R&S®RTM3000 oscilloscope

R&S®RTM3000 oscilloscope
Abrir Lightbox
R&S®RTM3000 oscilloscope
Abrir Lightbox
R&S®RTM3000 oscilloscope
Abrir Lightbox
R&S®RTM3000 oscilloscope
Abrir Lightbox
R&S®RTM3000 oscilloscope
Abrir Lightbox
R&S®RTM3000 oscilloscope
Abrir Lightbox
R&S®RTM3000 Oscilloscope, Front view R&S®RTM3000 Oscilloscope, Front view R&S®RTM3000 Oscilloscope, Side view R&S®RTM3000 Oscilloscope, Side view R&S®RTM3000 Oscilloscope, Hero view R&S®RTM3000 Oscilloscope, Application Image

Key Facts

  • Bandwidth: 100 MHz to 1GHz
  • Sample rate: up to 5 Gsample/s
  • Memory depth: up to 80 Msample
  • ADC resolution: 10-bit
  • Display: 10.1’’ capacitive touchscreen

See more of your signal with the power of 10

Designed as daily problem-solving tool, the R&S®RTM3000 combines the power of ten (10-bit ADC, 10 times the memory and 10.1" touchscreen) with a Rohde & Schwarz probe interface for all Rohde & Schwarz probes.

  • Four times more vertical resolution than standard 8-bit ADCs
  • Maintains fast sampling rates at all times
  • 10.1" touchscreen with gesture support

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTM3000 features a customized Rohde & Schwarz designed 10-bit A/D converter that delivers a four-fold improvement over conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltages across the switching device must be determined during the on/off times within the same acquisition.

10-bit A/D converter
Abrir Lightbox

10-bit A/D converter

10-bit A/D converter uncovers even small signal details and ensures a vertical resolution four times higher than traditional oscilloscopes.

Segmented memory

40 Msample standard and 80 Msample interleaved

The R&S®RTM3000 offers a class-leading memory depth: 40 Msample per channel are available, even 80 Msample in interleaved mode. This is eight times more than similar oscilloscopes in the same instrument class. The user captures longer acquisition sequences even at high sampling rates for more analysis results, e.g. when analyzing transients of switched-mode power supplies.

40 Msample standard memory
Abrir Lightbox

40 Msample standard memory

Capture and analyze pulsed and burst signals over a long period with up to 80 Msample standard acquisition memory

Capture more time at full bandwidth

Segmented memory: 400 Msample with history function

The R&S®RTM-K15 option with deep, segmented memory analyzes signal sequences over a long observation period. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. Thanks to the variable segment size the 400 Msample memory is optimally utilized. In history mode, previous acquisitions to the maximum segmented memory depth of 400 Msample are available for further analysis.

400 Msample segmented memory
Abrir Lightbox

400 Msample segmented memory

Capture the longest time periods with class-leading 400 Msample memory

Logic analysis with the MSO option

16 additional digital channels

The R&S®RTM-B1 option turns every R&S®RTM3000 into an intuitive-to-use MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and timecorrelated to each other. For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements.

4-bit DAC signal change
Abrir Lightbox

4-bit DAC signal change

The R&S®RTM3000 captures and analyzes analog and digital signals synchronously and time-correlated with each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTM-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns for e.g. I2C, SPI, UART and CAN/LIN can be used.

Waveform and pattern generator
Abrir Lightbox

Waveform and pattern generator

In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Digital voltmeter

Measure and display electrical potential

The R&S®RTM3000 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Measurement functions include DC, AC+DC (RMS) and AC (RMS) – included as standard.

Digital voltmeter
Abrir Lightbox

Digital voltmeter

The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S®RTM3000 is activated at the push of a button and by simpling entering the center frequency and span. Thanks to the R&S®RTM3000 oscilloscopes’ high-performance FFT functionality, signals can be analyzed with up to 128k points. Other practical tools include cursor measurements and autoset in frequency domain.

