R&S®ZNH handheld vector network analyzer

Low in complexity, high in precision

R&S®ZNH full two-port handheld vector network analyzer
Abrir Lightbox
R&S® ZNH Front view
Abrir Lightbox
R&S® ZNH Front and side view
Abrir Lightbox
R&S® ZNH Front and side view
Abrir Lightbox
R&S® ZNH Rear view
Abrir Lightbox
R&S® ZNH measuring a bandpass filter
Abrir Lightbox
R&S® ZNH calibration with cable
Abrir Lightbox
R&S® ZNH calibration
Abrir Lightbox
R&S® ZNH with R&S®ZN-Z103
Abrir Lightbox
R&S® ZNH with R&S®ZN-Z103, top view
Abrir Lightbox
R&S® ZNH with R&S®NRP18S
Abrir Lightbox
R&S®ZNH full two-port handheld vector network analyzer R&S® ZNH Front view R&S® ZNH Front and side view R&S® ZNH Front and side view R&S® ZNH Rear view R&S® ZNH measuring a bandpass filter R&S® ZNH calibration with cable R&S® ZNH calibration R&S® ZNH with R&S®ZN-Z103 R&S® ZNH with R&S®ZN-Z103, top view R&S® ZNH with R&S®NRP18S

Key facts

  • Frequency range from 30 kHz to 4/8/18/26.5 GHz
  • One-port cable and antenna measurement with basic instrument
  • S-parameter (S11, S12, S21, S22) measurement with basic instrument
  • 100 dB (typ.) dynamic range for filter and antenna isolation measurements
  • Non-reflective display, small form factor, ruggedized housing (IP51)
  • R&S signal & spectrum analyzer | 3 years warranty extension

Lightweight design, heavyweight performance

R&S®ZNH is a full two-port handheld vector network analyzer that offers one-port cable and antenna measurement and full two-port S-parameter measurements. The touch based interface is simple to operate and a configuration overview menu makes measurement preparation more efficient. The R&S®ZNH may have a small form factor but it is complete in every detail and delivers high performance and all the key functionalities.

Features & benefits

Four receiver architecture

Sophisticated RF architecture provides access to latest calibration types

The four-receiver architecture consists of dedicated reference receivers and test receivers at both port 1 and port 2. This allows R&S®ZNH to support more advanced calibration types such as unknown through, open, short and match (UOSM) calibration. This calibration is useful for DUTs with different input or output connector types at the test ports.

R&S®ZNH
Open Lightbox

Four-receiver architecture

Minimal switching between the two ports and sophisticated calibration such as UOSM

Compact powerhouse

Outstanding RF performance in a small form factor

The portability and small footprint of the R&S®ZNH make it ideal for field measurements.

The R&S®ZNH also delivers high performance with the following features:

  • Wide frequency range of 30 kHz to 4/8/18/26.5 GHz to support a wide range of applications
  • High dynamic range of up to 100 dB (typ.) to measure large level variations
  • Highly accurate thanks to a low trace noise magnitude (RMS) of 0.0015 dB to 0.0040 dB (typ.) and a low trace noise phase (RMS) of 0.02° to 0.04° (typ.)
  • Built-in receiver step attenuator at both ports, which is adjustable in 5 dB steps from 0 dB to 15 dB
R&S®ZNH
Open Lightbox

Receiver step attenuator

Increases the linearity of the port input power range, which protects the analyzer against overloading.

Simple to operate

Multi-touch screen, remote control and measurement wizard for a top user experience

The multi-touch screen offers the standard pinch-to-zoom function available on smartphones. The R&S®ZNH supports typical phone control gestures, helping users feel at home. Even if operators cannot access the instrument directly, free PC, Android and iOS remote control apps are available for seamless operation. Furthermore, the measurement wizard helps simplify measurements with automated test sequences, speeding up the test process and reducing the potential for human error.

R&S®ZNH
Open Lightbox

Multi-touch function

Capacitive touchscreen; intuitive operation and no display calibration required.

Simple configuration

Simple and fast setup with configuration overview menu

The R&S®ZNH has both keys and a rotary knob as well as touchscreen controls. The keys are large and well spaced out, allowing easy operation when wearing gloves.

The capacitive touchscreen offers a new kind of user experience:

  • Directly interact with elements on the screen
  • Access menus quickly
  • Change frequency and span
  • Add/move/delete markers
  • And more


The configuration overview menu reduces the steps required to configure the measurement settings, enabling fast setup.

