configuration overview menu allows you to view and change all parameter settings with just one keystroke. The fast synthesizers in the analyzer speed up measurements to 0.3 miliseconds per point.

Cable Rider ZPH
Open Lightbox

Set parameters quickly in the overview menu

Ideal for fast base station installation and maintenance: the R&S®Cable Rider ZPH

Efficient

Efficient operation with the R&S®Cable Rider ZPH

Downtime-free operation is efficient operation.
With a single full charge, the R&S®Cable Rider ZPH lasts an entire working day without needing to recharge or change the batteries.
If tasks require additional options, these can be purchased and activated without needing to send the analyzer to the service lab for an upgrade or recalibration.

Cable Rider ZPH
Open Lightbox

Efficient operation with the R&S®Cable Rider ZPH

R&S®Cable Rider ZPH with the R&S®ZN-Z103 calibration unit

Cable and antenna tester

Key capabilities for base station installation

All R&S®Cable Rider ZPH models share the same cable and antenna testing DNA: Distance-to-fault, VSWR and one port cable loss measurement is supported, as well as phase and smith chart displays of the respective measurements.

Cable Rider ZPH
Open Lightbox

R&S®Cable Rider ZPH

Base station maintenance with the R&S®Cable Rider ZPH

Spectrum analyzer

Additional features for spectrum analysis

In many cases, a field engineer needs multiple instruments to complete his tasks: a cable and antenna analyzer, a spectrum analyzer, a signal generator and a bias source. All of these instruments now combine into one powerful box with the additional features of R&S®Cable Rider ZPH Combi Analyzer (model .12.) The spectrum analyzer model also contains further measurement features, such as interference analysis and signal strength mapping.

R&S®Cable Rider ZPH
Open Lightbox

R&S®Cable Rider ZPH with R&S®HA-Z900

Interference hunting with R&S®Cable Rider ZPH and directional antenna R&S®HA-Z900

Calibration

One-step calibration

Calibration is only recommended if there are additional cables or adapters connected in between the analyzer and the device under test (DUT). This eliminates any influences on the measurement.
For convenient, one-step calibration, the R&S®ZN-Z103 calibration unit automatically switches internally between OPEN, SHORT and LOAD. This saves time and eliminates the hassle of physically changing the different calibration standards in the field.

Cable Rider ZPH
Open Lightbox

R&S®ZN-Z103 calibration unit

Portability

Weighs only 2.5 kg

With its ergonomic design, the R&S®Cable Rider ZPH has a small form factor and is lightweight. It comes with a convenient side strap to support your hand during the short measurement period. For hands-free operation, the holster (R&S®HA-Z322) comes with a harness that is carefully designed to equally distribute the weight around the body.

Cable Rider ZPH
Open Lightbox

Hands-free operation with the R&S®HA-Z322 holster

Durability

A single charge lasts for a day’s work

The R&S®Cable Rider ZPH will operate for an entire working day on a single charge. Simply charge it for approximately 4 hours and the lithium-ion battery pack will last up to 9 hours. The advantages of long battery life are obvious: the weight of an extra battery can be saved when climbing up a mast or tower and there’s no frustration due to the battery running out during a measurement.

Cable Rider ZPH
Open Lightbox

Handheld analyzer battery operation time

R&S®Cable Rider ZPH lasts longer then any other handheld analyzer on a single charge

Usability

Touchscreen gestures, non-reflective screen and backlit keypad

To enhance user experience, the user interface operates like a smart phone. The touchscreen is not limited to the menu bar; it also allows users to move the spectrum, zoom in and out of the span, add/delete markers, etc.