FFT of a square wave
Abrir Lightbox

FFT of a square wave

The high-performance FFT functionality analyzes signals up to 128k points.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. Masks assess the quality and stability of a DUT based on statistical pass/fail evaluation. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S®RTM3000. This pulse output can be used to trigger actions in the measurement setup.

Mask test with result statistics
Abrir Lightbox

Mask test with result statistics

The pass/fail evaluation assesses the quality and stability of the DUT

The best choice for power

See power signal details with up to 10-bit resolution

Even the smallest signal details of a high dynamic signal matter for power measurements. Verification of RDS(on) of a MOSFET is one example. The high ADC resolution of the R&S®RTM3000 oscilloscopes increases the vertical resolution up to 10 bit. Previously unseen signal details become visible and measurable. In the example of RDS(on), it makes it possible to measure the slope of the drain-to-source-voltage while the switch is closed.

Power analysis
Abrir Lightbox

Power analysis

Analyze the input, output and transfer function of switched-mode power supplies

Available models

Available models
Modelos
Bandwidth
Channels
Sample rate
Max. memory depth
Optional MSO

R&S®RTM3002

Order Number 1335.8794.02

Bandwidth
100 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004

Order Number 1335.8794.04

Bandwidth
100 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B222

Order Number 1335.8794P22

Bandwidth
200 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B242

Order Number 1335.8794P24

Bandwidth
200 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B223

Order Number 1335.8794P32

Bandwidth
350 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B243

Order Number 1335.8794P34

Bandwidth
350 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B225

Order Number 1335.8794P52

Bandwidth
500 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B245

Order Number 1335.8794P54

Bandwidth
500 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B2210

Order Number 1335.8794P62

Bandwidth
1 GHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B2410

Order Number 1335.8794P64

Bandwidth
1 GHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels
Specifications
Vertical system
Analog channels R&S®RTM3002; R&S®RTM3004 2; 4
Digital channels (opt.) 16
Bandwidth (-3 dB) R&S®RTM3002/3004 (with R&S®RTM-B2x2/-B2x3/-B2x5/-B2x10 options) 100 MHz, 200 MHz, 350 MHz, 500 MHz, 1 GHz
Rise time R&S®RTM3002/3004 (with R&S®RTM-B2x2/-B2x3/-B2x5/-B2x10 options) 3.5 ns, 1.75 ns, 1 ns, 700 ps, 350 ps
Input impedance 50 Ω ± 1,5% (meas.), 1 MΩ ± 1 % (meas.) || 14 pF ± 1 pF (meas.)
Input sensitivity max. bandwidth in all ranges at 1 MΩ: 500 μV/div to 10 V/div
at 50 Ω: 500 μV/div to 1 V/div
ADC resolution 10 bit, up to 16 bit with high resolution decimation
DC gain accuracy offset and position = 0, maximum operating temperature change of ±5°C after self-alignment input sensitivity > 5 mV/div: ±1.5 % of full scale
input sensitivity > 5 mV/div: ±2 % of full scale
Acquisition system
Realtime sampling rate 2.5 Gsample/s; 5 Gsample/s, interleaved
Acquisition memory standard: 40 Msample (80 Msample interleaved)
with R&S®RTM-K15 option: 400 Msample segmented memory
Max. acquisition rate 64 000 waveforms/s
(2 000 000 in fast segmented memory mode)
Horizontal system
Timebase range selectable between 0.5 ns/div and 500 s/div
Accuracy (after delivery/calibration) ±2.5 ppm
Channel-to-channel skew < 200 ps (meas.)
Channel deskew ±500 ns
Trigger system
Standard Trigger types edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus, timeout
Optional Trigger types I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN,ARINC 429, MIL-STD-1553
Trigger sensitivity with DC, AC, LF reject, noise reject 1 GHz, 500 MHz, 350 MHz > 2.2 mVpp input sensitivity + 1 div (nom.) (input sensitivity: [mV/div]) 200 MHz, 100 MHz > 1.5 mVpp input sensitivity + 0.8 div (nom.) (input sensitivity: [mV/div]) 20 MHz > 0.6 mVpp input sensitivity + 0.4 div (nom.) (input sensitivity: [mV/div]) with HF reject all input sensitivities 1 div (meas.)
Analysis and measurement functions
Automatic measurements 32
Cursor measurements 4
Waveform mathematics 5 equations math on math (addition, substraction, multiplication, division, square, square root, abs. value, reciprocal, inverse, common log,, natural log., derivative, integral, low pass, high pass, track unipolar + bipolar on period, frequency, pulse width, duty cycle)
Mask testing
Mask definition elementary (tolerance mask around the signal)
History and segmented memory
Number of segments up to 34 952
Protocol trigger and decode
Supported protocols I2C, SPI, UART/RS-232/RS-422/RS-485, CAN, LIN, I2S, MIL-STD-1553, ARINC429
Waveform generator
Resolution 14-bit
Sample rate 250 Msample/s
Amplitude high Z; 50 Ω 20 mV to 5 V (Vpp); 10 mV to 2.5 V (Vpp)
DC offset high Z; 50 Ω ±5 V; ±2.5 V
Arbitrary sampling rate; memory depth max. 10 Msample/s; 32k points
Logic analyzer (MSO) functionality
Digital input channels 16
MSO Memory depth two logic probes: 40 Msample for every channel
one logic probe: 80 Msample for every channel
MSO Bandwidth 400 MHz (meas.)
MSO sampling rate 2.5 Gsample/s
MSO input impedance 100 kΩ ± 2 % || ~4 pF (meas.) at probe tips
Parallel buses up to 4
General data
Dimensions W × H × D 390 mm × 220 mm × 152 mm
(15.4 in × 8.66 in × 5.98 in)
Weight 3.3 kg (7.27 lb)
Display 10.1" WXGA TFT color display (1280 × 800 pixel)
Interfaces USB host with MTP, USB device, LAN, powerful web server for remote display and operation
Operating system Embedded