R&S®ZNH
Open Lightbox

Flexible calibration

User defined calibration sequences provide a flexible approach.

Simple to add value

Comprehensive standard features and simple option ordering

The R&S®ZNH basic unit includes:

  • Distance-to-fault measurements
  • One-port cable loss measurements
  • Reflection measurement
  • Transmission measurement
  • Four S-parameters (S11, S21, S12, S22)


When additional functions are needed, the options are easy to order. All the options can be ordered transparently and independently, meaning no hidden costs and no confusion when ordering.

R&S®ZNH
Open Lightbox

Quick setup of S-parameter display in desired format.

Four S-parameter measurements provided as standard.

Available models

Available models

  • Model name

    R&S®ZNH4

    Order number 1321.1611.04

    Frequency Range
    4 GHz
    Number of ports
    2
    CAT functionality
    standard
    S-parameter
    standard
    RF connector
    N
    Starting at
  • Model name

    R&S®ZNH8

    Order number 1321.1611.08

    Frequency Range
    8 GHz
    Number of ports
    2
    CAT functionality
    standard
    S-parameter
    standard
    RF connector
    N
    Starting at
  • Model name

    R&S®ZNH18

    Order number 1321.1611.18

    Frequency Range
    18 GHz
    Number of ports
    2
    CAT functionality
    standard
    S-parameter
    standard
    RF connector
    N
    Starting at
  • Model name

    R&S®ZNH26

    Order number 1321.1611.26

    Frequency Range
    26.5 GHz
    Number of ports
    2
    CAT functionality
    standard
    S-parameter
    standard
    RF connector
    PC 3.5mm
    Starting at

Available options

General analysis
Product Description
ZNH-Handheld-vector-network-analyzer-K9.png

R&S®ZNH-K9

Order number 1334.6800.02

Description

Power sensor support

ZNH-Handheld-vector-network-analyzer-K10.png

R&S®ZNH-K10

Order number 1334.6846.02

Description

DC bias variable voltage source

ZNH-Handheld-vector-network-analyzer-K29.png

R&S®ZNH-K29

Order number 1334.6823.02

Description

Pulse measurements with power sensor

ZNH-Handheld-vector-network-analyzer-K45.png

R&S®ZNH-K45

Order number 1334.6852.02

Description

Vector voltmeter

ZNH-Handheld-vector-network-analyzer-K66.png

R&S®ZNH-K66

Order number 1334.6869.02

Description

Wave ratios wave quantities

Calibration kits
Product Description

R&S®ZCAN

Order number 0800.8515.52

Description

Calibration Kit, 0 Hz to 3 GHz, N, 50 Ω

R&S®ZCAN

Order number 0800.8515.72

Description

Calibration Kit, 0 Hz to 3 GHz, N, 75 Ω

FSH-Z28_front.jpg

R&S®FSH-Z28

Order number 1300.7810.02

Description

Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement

DC to 8 GHz for R&S®FSH

FSH-Z29 - calibration

R&S®FSH-Z29

Order number 1300.7510.03

Description

Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement

DC to 3.6 GHz forR&S®FSH4/R&S®FSH8

Calibration units
Product Description
ZN-Z103 Calibration Unit

R&S®ZN-Z103

Order number 1321.1828.02

Description

Calibration unit, 1 port, N (f), 2 MHz to 4 GHz

R&S®ZN-Z103

Order number 1321.1828.12

Description

Calibration unit, 1 port, N (f), 1 MHz to 6 GHz

R&S®ZN-Z170

Order number 1328.8163.02

Description

Calibration Kit, 0 Hz to 18 GHz, N (m), 50 Ω

R&S®ZN-Z170

Order number 1328.8163.03

Description

Calibration Kit, 0 Hz to 18 GHz, N (f), 50 Ω

R&S®ZN-Z135

Order number 1328.8157.02

Description

Calibration Kit, 0 Hz to 26.5 GHz, 3.5 mm (m), 50 Ω

R&S®ZN-Z135

Order number 1328.8157.03

Description

Calibration Kit, 0 Hz to 26.5 GHz, 3.5 mm (f), 50 Ω

Test cables
Product Description
ZV-Z93_front.jpg

R&S®ZV-Z93

Order number 1301.7595.25

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 635 mm (25 in)

ZV-Z93_front.jpg

R&S®ZV-Z93

Order number 1301.7595.38

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 965 mm (38 in)

R&S®ZV-Z95

Order number 1301.7608.25

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 635 mm (25 in)

R&S®ZV-Z95

Order number 1301.7608.38

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 965 mm (38 in)