Cable Rider ZPH
Open Lightbox

Non-reflective screen and backlit keypad

Non-reflective screen makes it easier to work outdoors, even in bright sunlight so you can continue working though the night or under dim conditions thanks to the backlit keypad

Specifications
Specification in brief
Frequency range R&S®Cable Rider ZPH (1-port model .02) 2 MHz to 3 GHz
     with R&S®ZPH-B4 option 2 MHz to 4 GHz
  R&S®Cable Rider ZPH (2-port combi model .12)  
     with R&S®ZPH-K1 option 5 kHz to 3 GHz
     with R&S®ZPH-B4 and R&S®ZPH-K1 options 5 kHz to 4 GHz
Frequency resolution   1 Hz
Spectrum measurement with combi model .12 only, with R&S®ZPH-K1 option
Spectral purity, SSB phase noise f = 500 MHz, carrier offset 30 kHz < –88 dBc (1 Hz), typ. –95 dBc (1 Hz)
  f = 500 MHz, carrier offset 100 kHz < –98 dBc (1 Hz), typ. –105 dBc (1 Hz)
  f = 500 MHz, carrier offset 1 MHz < –118 dBc (1 Hz), typ. –125 dBc (1 Hz)
Displayed average noise level (DANL) 0 dB RF attenuation, termination 50 Ω, RBW = 1 kHz, VBW = 10 Hz, sample detector, log scaling, normalized to 1 Hz
     frequency preamplifier = off
  1 MHz to 10 MHz < –130 dBm, typ. –135 dBm
  10 MHz to 1 GHz < –142 dBm, typ. –146 dBm
  1 GHz to 4 GHz < –140 dBm, typ. –144 dBm
     frequency preamplifier = on
  1 MHz to 10 MHz < –150 dBm, typ. –160 dBm
  10 MHz to 3 GHz < –158 dBm, typ. –163 dBm
  3 GHz to 4 GHz < –156 dBm, typ. –161 dBm
     
Maximum permissible spurious signal measurement = reflection (S11)/one-port cable loss/distance-to-fault analysis +17 dBm (nom.)
Data points selectable 101 to 2501
Reflection measurement S11
Corrected directivity with
R&S®ZN-Z103
2 MHz ≤ f ≤ 4 GHz (with R&S®ZPH-B4 option installed) > 42 dB (nom.)
Measurement speed   0.3 ms/point
Result formats   magnitude, VSWR, magnitude and distance-to-fault, VSWR and distance-to-fault
1-port cable loss measurement
Result format   magnitude
Range selectable 1/2/5/10/20/50/100/120/150 dB
Distance-to-fault analysis    
Result formats   return loss (dB), VSWR
Fault resolution   (1.5 m × 108 m × velocity factor/span)
Maximum cable length depending on cable loss 1500 m (nom.)
Maximum rated input levels
DC voltage   50 V
CW RF power model .02: port 1 (power meter input) 30 dBm
  model .12: port 1 (RF input) 20 dBm
  port 2 (reflectometer input) 23 dBm
General data
Display resolution WVGA 800 × 480 pixel
Battery (R&S®HA-Z306 option) capacity 72 Wh
  voltage 11.25 V (nom.)
  operating time with new, fully charged battery Up to 9 hrs
Dimension W × H × D 202 mm × 294 mm × 76 mm
(8.0 in × 11.6 in × 3 in)
Weight   2.5 kg (5.5 lb)

Available options

Options for model .02 & .12
Product Description
Cable Rider ZPH-B4

R&S®ZPH-B4

Order number 1321.0380.02

Description

Frequency Upgrade

Options for model .02 only
Product Description

R&S®ZPH-B10

Order number 1321.0396.02

Description

GPS Support

Options for model .12 only
Product Description

R&S®ZPH-B22

Order number 1334.5627.02

Description

Preamplifier

Software options
Product Description
FPH-K9-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png

R&S®ZPH-K9

Order number 1321.0415.02

Description

Power Sensor Support

FPH-K19-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png

R&S®ZPH-K19

Order number 1321.0409.02

Description

Channel Power Meter

FPH-K29-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png

R&S®ZPH-K29

Order number 1321.0421.02

Description

Pulse Measurements with Power Sensor

Options for model .12 only
Product Description
ZPH-K1-Spectrum-Analysis-Measurement-Application_.png

