R&S®ZVA-Zxxx millimeterwave converters have a wide dynamic range. Rohde & Schwarz converters are very convenient to operate and enable fast measurements.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

The R&S®ZCxxx mmWave converters allow mmWave measurements in the frequency range up to 1.1 THz.

mmWave receiver modules for antenna test systems with the highest dynamic range.

ZVAX-TRM extension unit - for the R&S®ZVA/ZVT VNAs for measurements on T/R modules, receivers, transceivers and power amplifiers.

mmWave receiver module, with a harmonic mixer, a booster amplifier for controlled input power and a low noise amplifier for the IF signal.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

High-end VNA test cables with ruggedized connectors, armored construction for exceptional mechanical stability and breakdown withstand to crush forces,18 GHz to 67 GHz.

R&S®ZVA110 vector network analyzer - high performance up to 110 GHz

First true eight-port/six-port vector network analyzer with a frequency range from 300 kHz to 8 GHz/10 MHz to 20 GHz

Describe todas las funciones y los comandos de control remoto del instrumento y proporciona ejemplos de medición y programación.

El R&S®ZVA y la opción R&S®ZVA-K9 permiten mediciones de retardo de grupo absoluto en dispositivos con LO embebido.

may 17, 2013

Models: R&S®ZVA110, R&S®ZVA110 w/o RF cables, R&S®ZVA110 High Power Model, R&S®ZVA110 High Power Model w/o RF cables

Models: R&S®ZVA110, R&S®ZVA110 w/o RF cables, R&S®ZVA110 High Power Model, R&S®ZVA110 High Power Model w/o RF cables

Models: R&S®ZVA110, R&S®ZVA110 w/o RF cables, R&S®ZVA110 High Power Model, R&S®ZVA110 High Power Model w/o RF cables

Mediciones de mezcladores de ondas milimétricas utilizando convertidores de la familia R&S<sup>®</sup>ZVA

nov 17, 2008 | N.º de nota de aplicación 1EZ57

Mediciones multipuerto de ondas milimétricas utilizando convertidores de la familia R&S<sup>®</sup> ZVA

oct 09, 2007 | N.º de nota de aplicación 1EZ56

Mediciones de ondas milimétricas utilizando convertidores de la familia R&S<sup>®</sup> ZVA

oct 09, 2007 | N.º de nota de aplicación 1EZ55

Use el analizador de redes vectoriales R&S®ZVA y el amplificador de banda ancha R&S®BBA150 para lograr resultados precisos y reproducibles en un mínimo tiempo de prueba.

sept 27, 2013

R&S ZVA Vector Network Analyzer - Specifications

Elija las soluciones de prueba de Rohde & Schwarz para componentes pasivos y obtenga resultados confiables sin renunciar a la velocidad.

R&S ZVA110 Vector Network Analyzer System - Specifications

Esta nota de aplicación presenta dos métodos alternativos de medición de la eficiencia de potencia añadida.

may 22, 2013 | N.º de nota de aplicación 1EZ64

R&S®ZVA-Zxx Millimeter Wave Converters - Product Brochure

Parámetros S de un dispositivo de adaptación de impedancia entre 50 y 75 ohmios utilizando R&S®ZVx VNA

may 06, 2009 | N.º de nota de aplicación 1EZ59

R&S®ZVA Vector Network Analyzer - Product Brochure

Mediciones de parámetros S en módulos amplificadores de potencia para pulsos de radar

abr 11, 2013 | N.º de nota de aplicación 1MA126