R&S®ZV-Z191

Order number 1306.4507.24

Description

Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 610 mm (24 in)

R&S®ZV-Z191

Order number 1306.4507.36

Description

Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 914 mm (36 in)

R&S®ZV-Z192

Order number 1306.4513.24

Description

Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 610 mm (24 in)

R&S®ZV-Z192

Order number 1306.4513.36

Description

Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 914 mm (36 in)

ZV-Z193 Test port cable

R&S®ZV-Z193

Order number 1306.4520.24

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 610 mm (24 in)

ZV-Z193 Test port cable

R&S®ZV-Z193

Order number 1306.4520.36

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 914 mm (36 in)

ZV-Z193 Test port cable

R&S®ZV-Z193

Order number 1306.4520.60

Description

Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 1524 mm (60 in)

R&S®ZV-Z195

Order number 1306.4536.24

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 610 mm (24 in)

R&S®ZV-Z195

Order number 1306.4536.36

Description

Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) - 2.92 mm (m), length 914 mm (36 in)

Recommended extras
Product Description

R&S®FSH-Z320

Order number 1309.6600.00

Description

RF cable (length: 1 m), DC to 8 GHz, armored, N male/N female connectors

for [[productaliasshort:FSH-K41]] option

R&S®FSH-Z321

Order number 1309.6617.00

Description

RF cable (length: 3 m), DC to 8 GHz, armored, N male/N female connectors

for R&S®FSH-K41 option

R&S®RDL50

Order number 1035.1700.52

Description

High-Power Attenuator, 50 W

0 Hz to 6 GHz, 20 dB

R&S®RBU100

Order number 1073.8495.03 (3 dB) / 1073.8495.06 (6 dB) / 1073.8495.10 (10 dB) / 1073.8495.20 (20 dB) / 1073.8495.30 (30 dB)

Description

High-Power Attenuator, 100 W

0 Hz to 2 GHz

HA-Z340 GPS receiver

R&S®HA-Z340

Order number 1321.1392.02

Description

GPS Receiver for R&S®Spectrum Rider

RAM_front.jpg

R&S®RAM

Order number 0358.5414.02

Description

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

RAZ_front.jpg

R&S®RAZ

Order number 0358.5714.02

Description

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®FSH-Z38

Order number 1300.7740.02

Description

Matching pad 50/75 Ω, L section, N to BNC

bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W

R&S®Adapter BNC N

Order number 0118.2812.00

Description

N - BNC Adapter (N male - BNC female)

R&S®Adapter N

Order number 0092.6581.00

Description

N - Adapter (N male - N male)

R&S®Adapter SMA N

Order number 4012.5837.00

Description

N- Adapter (N male - SMA female)

R&S®Adapter N1 6 F

Order number 3530.6646.00

Description

N - Adapter (N male - 7/16 female)

R&S®Adapter N 16 M

Order number 3530.6630.00

Description

N - Adapter (N male - 7/16 male)

R&S®Adapter N FME F

Order number 4048.9790.00

Description

N - Adapter (N male - FME female)

R&S®Adapter N BNC M

Order number 0017.6742.00

Description

N - BNC Adapter (BNC male - banana female)

HA-Z303 Battery Charger

R&S®HA-Z303

Order number 1321.1328.02

Description

Battery charger for R&S®HA-Z306

The battery charger is to be used for charging an additional battery outside the instrument. The internal battery is charged by the instrument itself.

HA-Z306 Lithium Ion Battery Pack

R&S®HA-Z306

Order number 1321.1334.02

Description

Lithium-ion battery pack, 6.4 Ah

HA-Z301-Spare-power-supply

R&S®HA-Z301

Order number 1321.1386.02

Description

Spare power supply, incl. mains plug for EU, UK, US, AUS, CH

HA-Z302 Car Adapter for cigarette lighter

R&S®HA-Z302

Order number 1321.1340.02

Description

Car adapter for cigarette lighter

The car adapter is suitable for both the instrument and the R&S®HA-Z303 external battery charger.

Reduces instrument rating to CAT III 300 V / CAT II 600 V during charging.