R&S®ZPH-K1

Order number 1334.5604.02

Description

Spectrum analysis measurement application

FPH-K7-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png

R&S®ZPH-K7

Order number 1334.5633.02

Description

Modulation analysis AM/FM

(requires R&S®ZPH-K1)

FPH-K15-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png

R&S®ZPH-K15

Order number 1334.5640.02

Description

Interference Analysis

(requires R&S®ZPH-K1)

FPH-K16-Spectrum-Rider-FPH-handheld-spectrum-analyzer.png

R&S®ZPH-K16

Order number 1334.5656.02

Description

Signal strength mapping measurement application

(requires R&S®ZPH-K1)

Accessories
Product Description
HA-Z306 Lithium Ion Battery Pack

R&S®HA-Z306

Order number 1321.1334.02

Description

Lithium-ion battery pack, 6.4 Ah

HA-Z303 Battery Charger

R&S®HA-Z303

Order number 1321.1328.02

Description

Battery charger for R&S®HA-Z306

The battery charger is to be used for charging an additional battery outside the instrument. The internal battery is charged by the instrument itself.

HA-Z301-Spare-power-supply

R&S®HA-Z301

Order number 1321.1386.02

Description

Spare power supply, incl. mains plug for EU, UK, US, AUS, CH

HA-Z302 Car Adapter for cigarette lighter

R&S®HA-Z302

Order number 1321.1340.02

Description

Car adapter for cigarette lighter

The car adapter is suitable for both the instrument and the R&S®HA-Z303 external battery charger.

Reduces instrument rating to CAT III 300 V / CAT II 600 V during charging.

HA-Z322 Carrying holster

R&S®HA-Z322

Order number 1321.1370.02

Description

Carrying holster

HA-Z322 Rainproof carrying holster

R&S®HA-Z322

Order number 1321.1370.03

Description

Rainproof carrying holster

HA-Z220 Carrying Bag

R&S®HA-Z220

Order number 1309.6175.00

Description

Carrying bag

soft carrying bag

HA-Z321 Hard case

R&S®HA-Z321

Order number 1321.1357.02

Description

Hard Case for R&S®Spectrum Rider

RTH-Z4 Hard Shell Protective Carrying Case

R&S®RTH-Z4

Order number 1326.2774.02

Description

Hard shell protective carrying case

Dimensions: 455 mm x 368 mm x 166 mm. Weight: 2.5 kg.

HA-Z211 Spare USB cable

R&S®HA-Z211

Order number 1309.6169.00

Description

Spare USB cable

FSH-Z36 Headphones

R&S®FSH-Z36

Order number 1145.5838.02

Description

Headphones

HA-Z210 Spare Ethernet cable

R&S®HA-Z210

Order number 1309.6152.00

Description

Spare LAN cable

FSH-Z29 - calibration

R&S®FSH-Z29

Order number 1300.7510.03

Description

Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement

DC to 3.6 GHz forR&S®FSH4/R&S®FSH8

ZN-Z103 Calibration Unit

R&S®ZN-Z103

Order number 1321.1828.02

Description

Calibration Unit

RAM_front.jpg

R&S®RAM

Order number 0358.5414.02

Description

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

RAZ_front.jpg

R&S®RAZ

Order number 0358.5714.02

Description

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®FSH-Z38

Order number 1300.7740.02

Description

Matching pad 50/75 Ω, L section, N to BNC

bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W

R&S®Adapter BNC N

Order number 0118.2812.00

Description

N - BNC Adapter (N male - BNC female)

R&S®Adapter N

Order number 0092.6581.00

Description

N - Adapter (N male - N male)

R&S®Adapter SMA N

Order number 4012.5837.00

Description

N- Adapter (N male - SMA female)

