Let's talk IoT video series

How flexible numerology benefits the 5G air interface

Take a closer look into the air interface aspects of 5G. 5G provides a flexible numerology to support different services in the most efficient way.

Oct 16, 2019

Beamforming – a backbone of 5G

Get more information on beamforming, a well-established antenna technology that is a highly important, built-in capability in 5G NR.

Oct 16, 2019

Demystifying 5G – How a 5G UE accesses the 5G network

The video explains the 5G-LTE dual connectivity, how a 5G phone accesses the 5G network and shows the measurement software to follow the process.

Sep 24, 2019

Demystifying 5G – How fast is 5G in commercial networks?

The video shows data throughput measurements of a 5G router (connected to ROMES) and a 5G phone (with QualiPoc Android) in mmwave 5G networks with 4 times 100MHz bandwidth.

Sep 23, 2019

Demystifying 5G - What are the challenges?

Get an overview of the topics that we will cover during the seminar.

Aug 27, 2019

eCall (emergency call)

eCall is a European initiative intended to bring rapid assistance to motorists involved in a collision anywhere in the European Union.

Aug 12, 2019

How to meet 5G NR non-standalone (NSA) mode testing challenges

Get deeper information on one of the access procedures of 5G – the non-standalone mode.

Aug 01, 2019

Meeting the 5G NR testing challenges

The first episode of a new video series will take a look at where 5G is today, explore the unique challenges for test and measurement and discover innovative solutions such as the R&S CMX500 radio communication tester.

Aug 01, 2019

Industrialization within New Space

New Space brings a rapid change of testing in the satellite industry.

Jul 31, 2019

NPR Measurements

NPR is core measurement within the satellite industry used to measure the linearity of an active component or full transmission path or channel within a satellite communication link.

Jul 31, 2019

Co-existence of 5G and DVB-S2

How to perform qualification measurements on satellite components and systems.

Jul 31, 2019

Simulating multiple emitters

In operational situations, many emitter signals are present at the same time, and pulse-on-pulse situations can easily occur.

Jul 30, 2019

Simulating moving emitters

Simulating moving radar emitters is important in most test cases.

Jul 30, 2019

Simulating Angle of Arrival

Airborne, naval or land based platforms must have direction finding capability.

Jul 30, 2019

Cutting-edge radar signal simulation in the lab

The R&S®SMW200A vector signal generator together with the R&S®Pulse Sequencer software package is a powerful off the-shelf radar signal simulator.

Jul 24, 2019

Let’s talk IoT – 5G mMTC: What will happen with NB-IoT and LTE-M in 5G?

But today, everyone is talking about 5G mMTC. So what will happen with NB-IoT and LTE-M in 5G? This video provides the answer.

Jul 22, 2019

Demystifying 5G – 5G NR PTRS and how to emulate phase noise

The video explains the concept of PTRS and how they are used to compensate for the typical phase error (CPE) - caused by the impact of phase noise at higher frequencies (mmWave, FR2).

Jul 22, 2019

Let’s talk IoT – The easy way of lab testing under real world conditions

The video demonstrates the easy-to-use Field-to-Lab test solution from Rohde & Schwarz that brings real network conditions to the lab.

Jul 22, 2019

Demystifying 5G – How to generate and analyze 5G NR TDD signals?

The video demonstrates how to generate the uplink portion of a 5G NR TDD signal.

Jul 22, 2019

Demystifying 5G – System calibration basics for over-the-air (OTA) testing

The video provides high-level insights and theoretical background on system calibration.

Jul 22, 2019

Demystifying 5G – 5G NR test model (TM) support for FR1 and FR2

The example in the video shows the test model required to perform signal quality measurements such as error vector magnitude (EVM)

Jul 22, 2019

Demystifying 5G – How are slot formats defined in 5G NR?

Slot formats are a fundamentally new concept in 5G NR.

Jul 22, 2019

Demystifying 5G – Antenna array calibration using the R&S®SMW200A and R&S®FSW

The video demonstrates a direct measurement method for antenna array calibration to correct for relative amplitude and phase offsets.

Jul 22, 2019

Demystifying 5G – Calibrating OTA test systems using gain transfer method

The video demonstrates the gain transfer method in order to carry out repeatable and reliable over-the-air (OTA) measurements.

Jul 22, 2019

Demystifying 5G – Antenna array calibration methods for OTA testing

The video explains the theoretical background of antenna array calibration and discusses various methodologies including direct and indirect measurements.

Jul 22, 2019

Let’s talk IoT – The everlasting demand for optimizing IoT power consumption

The video explains these features and demonstrates how you can test and optimize the power consumption of your IoT device to achieve a 10 years battery life.

Jul 22, 2019

Demystifying 5G – Backpack for simultaneous 5G NR and LTE coverage measurements

The video introduces a compact backpack that is ideal to perform simultaneous network measurements of 5G NR in mmWave and sub 6 GHz frequencies.