Available options

General
Product
Descripción

Order Number 1335.8988.02

Descripción

Mixed signal option, 400 MHz

The RTM-B1 MSO option is a powerful tool for debugging digital designs with a sampling rate of up to 5 GSa/s and a memory depth of up to 20 Msa.

R&S®RTM-B6

Order Number 1335.8994.02

Descripción

Arbitrary waveform generator

Adds a 25 MHz signal generator and a 4-bit pattern generator to your R&S®RTM3000 oscilloscope.

Bandwidth upgrade
Product
Descripción
R&S®RTM-B222

Order Number 1335.9003.02

Descripción

Bandwidth upgrade of the R&S®RTM3002 to 200 MHz bandwidth

R&S®RTM-B223

Order Number 1335.9010.02

Descripción

Bandwidth upgrade of the R&S®RTM3002 to 350 MHz bandwidth

R&S®RTM-B225

Order Number 1335.9026.02

Descripción

Bandwidth upgrade of the R&S®RTM3002 to 500 MHz bandwidth

R&S®RTM-B2210

Order Number 1335.9032.02

Descripción

Bandwidth upgrade of the R&S®RTM3002 to 1GHz bandwidth

R&S®RTM-B242

Order Number 1335.9049.02

Descripción

Bandwidth upgrade of the R&S®RTM3004 to 200 MHz bandwidth

R&S®RTM-B243

Order Number 1335.9055.02

Descripción

Bandwidth upgrade of the R&S®RTM3004 to 350 MHz bandwidth

R&S®RTM-B245

Order Number 1335.9061.02

Descripción

Bandwidth upgrade of the R&S®RTM3004 to 500 MHz bandwidth

R&S®RTM-B2410

Order Number 1335.9078.02

Descripción

Bandwidth upgrade of the R&S®RTM3004 to 1 GHz bandwidth

Serial triggering and decoding
Product
Descripción
R&S®RTM-K1

Order Number 1335.8807.02

Descripción

I²C/SPI serial triggering and decoding

Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses

R&S®RTM-K2

Order Number 1335.8813.02

Descripción

UART/RS-232/RS-422/RS-485 serial triggering and decoding

Triggering and decoding of UART based protocols and RS-232, RS-422 as well as RS-485 buses