R&S®Adapter N1 6 F

Order number 3530.6646.00

Description

N - Adapter (N male - 7/16 female)

R&S®Adapter N 16 M

Order number 3530.6630.00

Description

N - Adapter (N male - 7/16 male)

R&S®Adapter N FME F

Order number 4048.9790.00

Description

N - Adapter (N male - FME female)

R&S®Adapter N BNC M

Order number 0017.6742.00

Description

N - BNC Adapter (BNC male - banana female)

R&S®RDL50

Order number 1035.1700.52

Description

High-Power Attenuator, 50 W

0 Hz to 6 GHz, 20 dB

R&S®RBU100

Order number 1073.8495.03 (3 dB) / 1073.8495.06 (6 dB) / 1073.8495.10 (10 dB) / 1073.8495.20 (20 dB) / 1073.8495.30 (30 dB)

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

Antenna and antenna accessories
Product Description
HA-Z340 GPS receiver

R&S®HA-Z340

Order number 1321.1392.02

Description

GPS Receiver for R&S®Spectrum Rider

HA-Z1900 Yagi antenna

R&S®HA-Z1900

Order number 1328.6825.02

Description

Yagi antenna, 1710 MHz to 1990 MHz

HA-Z900 Yagi antenna

R&S®HA-Z900

Order number 1328.6283.02

Description

Yagi antenna, 824 MHz to 960 MHz

HA-Z901-RF-cable

R&S®HA-Z901

Order number 3626.2757.02

Description

RF cable (length: 1 m), DC to 6 GHz, N male/N male connectors

HA-Z902-Carrying-bag

R&S®HA-Z902

Order number 1328.6883.02

Description

Carrying bag for R&S®HA-Z900 or R&S®HA-Z1900 Yagi antenna

HE400BC-Basic-Handheld-Directional-Antenna_img-01.jpg

R&S®HE400BC

Order number 4104.6000K04

Description

Antenna

Basic Handheld Directional Antenna

R&S®HE400KB

Order number 4104.7770.04

Description

Cable set for R&S®HE400BC (requires R&S®HE300USB)

HE400_Handheld_Directional_Antenna_img1.jpg

R&S®HE400

Order number 4104.6000K02

Description

Antenna

Handheld Directional Antenna

R&S®HE400-K

Order number 4104.7770.02

Description

Cable set for R&S®HE400BC (requires R&S®HE300USB)

HE400HF HF antenna module

R&S®HE400HF

Order number 4104.8002.02

Description

HF antenna module, 8.3 kHz to 30 MHz

HF antenna module, 8.3 kHz to 30 MHz (handle to be bought separately)

HE400VHF VHF antenna module

R&S®HE400VHF

Order number 4104.8202.02

Description

VHF antenna module, 20 MHz to 200 MHz

VHF antenna module, 20 MHz to 200 MHz (handle to be bought separately)

20 MHz to 200 MHz

HE400UWB UWB antenna module

R&S®HE400UWB

Order number 4104.6900.02

Description

UWB antenna module, 30 MHz to 6 GHz

UWB antenna module, 30 MHz to 6 GHz (handle to be bought separately)

30 MHz to 6 GHz

HE400LP Log-periodic antenna module

R&S®HE400LP

Order number 4104.8402.0

Description

Log-periodic antenna module, 450 MHz to 8 GHz

Log-periodic antenna module, 450 MHz to 8 GHz (handle to be bought separately)

450 MHz to 8 GHz

HE400CEL Cellular antenna module

R&S®HE400CEL

Order number 4104.7306.02

Description

Cellular antenna module, 700 MHz to 2.5 GHz

Cellular antenna module, 700 MHz to 2.5 GHz (handle to be bought separately)