Jul 04, 2019

Demystifying 5G – Concept of SSB beamforming in mmWave frequencies

The video explains the concept of synchronization signal blocks (SSB), how SSB beamforming works in sub 6 GHz and mmWave frequencies and how many different beams can be realized by the network infrastructure.

Jul 03, 2019

Demystifying 5G – Simultaneous coverage measurements on LTE and 5G NR at 28 GHz

The video demonstrates the simultaneous measurement of 5G NR signals in the mmWave frequency range at 28 GHz and LTE in sub 6 GHz using a single network scanner in a 5G backpack for coverage and beamforming tests.

Jul 01, 2019

Demystifying 5G – Frequency settings in 5G NR

The video provides insights into the channel raster and synchronization raster in 5G NR in order to explain how to perform coverage measurements for 5G non-standalone and standalone mode.

Jul 01, 2019

Demystifying 5G – Automatic channel detection (ACD) measurement for 5G NR

The video demonstrates how the automatic channel detection (ACD) option eases 5G coverage measurements even in the mmWave frequency range.

Jun 30, 2019

Satellite technology that benefits biology

The hub of the ICARUS system is the International Space Station (ISS). It travels in a virtually circular orbit.

Jun 12, 2019

Safe and secure transport in the air

These include aircraft radio direction finders, which report the precise position and direction of airplanes to air traffic controllers.

Jun 05, 2019

ATC in the trusted cloud

Rohde & Schwarz is the leading manufacturer of voice communications systems (VCS) and offers virtual center technology for air traffic control.

Jun 05, 2019

Spurious measurements

In order to measure the low levels of spurious emissions, it is often necessary to reduce the resolution bandwidth, which increases the measurement time. The R&S®FSW-K50 spurious measurement option automates spurious searches, which are performed faster than the standard spurious search measurements available in spectrum analyzers.

May 07, 2019

Network Performance Score - QoE evaluation

May 06, 2019

Network Performance Score - Overview and methodology

May 06, 2019

Network Performance Score - Demonstration of SmartAnalytics

May 06, 2019

High-End GNSS simulation with the R&S®SMW200A - Episode 4

Unintentional or intentional interference can significantly impair the reception of GNSS signals.

Apr 25, 2019

High-End GNSS simulation with the R&S®SMW200A - Episode 5

The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE.

Apr 25, 2019

High-End GNSS simulation with the R&S®SMW200A - Episode 6

This video shows how to perform advanced interferer simulations for testing multi-antenna GNSS receivers with anti-jam capabilities, also known as Controlled Reception Pattern Antennas (CRPAs).

Apr 25, 2019

The number one choice for customers

R&S®CLIPSTER enables them to keep pace with the evolution of image and audio.

Apr 17, 2019

5G Broadcast

Apr 03, 2019

Interview: NPS – the single QoE-centric network score from R&S

Mar 26, 2019

Interview: Quality of Experience in 5G?

Mar 25, 2019

Demystifying 5G – Clock input monitoring, holdover and relocking in 5G base stations

The video demonstrates an IDT clock generator and shows the measurement of phase transient during a locked-holdover-relocking-locked cycle. A clock signal with a defined phase noise profile is used to emulate the effect of a real-world clock with a non-ideal phase noise performance.

Mar 24, 2019

Demystifying 5G – Phase noise of clock and LO components in 5G base stations

The video demonstrates a clock generator and an RF synthesizer from IDT and shows the measurement of the phase noise, contributed by these components.

Mar 24, 2019

Demystifying 5G – Timing alignment and delay adjustment of SYSREF and sampling clock signals in 5G base stations

The video demonstrates a clock generator from IDT and shows the measurement of time alignment and delay adjustment of SYSREF and sampling clock signals.

Mar 24, 2019

Demystifying 5G - How to flexibly measure multiple SSB transmissions

The video demonstrates how to measure all synchronization signal blocks (SSBs) in different frequencies with all SSB indices.

Mar 18, 2019

Debugging and verification of SpaceWire links with the R&S® RTO2000 oscilloscope series

Feb 21, 2019

Smart platform

Feb 21, 2019

Wideband signal analysis in the mmWave range presented at EuMW 2017

Rohde & Schwarz demonstrated 5 GHz signal analysis bandwidth at the European Microwave Week 2017 in Nuremberg.

Feb 15, 2019

Clock and LO components in 5G base stations (part 2/3)

Learn how to verify the performance of RF sampling clock generator / jitter attenuator with low noise signal generator and high-performance oscilloscope.

Feb 10, 2019

Clock and LO components in 5G base stations (part 3/3)

Monitoring and relocking clock inputs are critical for the performance and the timing of 5G base station transceivers.

Feb 10, 2019

Clock and LO components in 5G base stations (part 1/3)

See how to achieve excellent phase noise measurement results with low noise signal generator and phase noise analyzer.