R&S®RTM-K3

Order Number 1335.8820.02

Descripción

CAN/LIN serial triggering and decoding

Triggering and decoding of CAN and LIN interfaces

R&S®RTM-K5

Order Number 1335.8842.02

Descripción

I²S/LJ/RJ/TDM triggering and decoding

Triggering and decoding of I²S buses

R&S®RTM-K6

Order Number 1335.8859.02

Descripción

MIL-1553 serial triggering and decoding

Triggering and decoding of MIL-STD-1553 buses

R&S®RTM-K7

Order Number 1335.8865.02

Descripción

ARINC 429 serial triggering and decoding

Triggering and decoding of ARINC 429 buses

General analysis
Product
Descripción
R&S®RTM-K15

Order Number 1335.8907.02

Descripción

History and segmented memory

History and 400 Msample segmented memory.

R&S®RTM-K31

Order Number 1335.8920.02

Descripción

Power analysis

When analyzing power electronics, the input and output and the internal transfer function of the component have to be characterized. The power analysis option provides the necessary measurement functions, including inrush current, output spectrum and safe operating area (SOA).

R&S®RTM-K36

Order Number 1335.9178.02

Descripción

Frequency Response Analysis (Bode plot)

The R&S®RTM-K36 frequency response analysis (Bode plot) option lets you perform low-frequency response analysis on your oscilloscope easily and quickly. It characterizes the frequency response of a variety of electronic devices, including passive filters and amplifier circuits. For switch mode power supplies, it measures the control loop response and power supply rejection ratio.

R&S®RTM-K37

Order Number 1335.9184.02

Descripción

Spectrum analysis and spectrogram

The spectrum analysis option enhances the powerful FFT capability of R&S®RTM3000 oscilloscopes with spectrogram display

General accessories
Product
Descripción
R&S®RTB-Z1

Order Number 1333.1728.02

Descripción

Front cover

Protects the front of the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000

R&S®RTB-Z4

Order Number 1335.9290.02

Descripción

Transit case with wheels for R&S®RTB

R&S®RTB-Z3

Order Number 1333.1734.02

Descripción

Soft bag

Stores the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 oscilloscope and accessories

Order Number 1335.7875.02

Descripción

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

R&S®ZZA-RTB2K

Order Number 1333.1711.02

Descripción

19" rackmount adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU

R&S®RT-Z2T

Order Number 1338.0007.02

Descripción

Probe adapter

Enables Tek’s TekProbe-BNC level 2 probes to connect to Rohde & Schwarz probe interface

Passive probes
Product
Descripción

Order Number 1333.2401.02

Descripción

Passive probe, 500 MHz, 10:1

Order Number 1409.7550.00

Descripción

Passive probe, 500 MHz, 10:1

Order Number 1333.1370.02

Descripción

Passive probe, 38 MHz, 1:1

Active single-ended probes
Product
Descripción

Order Number 1333.0815.02

Descripción

Active single-ended probe, 1 GHz, BNC interface

Order Number 1418.7007.02

Descripción

Active single-ended probe, 1 GHz, Rohde & Schwarz probe interface

Order Number 1410.4080.02

Descripción

Active single-ended probe, 1 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

Order Number 1410.3502.02

Descripción

Active single-ended probe, 1.5 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