700 MHz to 2500 MHz

HE300USB USB adapter

R&S®HE-300USB

Order number 4080.9440.02

Description

USB adapter, for R&S®HE300/R&S®HL300

R&S®HA-Z350

Order number 1321.1405.02

Description

Log-periodic OEM antenna, 700 MHz to 4 GHz

R&S®FSH-Z320

Order number 1309.6600.00

Description

RF cable (length: 1 m), DC to 8 GHz, armored, N male/N female connectors

for R&S®FSH-K41 option, DC to 8 GHz

R&S®FSH-Z321

Order number 1309.6617.00

Description

RF cable (length: 3 m), DC to 8 GHz, armored, N male/N female connectors

for R&S®FSH-K41 option, DC to 8 GHz

R&S®TS-EMF

Order number 1158.9295.05

Description

Portable EMF measurement system, hard case

Hard Case

TSEMF-B1 Isotropic antenna 30 MHz

R&S®TSEMF-B1

Order number 1074.5719.02

Description

Isotropic antenna, 30 MHz to 3 GHz, for R&S®TS-EMF

30 MHz to 3 GHz for R&S®TS-EMF (Delivered with individual calibration data (factory calibration) as standard.)

TSEMF-B2 Isotropic antenna 700 MHz

R&S®TSEMF-B2

Order number 1074.5702.02

Description

Isotropic antenna, 700 MHz to 6 GHz, for R&S®TS-EMF

700 MHz to 6 GHz for R&S®TS-EMF (Delivered with individual calibration data (factory calibration) as standard.)

TSEMF-B3 Isotropic antenna 9kHz

R&S®TSEMF-B3

Order number 1074.5690.02

Description

Isotropic antenna, 9 kHz to 200 MHz, for R&S®TS-EMF

9 kHz to 200 MHz for R&S®TS-EMF (Delivered with typical calibration data as standard.)

TSEMF-CV Converter cable

R&S®TSEMF-CV

Order number 1158.9250.02

Description

Converter cable

HZ15_front.jpg

R&S®HZ-15

Order number 1147.2736.02

Description

E and H near-field probe set

HZ-17 H-field near-field probe set

R&S®HZ-17

Order number 1339.4141.02

Description

H near-field probe set

HZ-16-preamplifier_46845_02_img01.jpg

R&S®HZ-16

Order number 1147.2720.02

Description

Preamplifier

100 kHz to 3 GHz, 20 dB gain, for R&S®HZ-15 and R&S®HZ-17 probe sets

ZV-Z93_front.jpg

R&S®ZV-Z93

Order number 1301.7595.25

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 635 mm (25 in)

ZV-Z93_front.jpg

R&S®ZV-Z93

Order number 1301.7595.38

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 965 mm (38 in)

ZV-Z193 Test port cable

R&S®ZV-Z193

Order number 1306.4520.24

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 610 mm (24 in)

ZV-Z193 Test port cable

R&S®ZV-Z193

Order number 1306.4520.36

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 914 mm (36 in)

ZV-Z193 Test port cable

R&S®ZV-Z193

Order number 1306.4520.60

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 1524 mm (60 in)

R&S®ZV-Z95

Order number 1301.7608.25

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 635 mm (25 in)

R&S®ZV-Z95

Order number 1301.7608.38

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 965 mm (38 in)

R&S®ZV-Z195

Order number 1306.4536.24

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 610 mm (24 in)

R&S®ZV-Z195

Order number 1306.4536.36

Description

2.92 mm (f) / 2.92 mm (m), 40 GHz

Power sensor
Product Description
FSH-Z14_front.jpg

R&S®FSH-Z14

Order number 1120.6001.02

Description

Directional power sensor

Directional power sensor, 25 MHz to 1 GHz

FSH-Z44_front.jpg

R&S®FSH-Z44

Order number 1165.2305.02

Description

Directional power sensor

Directional power sensor, 200 MHz to 4 GHz

NRPZ211_front.jpg

R&S®NRP-Z211

Order number 1417.0409.02 / 1417.0409.04

Description

Two-Path diode power sensors

Universal power sensor, 10 MHz to 8 GHz, 100 mW, two-path

Measurement range: -60 dBm to +20 dBm,
Frequency range: 10 MHz to 8 GHz,
N connector

