TDOA and AOA hybrid geolocation system

TDOA and AOA hybrid geolocation systems

The best of both worlds

Locating transmitters is an essential mission for all regulators and organizations that are assigned radio monitoring tasks. This pertains especially to unlicensed and illegal transmitters as well as stations interfering with other radio services. Traditionally, direction finders have been used for location tasks. New solutions, based on the time difference of arrival (TDOA) principle are an excellent complement to classical DF systems.

TDOA - the concept

Prerequisite for a TDOA-based location is a sufficient number of receivers in the vicinity of the transmitter. Since these receivers are at slightly different distances from the transmitter, the same signal reaches them at slightly different times. Based on these time differences, the location of the transmitter is calculated. Given that electromagnetic waves propagate at approx. 300 000 km/s, the time accuracy of the system has to be in the nanosecond range.

The different geolocation methods

Congested signal environment
Congested signal environment
Geolocation using AOA method
Geolocation using AOA method
Geolocation using TDOA method
Geolocation using TDOA method
The best of both worlds - hybrid geolocation
The best of both worlds - hybrid geolocation

TDOA – the Rohde & Schwarz way

  • The excellent sensitivity of the system provides a high signal-to-noise ratio (SNR). This leads automatically to higher location accuracy. Furthermore, higher SNR compensates inaccuracies due to smaller signal bandwidths. Thus, narrowband signals are located much more precisely or even found at all. Thanks to the superior overall performance of the equipment, it is extremely well suited for operation in dense urban environments. There, TDOA is very advantageous but the signal scenario is very challenging for the devices.
  • TDOA, angle of arrival (AOA) and even a hybrid solution are possible, offering always the best option for each task.In the case of direction finders, the same device can even serve as a TDOA receiver or classical DF.
  • The equipment is available for sophisticated, ITU-compliant monitoring tasks when no location mission is running. While locating transmitters is an important task, experience shows that only a minor fraction of time is spent for it. The system is used to the greatest possible extent.
  • The time a signal takes to travel within the device from the antenna input to the signal processing stage is taken into account when issuing the timestamp. This unique Rohde & Schwarz development provides higher location accuracy. In addition, it makes it possible to freely combine all TDOA-capable equipment.

Hybrid: TDOA and AOA – the best of both worlds

Both principles, TDOA and AOA have their respective advantages. TDOA works well with broadband emissions, typical for modern communications signals like DVB-T, DAB, LTE, or WiMAX™. The concept of TDOA even allows compensating effects of reflection and multipath propagation, making it especially powerful in dense urban environments. AOA has its strengths when it comes to narrowband, unmodulated or continuous-wave (CW) signals.

Consequently, the perfect system would integrate TDOA and AOA, where the operator decides case by case which one is better suited or even selects a combination of both. That is exactly what the new hybrid TDOA-AOA solutions from Rohde & Schwarz provide: the best of both worlds.

Further information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Deseo recibir información de Rohde & Schwarz por

¿Qué significa esto exactamente?

Estoy de acuerdo con que ROHDE & SCHWARZ GmbH & Co. KG y la entidad o subsidiaria ROHDE & SCHWARZ que figure en la Declaración de confidencialidad del sitio web se ponga en contacto conmigo a través del canal elegido (correo electrónico o correo postal) para fines de marketing y publicitarios (p. ej., información sobre ofertas especiales y promociones de descuentos) en relación con, pero sin limitarse a, productos y soluciones para prueba y medición, comunicaciones seguras, monitoreo y pruebas de redes, broadcast y media así como ciberseguridad.

Sus derechos

Esta declaración de consentimiento se puede retirar en cualquier momento enviando un correo electrónico a news@rohde-schwarz.com con el asunto «Cancelar mi suscripción». Además, en cada correo electrónico enviado se incluye un enlace para cancelar por correo electrónico la suscripción a futuros anuncios. En la Declaración de privacidad encontrará información adicional sobre el uso de los datos personales y el procedimiento de retirada.

Gracias.

Su equipo Rohde & Schwarz

An error is occurred, please try it again later.