Active differential probes
Product
Descripción

Order Number 1333.0821.02

Descripción

Active differential probe, 200 MHz, BNC interface

Order Number 1333.0838.02

Descripción

Active differential probe, 800 GHz, BNC interface

Order Number 1410.4715.02

Descripción

Active differential probe, 1 GHz, Rohde & Schwarz probe interface

Order Number 1410.4409.02

Descripción

Active differential probe, 1.5 GHz, Rohde & Schwarz probe interface

Power rail probes
Product
Descripción

Order Number 1800.5006.02

Descripción

Power rail probe, 2 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

2.0 GHz, 1:1, 50 kΩ, R&S probe interface

High voltage probes
Product
Descripción

Order Number 1333.0873.02

Descripción

250 MHz passive high voltage probe

Order Number 1409.7720.02

Descripción

400 MHz passive high voltage probe

Order Number 1409.7737.02

Descripción

400 MHz passive high voltage probe

Order Number 1337.9700.02

Descripción

25 MHz High voltage differential probe

Order Number 1337.9800.02

Descripción

25 MHz High voltage differential probe

Order Number 1422.0703.02

Descripción

100 MHZ high voltage differential probe

Order Number 1800.2307.02

Descripción

200 MHz High voltage differential probe

Order Number 1800.2107.02

Descripción

100 MHz High voltage differential probe

Order Number 1800.2207.02

Descripción

200 MHz High voltage differential probe

Order Number 1800.2007.02

Descripción

100 MHz High voltage differential probe

Current probes
Product
Descripción

Order Number 1333.0850.02

Descripción

AC/DC 20 kHz current probe

Order Number 1333.0844.02

Descripción

100 kHz current probe

Order Number 1409.8204.02

Descripción

2 MHZ current probe

Order Number 1409.7750K02

Descripción

10 MHZ current probe

Order Number 1409.8210.02

Descripción

10 MHZ Current probe

Order Number 1409.8227.02

Descripción

50 MHZ Current probe

Order Number 1409.7766K02

Descripción

100 MHZ current probe

Order Number 1409.8233.02

Descripción

100 MHZ current probe

Order Number 1801.4932.02

Descripción

120 MHz current probe

Order Number 1409.7772K02

Descripción

120 MHz current probe

EMC near-field probes
Product
Descripción

Order Number 1147.2736.02

Descripción

E and H near-field probe set

Logic probes
Product
Descripción
R&S®RT-ZL04

Order Number 1333.0721.02

Descripción

400 MHz logic probe

Probe accessories
Product
Descripción

Order Number 1409.7789.02

Descripción

Power supply for probes

Power supply for R&S®RT-ZC10/20/30 probes, +/-12V DC, +/-2.5A

Order Number 1410.4744.02

Descripción

External attenuator

10:1, 2.0 GHz, 1.3 pF, 60 V DC, 42 V AC (peak) for R&S®RT-ZD20/30 probes. Included in R&S®RT-ZD10.

Application bundles
Product
Descripción
R&S®RTM-PK1

Order Number 1335.8942.02

Descripción

Application bundle (R&S®RTM-K1, -K2, -K3, -K5, -K6, -K7, -K15, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTM-K1), UART/RS-232/RS-422/RS-485 (R&S®RTM-K2) and CAN/LIN (R&S®RTM-K3), I²S (R&S®RTM-K5), MIL-1553 (R&S®RTM-K6), ARINC429 (R&S®RTM-K7) history and segmented memory (R&S®RTM-K15), spectrum analysis and spectrogram (R&S®RTM-K37), power analysis (R&S®RTM-K31), frequency response analysis (R&S®RTM-K36), arbitrary generator (R&S®RTM-B6) for R&S®RTM3000 models

R&S®RTM-PK1US*

Order Number 1335.9190.02

Descripción

Application bundle (R&S®RTM-K1, -K2, -K3, -K5, -K6, -K7, -K15, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTM-K1), UART/RS-232/RS-422/RS-485 (R&S®RTM-K2) and CAN/LIN (R&S®RTM-K3), I²S (R&S®RTM-K5), MIL-1553 (R&S®RTM-K6), ARINC429 (R&S®RTM-K7) history and segmented memory (R&S®RTM-K15), power analysis (R&S®RTM-K31), frequency response analysis (R&S®RTM-K36), spectrum analysis and spectrogram (R&S®RTM-K37), arbitrary generator (R&S®RTM-B6) for R&S®RTM3000 models * ONLY distributed in North America

Application packages
Product
Descripción
R&S®RTM3K-LSSB

Order Number 1335.9149P02

Descripción

Low-speed serial bus package (R&S®RTM3004, -K1, -K2, -K15, -B1)