NRPZ221_front.jpg

R&S®NRP-Z221

Order number 1417.0309.02

Description

Two-Path Diode Power Sensors

Universal power sensor, 10 MHz to 18 GHz, 100 mW, two-path

Measurement range: -60 dBm to +20 dBm,
Frequency range: 10 MHz to 18 GHz,
N connector

NRPZ81_front.jpg

R&S®NRP-Z81

Order number 1137.9009.02

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 18 GHz,
N connector

NRPZ85_front.jpg

R&S®NRP-Z85

Order number 1411.7501.02

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 40 GHz,
2.92 mm connector

NRPZ86_front.jpg

R&S®NRP-Z86

Order number 1417.0109.40

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 40 GHz,
2.4 mm connector

NRPZ86var44_front.jpg

R&S®NRP-Z86 model .44

Order number 1417.0109.44

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 44 GHz,
2.4 mm connector

NRP8S_img.jpg

R&S®NRP8S

Order number 1419.0006.02

Description

Three-path diode power sensor

For USB operation

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 8 GHz
N (m) connector

NRP18S_front.jpg

R&S®NRP18S

Order number 1419.0029.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 18 GHz
N (m) connector

NRP33S_front.jpg

R&S®NRP33S

Order number 1419.0064.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 33 GHz
3.5 mm (m) connector

NRP40S_img.jpg

R&S®NRP40S

Order number 1419.0041.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 100 mW
Frequency range: 50 MHz to 40 GHz
2.92 mm (m) connector

NRP50S_img.jpg

R&S®NRP50S

Order number 1419.0087.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 100 mW
Frequency range: 50 MHz to 50 GHz
2.4 mm (m) connector

NRP18T_Thermal_power_sensor_img1.jpg

R&S®NRP18T

Order number 1424.6115.02

Description

Thermal power sensor

300 nW to 100 mW, DC to 18 GHz

NRP33T_Thermal_power_sensor_img1.jpg

R&S®NRP33T

Order number 1424.6138.02

Description

Thermal Power Sensor

300 nW to 100 mW, DC to 33 GHz

NRP40T_Thermal_power_sensor_img1.jpg

R&S®NRP40T

Order number 1424.6150.02

Description

Thermal Power Sensor

300 nW to 100 mW, DC to 40 GHz

NRP50T_Thermal_power_sensor_img1.jpg

R&S®NRP50T

Order number 1424.6173.02

Description

Thermal Power Sensor

NRP67T_Thermal_power_sensor_img1.jpg

R&S®NRP67T

Order number 1424.6196.02

Description

Thermal Power Sensor

NRP110T_Thermal_power_sensor_img1.jpg

R&S®NRP110T

Order number 1424.6215.02

Description

Thermal Power Sensor

NRP6A_Average_power_sensors_img1.jpg

R&S®NRP6A

Order number 1424.6796.02

Description

Average Power Sensor

100 pW to 200 mW, 8 kHz to 6 GHz

NRP18A_Average_power_sensors_img1.jpg

R&S®NRP18A

Order number 1424.6815.02

Description

Average Power Sensor

100 pW to 200 mW, 8 kHz to 18 GHz

Power sensor adapter cable
Product Description
FSH-Z144 USB adapter cable

R&S®FSH-Z144

Order number 1145.5909.02

Description

USB adapter cable

USB adapter cable for R&S®FSH-Z14/R&S®FSH-Z44 power sensors

R&S®NRP-Z4

Order number 1146.8001.02 / 1146.8001.04 / 1146.8001.06 / 1146.8001.11

Description

USB Adapter (passive)