Feb 10, 2019

Power integrity best practice video

Feb 06, 2019

Continuous monitoring to achieve spectrum awareness

This video illustrates the rising demand for dense spectrum monitoring networks due to the technical evolution.

Jan 24, 2019

Interference Hunting

Jan 23, 2019

1000BASE-T1 cable testing according to OPEN Alliance TC9

A guide to perform cable testing based on unshielded twisted pair (UTP) for 1000BASE-T1 based on the OPEN Alliance TC9 specification.

Jan 03, 2019

World’s first 5G NR network measurement solution

Dec 10, 2018

Decoding automotive Ethernet and CAN using R&S scopes

A comparisson between CAN decoding on the R&S®RTM oscilloscope with automotive Ethernet decoding using the K57 option on the R&S®RTO oscilloscope.

Nov 28, 2018

Powerful 100BASE-T1 triggering

Triggering details for 100BASE-T1 Automotive Ethernet using the R&S®RTO with K57 option.

Nov 28, 2018

100BASE-T1 compliance testing - MDI return loss

A guide to carrying out a 100BASE-T1 compliance test for the MDI return loss using an R&S®ZND 2-port vector network analyser controlled by the ScopeSuite automation software.

Nov 28, 2018

Powerful 100BASE-T1 decoding

Decoding details for 100BASE-T1 Automotive Ethernet using the R&S®RTO with K57 option.

Nov 28, 2018

Demystifying 5G - How does 5G NR devices identify the network?

Learn how a UE is identified to be “5G NR capable” via an LTE base station and is informed where to search for a 5G NR base station (gNB) signal.

Nov 12, 2018

Demystifying 5G - 5G NR network measurements at 3.5 GHz

The video demonstrates how to perform 5G NR network measurements at 3.5 GHz. In the example shown, the R&S®SMW200A vector signal generator generates a 5G NR signal

Nov 12, 2018

Demystifying 5G – Configuring a 5G NR network measurement setup

This video explains how easy it is to configure the R&S®TSME6 network scanner.

Nov 12, 2018

How does SSB beamforming work in field?

This video discusses how beamforming for synchronization signals and broadcast channels works in 5G NR. It contains a replay of real field data collected in a pre-commercial 5G NR network trial.

Nov 08, 2018

1000BASE-T1 compliance testing - Test mode 2: MDI jitter and clock frequency

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 2 (MDI jitter and clock frequency) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis.

Oct 25, 2018

1000BASE-T1 compliance testing - Test mode 5: Transmitter power spectral density (PSD), power level and peak differential output

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 5 (transmitter power spectral density) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis.

Oct 25, 2018

1000BASE-T1 compliance testing - Test mode 6: Maximum output droop

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 6 (maximum output droop test) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis

Oct 25, 2018

1000BASE-T1 compliance testing - Test mode 4: Transmitter distortion test with disturber

A guide to carrying out a 1000BASE-T1 compliance tests with test mode 4 (transmitter distortion test with disturber) on an R&S®RTO. The video gives an overview of how to configure the setup and generate test reports for further analysis.

Oct 25, 2018

Testing the secure communication behavior of IoT devices

The video demonstrates how a unique test solution from Rohde & Schwarz can help to make IoT devices more secure and protect users’ privacy.

Sep 13, 2018

eSIM for M2M: what does it mean for testing?

The video shows the evolution of SIMs from a full-size SIM card introduced in 1991 to the embedded SIM (eSIM) for M2M.

Sep 13, 2018

NGeCall – an interesting application for IoT?

The video provides a prospect of how NGeCall can be used for much more IoT applications in the future.

Sep 13, 2018

RF testing of Sigfox modules and devices

The video shows how easy it is to perform some of the essential RF tests required for the certification of Sigfox modules and devices.

Sep 13, 2018

Modulation analysis of a 5G NR signal

This video shows the generation and analysis of a 5G New Radio signal at 28 GHz using the R&S®SMW200A vector signal generator and R&S®FSW signal and spectrum analyzer.

Sep 13, 2018

Cybersecurity video for it-sa 2018

Sep 12, 2018

Webinar: End-to-end satellite link testing

Sep 04, 2018

Webinar: Introduction to Ultra high definition (UHD) imaging

Sep 04, 2018

More webinars and videos

IoT Webinars

Curious how the Internet of Things will influence our daily lifes? Watch our IoT webinars to obtain a comprehensive technology outlook, to gain insights about further trends in cellular and non-cellular IoT and to learn more about major upcoming test challenges.

View more

Rohde & Schwarz at MWC 2018 - Videos

Didn't make it to the Mobile World Congress 2018 in Barcelona? Watch our short videos to discover our latest test and measurement innovations for mobile device and mobile network testing with focus on 5G, LTE-A Pro and IoT we had showcased.

View more