HA-Z322 Carrying holster

R&S®HA-Z322

Order number 1321.1370.02

Description

Carrying holster

HA-Z322 Rainproof carrying holster

R&S®HA-Z322

Order number 1321.1370.03

Description

Rainproof carrying holster

HA-Z220 Carrying Bag

R&S®HA-Z220

Order number 1309.6175.00

Description

Carrying bag

soft carrying bag

HA-Z321 Hard case

R&S®HA-Z321

Order number 1321.1357.02

Description

Hard Case for R&S®Spectrum Rider

RTH-Z4 Hard Shell Protective Carrying Case

R&S®RTH-Z4

Order number 1326.2774.02

Description

Hard shell protective carrying case

Dimensions: 455 mm x 368 mm x 166 mm. Weight: 2.5 kg.

HA-Z211 Spare USB cable

R&S®HA-Z211

Order number 1309.6169.00

Description

Spare USB cable

HA-Z210 Spare Ethernet cable

R&S®HA-Z210

Order number 1309.6152.00

Description

Spare LAN cable

Power sensors
Product Description
FSH-Z14_front.jpg

R&S®FSH-Z14

Order number 1120.6001.02

Description

Directional power sensor

25 MHz to 1 GHz

FSH-Z44_front.jpg

R&S®FSH-Z44

Order number 1165.2305.02

Description

Directional power sensor

200 MHz to 4 GHz

NRPZ211_front.jpg

R&S®NRP-Z211

Order number 1417.0409.02 / 1417.0409.04

Description

Two-Path diode power sensors

Universal power sensor, 10 MHz to 8 GHz, 100 mW, two-path

Measurement range: -60 dBm to +20 dBm,
Frequency range: 10 MHz to 8 GHz,
N connector

NRPZ221_front.jpg

R&S®NRP-Z221

Order number 1417.0309.02

Description

Two-Path Diode Power Sensors

Universal power sensor, 10 MHz to 18 GHz, 100 mW, two-path

Measurement range: -60 dBm to +20 dBm,
Frequency range: 10 MHz to 18 GHz,
N connector

NRP8S_img.jpg

R&S®NRP8S

Order number 1419.0006.02

Description

Three-path diode power sensor

For USB operation

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 8 GHz
N (m) connector

NRP18S_front.jpg

R&S®NRP18S

Order number 1419.0029.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 18 GHz
N (m) connector

NRP33S_front.jpg

R&S®NRP33S

Order number 1419.0064.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 200 mW
Frequency range: 10 MHz to 33 GHz
3.5 mm (m) connector

NRP40S_img.jpg

R&S®NRP40S

Order number 1419.0041.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 100 mW
Frequency range: 50 MHz to 40 GHz
2.92 mm (m) connector

NRP50S_img.jpg

R&S®NRP50S

Order number 1419.0087.02

Description

Three-Path Diode Power Sensor

For USB operation

Measurement range: 100 pW to 100 mW
Frequency range: 50 MHz to 50 GHz
2.4 mm (m) connector

NRP18T_Thermal_power_sensor_img1.jpg

R&S®NRP18T

Order number 1424.6115.02

Description

Thermal power sensor

300 nW to 100 mW, DC to 18 GHz

NRP33T_Thermal_power_sensor_img1.jpg

R&S®NRP33T

Order number 1424.6138.02

Description

Thermal Power Sensor

300 nW to 100 mW, DC to 33 GHz

NRP40T_Thermal_power_sensor_img1.jpg

R&S®NRP40T

Order number 1424.6150.02

Description

Thermal Power Sensor

300 nW to 100 mW, DC to 40 GHz

NRP50T_Thermal_power_sensor_img1.jpg

R&S®NRP50T

Order number 1424.6173.02

Description

Thermal Power Sensor

NRP67T_Thermal_power_sensor_img1.jpg

R&S®NRP67T

Order number 1424.6196.02

Description

Thermal Power Sensor

R&S®NRP90T

Order number 1424.6473.02

Description

Thermal Power Sensor

NRP110T_Thermal_power_sensor_img1.jpg

R&S®NRP110T

Order number 1424.6215.02

Description

Thermal Power Sensor

NRP6A_Average_power_sensors_img1.jpg

R&S®NRP6A

Order number 1424.6796.02

Description

Average Power Sensor

100 pW to 200 mW, 8 kHz to 6 GHz

NRP18A_Average_power_sensors_img1.jpg

R&S®NRP18A

Order number 1424.6815.02

Description

Average Power Sensor

100 pW to 200 mW, 8 kHz to 18 GHz

Wideband power sensors
Product Description
NRPZ81_front.jpg

R&S®NRP-Z81

Order number 1137.9009.02

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 18 GHz,
N connector

NRPZ85_front.jpg

R&S®NRP-Z85

Order number 1411.7501.02

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 40 GHz,
2.92 mm connector

NRPZ86_front.jpg

R&S®NRP-Z86

Order number 1417.0109.40

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 40 GHz,
2.4 mm connector

NRPZ86var44_front.jpg

R&S®NRP-Z86 model .44

Order number 1417.0109.44

Description

Wideband Power Sensor

Time domain analysis and automatic pulse analysis for radar applications and universal use