Low-speed serial bus package, contains base unit of R&S®RTM3004, trigger and decoding I2C/SPI (R&S®RTM-K1), UART/RS-232/RS-422/RS-485 (R&S®RTM-K2), History and Segmented Memory (R&S®RTM-K15) and Mixed Signal Option (R&S®RTM-B1)

R&S®RTM3K-HVP4

Order Number 1335.9132P04

Descripción

High voltage power package (R&S®RTM3004, R&S®RT-ZHD60)

High voltage power package, contains base unit of R&S®RTM3004 and high voltage differential probe R&S®RT-ZHD60

R&S®RTM3K-HVP2

Order Number 1335.9132P02

Descripción

High voltage power package (R&S®RTM3002, R&S®RT-ZHD60)

High voltage power package, contains base unit of R&S®RTM3002 and high voltage differential probe R&S®RT-ZHD60

R&S®RTM3K-PS

Order Number 1335.9126P02

Descripción

Power supply package (R&S®RTM3004, -K31, R&S®RT-ZHD07, R&S®RT-ZC15B)

Power supply package, contains base unit of R&S®RTM3004, Power Analysis Option (R&S®RTM-K31), high voltage differential probe R&S®RT-ZHD07, and current probe R&S®RT-ZC15B

R&S®RTM3000 - Centro de contenido audiovisual

R&S®RTM3000 - Centro de contenido audiovisual

Ver más

Videos de aplicación de los osciloscopios - Centro de contenido audiovisual

Ver más

También le puede interesar

10 años de innovación con los osciloscopios de Rohde & Schwarz

Más información

Promoción de osciloscopios

Elija la promoción de Rohde & Schwarz que mejor se adapte a sus requerimientos y ahorre

Más información

Repositorio de webinars sobre osciloscopios para aplicaciones de diseño digital y electrónica de potencia

Más información

Software educativo para laboratorios con múltiples usuarios

R&S®CDS (Campus Dashboard Software) simplifica la enseñanza a grupos de estudiantes en laboratorios con múltiples mesas de trabajo.

Información del producto

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Deseo recibir información de Rohde & Schwarz por

Permiso de marketing

¿Qué significa esto exactamente?

Estoy de acuerdo con que ROHDE & SCHWARZ GmbH & Co. KG y la entidad o subsidiaria ROHDE & SCHWARZ que figure en la Declaración de confidencialidad del sitio web se ponga en contacto conmigo a través del canal elegido (correo electrónico o correo postal) para fines de marketing y publicitarios (p. ej., información sobre ofertas especiales y promociones de descuentos) en relación con, pero sin limitarse a, productos y soluciones para prueba y medición, comunicaciones seguras, monitoreo y pruebas de redes, broadcast y media así como ciberseguridad.

Sus derechos

Esta declaración de consentimiento se puede retirar en cualquier momento enviando un correo electrónico a news@rohde-schwarz.com con el asunto «Cancelar mi suscripción». Además, en cada correo electrónico enviado se incluye un enlace para cancelar por correo electrónico la suscripción a futuros anuncios. En la Declaración de privacidad encontrará información adicional sobre el uso de los datos personales y el procedimiento de retirada.

Se ha enviado su solicitud. Nos pondremos en contacto con usted en breve.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Términos y condiciones:

La convocatoria es válida del 5 de Abril al 20 de junio de 2021. Participan transmisores de radio FM y TV de cualquier marca que se encuentren aún en operación. Se tomarán válidos para participar los datos registrados solo durante ese periodo de tiempo, solo se puede llenar el formulario 1 vez por persona. El acceso a ingresar datos en el formulario se restringirá el día 21 de Junio a las 00:00hrs. El 30 de Junio de 2021 anunciaremos a un ganador de cada categoría en este mismo web, por correo electrónico y a través de nuestras redes sociales. Más informacion. Anamaria@rohde-schwarz.com

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y el correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente éstas tienen facultad para recibir los premios. No está permitida la participación de una persona individual por nombre y cuenta propia, sino que deberá hacerlo como representante de una persona jurídica llenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo tendrá lugar en la sede de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de no aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de llenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán por cuenta del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.