For all R&S®NRP-Z sensors. The R&S®NRPZ4 passive USB adapter provides all basic functions, as it handles the transmission of settings and measurement data as well as the power supply of the sensor via the USB bus. Available cable lengths: Available cable lengths: 2.0m, 0.5m and 0.15m Available cable length for panel-mount: 1m

NRP-ZKU USB interface cable

R&S®NRP-ZKU

Order number 1419.0658.03

Description

USB interface cable, length: 1.5 m

Optical power sensor and accessories
Product Description
HA-Z360-OEM-USB-Optical-Power-Meter

R&S®HA-Z360

Order number 1334.5162.00

Description

OEM USB Optical Power Meter (Germanium)

HA-Z361-OEM-USB-Optical-Power-Meter

R&S®HA-Z361

Order number 1334.5179.00

Description

OEM USB Optical Power Meter (filtered InGaAs)

HA-Z362-SC-Adapter

R&S®HA-Z362

Order number 1334.5185.00

Description

SC Adapter for Optical Power Meter

HA-Z363-LC-Adapter

R&S®HA-Z363

Order number 1334.5191.00

Description

LC Adapter for Optical Power Meter

HA-Z364-2.5-mm-Universal-Adapter

R&S®HA-Z364

Order number 1334.5204.00

Description

2.5 mm Universal Adapter for Optical Power Meter

HA-Z365 Universal adapter for optical power meter

R&S®HA-Z365

Order number 1334.5210.00

Description

1.25 mm Universal Adapter for Optical Power Meter

HA-Z366-Patch-Cord

R&S®HA-Z366

Order number 1334.5227.00

Description

Patch Cord SC-LC SM, SX, length: 1 m

HA-Z367 Patch Cord

R&S®HA-Z367

Order number 1334.5233.00

Description

Patch Cord SC-SC SM, SX, length: 1 m

R&S®ZPH product video
R&S®ZPH Cable Rider - Video

The R&S®Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field.

More details

R&S®ZPH product feature video
Expect more from the Cable Rider ZPH 2-port cable and antenna analyzer

You already expect fast and efficient cable and antenna measurements from the Rohde and Schwarz Cable Rider ZPH. Now the new 2-port model adds further functions to increase effectiveness in the field.

More details

Mobile network testing

Mobile network testing solutions from Rohde & Schwarz let you reconcile your current and future dilemmas.

More information

Teaching-Software for Multi-User Student Labs
Teaching-Software for Multi-User Student Labs

The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.

Solicitar información

¿Tiene alguna pregunta o necesita más información?Simplemente llene este formulario y nos comunicaremos con usted a la mayor brevedad posible.

Permiso de marketing

Deseo recibir información de Rohde & Schwarz por

¿Qué significa esto exactamente?

Estoy de acuerdo con que ROHDE & SCHWARZ GmbH & Co. KG y la entidad o subsidiaria ROHDE & SCHWARZ que figure en la Declaración de confidencialidad del sitio web se ponga en contacto conmigo a través del canal elegido (correo electrónico o correo postal) para fines de marketing y publicitarios (p. ej., información sobre ofertas especiales y promociones de descuentos) en relación con, pero sin limitarse a, productos y soluciones para prueba y medición, comunicaciones seguras, monitoreo y pruebas de redes, broadcast y media así como ciberseguridad.

Sus derechos

Esta declaración de consentimiento se puede retirar en cualquier momento enviando un correo electrónico a news@rohde-schwarz.com con el asunto «Cancelar mi suscripción». Además, en cada correo electrónico enviado se incluye un enlace para cancelar por correo electrónico la suscripción a futuros anuncios. En la Declaración de privacidad encontrará información adicional sobre el uso de los datos personales y el procedimiento de retirada.

Gracias.

Su equipo Rohde & Schwarz

Se ha producido un error. Inténtelo de nuevo más tarde.
Información general y jurídica

Precio de venta sugerido por el fabricante. Este precio no incluye el IGV o IVA. Precios y ofertas están destinados exclusivamente para empresarios y no para el consumidor final.