Measurement range: -60 dBm to +20 dBm,
Frequency range: 50 MHz to 44 GHz,
2.4 mm connector

Power sensors & adapter cables
Product Description
FSH-Z144 USB adapter cable

R&S®FSH-Z144

Order number 1145.5909.02

Description

USB adapter cable

for R&S®FSH-Z14/R&S®FSH-Z44 power sensors

R&S®NRP-Z4

Order number 1146.8001.02 / 1146.8001.04 / 1146.8001.06 / 1146.8001.11

Description

USB Adapter (passive)

For all R&S®NRP-Z sensors. The R&S®NRPZ4 passive USB adapter provides all basic functions, as it handles the transmission of settings and measurement data as well as the power supply of the sensor via the USB bus. Available cable lengths: Available cable lengths: 2.0m, 0.5m and 0.15m Available cable length for panel-mount: 1m

NRP-ZKU USB interface cable

R&S®NRP-ZKU

Order number 1419.0658.03

Description

USB interface cable, length: 1.5 m

Optical power sensor and accessories
Product Description
HA-Z360-OEM-USB-Optical-Power-Meter

R&S®HA-Z360

Order number 1334.5162.00

Description

OEM USB Optical Power Meter (Germanium)

HA-Z361-OEM-USB-Optical-Power-Meter

R&S®HA-Z361

Order number 1334.5179.00

Description

OEM USB Optical Power Meter (filtered InGaAs)

HA-Z362-SC-Adapter

R&S®HA-Z362

Order number 1334.5185.00

Description

SC Adapter for Optical Power Meter

HA-Z363-LC-Adapter

R&S®HA-Z363

Order number 1334.5191.00

Description

LC Adapter for Optical Power Meter

HA-Z364-2.5-mm-Universal-Adapter

R&S®HA-Z364

Order number 1334.5204.00

Description

2.5 mm Universal Adapter for Optical Power Meter

HA-Z365 Universal adapter for optical power meter

R&S®HA-Z365

Order number 1334.5210.00

Description

1.25 mm Universal Adapter for Optical Power Meter

HA-Z366-Patch-Cord

R&S®HA-Z366

Order number 1334.5227.00

Description

Patch Cord SC-LC SM, SX, length: 1 m

HA-Z367 Patch Cord

R&S®HA-Z367

Order number 1334.5233.00

Description

Patch Cord SC-SC SM, SX, length: 1 m

Further information

Spectrum & Vector network analyzers promotion

Widest variety of fully equipped products up to 48% off, now until March 31st, 2021

More information

Mobile network testing

Mobile network testing solutions from Rohde & Schwarz let you reconcile your current and future dilemmas.

More information

Teaching-Software for Multi-User Student Labs

The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.

More information

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Deseo recibir información de Rohde & Schwarz por

Permiso de marketing

¿Qué significa esto exactamente?

Estoy de acuerdo con que ROHDE & SCHWARZ GmbH & Co. KG y la entidad o subsidiaria ROHDE & SCHWARZ que figure en la Declaración de confidencialidad del sitio web se ponga en contacto conmigo a través del canal elegido (correo electrónico o correo postal) para fines de marketing y publicitarios (p. ej., información sobre ofertas especiales y promociones de descuentos) en relación con, pero sin limitarse a, productos y soluciones para prueba y medición, comunicaciones seguras, monitoreo y pruebas de redes, broadcast y media así como ciberseguridad.

Sus derechos

Esta declaración de consentimiento se puede retirar en cualquier momento enviando un correo electrónico a news@rohde-schwarz.com con el asunto «Cancelar mi suscripción». Además, en cada correo electrónico enviado se incluye un enlace para cancelar por correo electrónico la suscripción a futuros anuncios. En la Declaración de privacidad encontrará información adicional sobre el uso de los datos personales y el procedimiento de retirada.

Se ha enviado su solicitud. Nos pondremos en contacto con usted en breve.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y el correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente éstas tienen facultad para recibir los premios. No está permitida la participación de una persona individual por nombre y cuenta propia, sino que deberá hacerlo como representante de una persona jurídica llenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo tendrá lugar en la sede de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de no aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de llenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán por cuenta del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.